注射模具

塑料注射模具冷却水道CAD

Cooling waterway CAD for plastic injection mold

基于Pro/E的大型活塞环注射模具CAD系统的开发

Development of CAD System on Injection Mold for Large Piston Ring Based on Pro / E

CAD参数化设计在注射模具中的应用

Application of CAD parameterized design in the injection mould

基于参数化注射模具结构CAD图形库系统

CAD graph base system for parametric injection mould structure

注射模具CAD制图标准体系

Standards system for CAD drawing in the injection mould

模拟注射模具传统设计方法的CAD系统

A CAD System for Simulating the Conventional Method of the Injection Mould Design

基于AutoCAD的三维塑料注射模具结构CAD系统的开发

Development of 3D Plastic Injection Mould Structure CAD System Based on AutoCAD Platform

CAE在注射模具缺陷分析中的应用与研究

Application and Study of CAE in the Defective Analysis of Injection Mold

介绍了应用Solidedge软件，建立三维模型以及设计注射模具的方法。

The application of Solid Edge software , the building of 3D model , and the method of injection mold design were introduced .

基于UG的三通管件注射模具的设计与制造

Design and Manufacture of Injection Mould for Tee-fitting Based on UG

并重点介绍了在装配环境中利用SolidEdgeMoldTooling功能，设计注射模具的过程。

And mainly introduced the steps of injection mold design using the function of Solid Edge Mold Tooling in assemble condition .

基于CAE与RP的快速制造注射模具技术研究

Study on the Technology of Rapid Injection Mold Manufacturing Based on CAE and RP

BMC塑封电机定子精密注射模具技术研究

Study of Precise Injection Moulding for BMC Plastics Packed Stator

还介绍了CAE技术在精密注射模具排气系统设计上的应用。

And the application of CAE technology in the design of the venting system of precise injection moulds are introduced .

在分析注射模具工艺设计和CAPP特点的基础上，提出了面向注射模具的CAPP开发方法。

On the basis of the analysis of the technological design of the injection moulds and the characteristics of CAPP , the development method of CAPP for injection moulds was proposed .

以VISUALBASIC6.0为工具建立的注射模具CAD制图标准查询系统，可用于CAD设计注射模具所需的CAD制图标准、机械制图标准、设计标准等各种标准的查询。

The system is developed by Visual Basic 6.0 . It can be used for searching standards of CAD , standards of mechanic drawing and design standards and so on , which are needed in CAD in injection mould .

通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析，选择聚丙烯的成型工艺参数，设计了一模一腔的注射模具。

An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene .

在具体模具设计过程中，由于浇注系统设计是否合理在同模异穴注射模具中起着极其重要的作用，本文重点研究模具CAE技术在浇注系统流动平衡设计中的应用。

In the specific mold design process , because gating system design is reasonable different points in the same mold injection mold plays an important role , this article focuses on mold CAE technology in the gating system design flow balance .

以275L电冰箱菜果室注射模具的断裂和返修，叙述了模具强度问题的重要性。

This article emphasizes the importance of the mould strength according to the discussion on the mould crack and repairing for the 275L refrigerator salad drawer .

电脑机箱零件三板式注射模具设计

Design of Three-plate Injection Mold for the Part of Computer Case

注射模具冷却系统设计的计算程序

Calculation program of the cooling system design for the injection mould

周转箱塑件热流道注射模具设计

Design of Injection Mold with Hot Runners for Plastics Turnover Boxes

气体辅助注射模具设计及气针选择

Design of gas-assisted injection mould and its selection of gas pins

点滴瓶瓶塞注射模具设计

Design of the injection mould for the bung of dropping bottle

浅谈塑料注射模具浇道设计

Brief Introduction of Pouring Channel Design for Plastic Injected Model

塑料注射模具型腔型芯的计算机辅助设计

Computer aided design of the core and cavity of plastic injection mould

Moldflow/MPI在注射模具优化设计中的应用

The Application of Moldflow / MPl in Optimizing Design of Injection Mold

注射模具三维参数化标准件库的开发

Developing of 3D parametric standard parts library of injection molding

塑料注射模具冷却系统的设计

The research of cooling system design in plastic injection mould

塑料工件周转箱注射模具设计

Design of injection mould of turnover box of plastic workpiece