氧化物陶瓷
- 网络oxide ceramic
-
对玻璃陶瓷、Ti3SiC2、Si3N4、SiC及氧化物陶瓷等多种可加工陶瓷材料进行了简单介绍。
The machinable ceramics such as glass-ceramic , Ti_3 SiC_2 , Si_3 N_4 , SiC and oxide ceramics are briefly introduced .
-
复合氧化物陶瓷在Na3AlF6Al2O3熔体中的溶解性
Solubility of composite oxide ceramics in Na_3AlF_6-Al_2O_3 melts
-
ITO靶材热等静压致密化工艺研究铟锡氧化物陶瓷靶材热等静压致密化研究
Investigation on hip technique for densification of indium tin oxide ceramic target
-
NiFe2O4复合氧化物陶瓷粉体的制备
Preparation of NiFe_2O_4 composite oxides ceramic powder
-
在基于SL原型的快速精铸氧化物陶瓷型壳制备工艺中,型壳的焙烧常常出现开裂现象。
The cracking usually occurs in the preparation process of a quick precision casting oxide ceramic shell .
-
基于SL原型的快速精铸氧化物陶瓷型壳制备工艺研究
Research Related to the Preparation Process of Rapid Precision Casting Oxide Ceramic Shell Based on SL Pattern
-
纳米xBaO·(0.35-x)Nd2O3·0.65TiO2复合金属氧化物陶瓷的制备与介电性能
Preparation and Dielectric Properties of Nanometer Complex Oxide xBaO ·( 0.35-x ) Nd_2O_3 · 0.65TiO_2
-
研究表明:电解溶液中加入NaF可加速氧化物陶瓷膜的形成,提高其硬度。
Results showed that formation of oxide ceramic coatings was accelerated by addition of NaF and hardness improved as well .
-
用扫描电镜(SEM),能量散射谱仪(EDS),X射线光电子能谱仪(XPS)对氧化物陶瓷膜的微观结构与组成进行了分析。
The structure and composition of MAO coatings were analyzed by scanning electron microscopy ( SEM ) with energy dispersive spectroscopy ( EDS ) and X-ray photoelectron spectroscopy ( XPS ) .
-
本文利用Zeta电位测定结果和沉降实验结果,讨论了氧化物陶瓷微粉悬浮液的稳定性能。
The stability of oxide ceramic ultrafine powders suspending in liquid has been discussed by use of Zeta potential measuring and subsiding experimental results .
-
敏正电子的NTC热敏电阻器系由特殊配置的金属氧化物陶瓷材料制成,它可用来抑制高的突波电流。
Shanghai mec electronic NTC Thermistor devices are made of a specially formulated metal oxide ceramic material which is capable of suppressing high inrush current surges .
-
研究了溶胶-凝胶法在碳纤维上涂覆TiO2氧化物陶瓷的连续工艺,采用了IR、TG-DTA、XRD、SEM等分析表征手段。
Further study focused on dipping TiO 2 oxide coating on carbon fibers by sol gel continous processing and fabrication of CF / Al performed wire . Some characterization methods such as IR , TG DTA , XRD , SEM were used .
-
通过TG-DTA、X衍射对氧化物陶瓷型壳的面层和背层进行了分析,测试了陶瓷型壳的常温、高温力学性能和热膨胀系数,对型壳试样的断口进行了SEM观察。
Face and back coating materials of ceramic shells were analysed by TG-DTA and X ray diffraction . Room temperature and elevate temperature mechanical properties and coefficient thermal expansion were measured . Fracture morphology of shells were observed by SEM .
-
多孔材料的材质为SiC、SiC/Si、SiC/C、SiC/MoSi2、SiCN、BN等非氧化物陶瓷。
As for the composition of the porous materials , 6 kinds of non-oxide ceramics were investigated : SiC , SiC / Si , SiC / C , SiC / MoSi_2 , SiCN and BN . Template technique is the key point in the fabrication of ordered macroporous materials .
-
氧化物陶瓷超导体原料粉末的先进制造技术
An Advanced Manufacturing Technology of Raw Powder of Ceramic Oxide Superconducts
-
钛熔模精铸用氧化物陶瓷型壳制壳工艺的研究
Research on Oxide Ceramic Shell Molding Technology for Titanium Casting
-
新型钛精铸氧化物陶瓷型壳工艺研究
New Oxide Ceramic Shell Mould Technology for Titanium Investment Castings
-
复合氧化物陶瓷材料在较低温度下的催化性能
Catalytic Action of Composite Oxide Ceramic Material at Low Temperature
-
氧化铝是一种重要的氧化物陶瓷材料。
Alumina is a kind of oxide ceramic materials of great significance .
-
介绍了微波处理非氧化物陶瓷的近期进展。
The latest development on microwave processing of non-oxide ceramics was introduced .
-
金属氧化物陶瓷/银复合材料的电学性能研究
Study on Electrical Behaviors of Metal - Oxide Ceramic / Silver Composite
-
钙钛矿型复合氧化物陶瓷膜的制备及其透氧性能
Preparation and oxygen permeability of perovskite-type composite oxide ceramic membrane
-
激光熔覆氧化物陶瓷涂层的微观组织
Microstructure of the laser - clad oxide ceramic coating
-
高温金属氧化物陶瓷湿敏传感器研究
Study on the ceramics humidity sensor for high temperature
-
氧化物陶瓷与金属的活性钎焊工艺及其机理研究
Study on Technology and Mechanism of Active Brazing between Oxide Ceramics and Metal
-
氧化物陶瓷与Ag-Cu-Ti钎料的界面反应
Interfacial reaction of oxide ceramics with ag-cu-ti alloy
-
拟抛物面规则在氧化物陶瓷相图中的应用
Application of the quasi - paraboloidal regulations of intermediate compounds in ceramic ternary systems
-
氧化物陶瓷超导材料的研究进展
Development of Researches on Oxide Ceramic Superconducting Materials
-
铟锡氧化物陶瓷靶的现状
Present Situation of Indium Tin Oxide Ceramic Rake
-
氧化物陶瓷模具在电池生产中的应用
Application of ceramic oxide in battery production