显微分析

压铸轮毂机加工表面针孔的显微分析

Microscopic analysis to pin hole on machining surface of die-casting hub

这与显微分析相一致。

This is identical to the microscopic analysis .

电镜X射线显微分析法在继发性血色病研究中的运用

Application of Electron Microscopic X-ray Microanalysis in Secondary Hemochromatosis

应用电镜X射线显微分析方法研究神经细胞内钙离子的分布

Studies on neuronal calcium localization by using electron microscopy with X-ray microprobe analysis

纳米Fe2O3颗粒填充UHMWPE复合材料摩擦表面的原子力显微分析

AFM analysis of micro-wear mechanisms in nano-Fe_2O_3 particle reinforced UHMWPE composite

WNiFe合金电子探针显微分析

Electron Probe Microanalysis of W-Ni-Fe Alloy

用金相显微分析、扫描电镜能谱分析、X射线衍射分析等方法研究了渗层的成分、相结构和组织。

Studied chemical composition , phase , structure and microstructure of coating by metallographic analysis , EDAX and X-ray diffraction analysis .

并运用扫描电子显微分析和X射线计算机断层图像分析对纤维微观形貌和混合料骨架进行观测。

The technologies of scanning electron microscopy and X-ray computerized tomography was adopted to observe the microstructure of the fibers and inner skeleton of porous asphalt .

TiB2-TiB/Fe金属陶瓷复合涂层原位合成及显微分析

In-situ synthesis and microanalysis of TiB_2-TiB / Fe metal-ceramics composite coating

X射线显微分析结果指出，于包涵体的中心区和周边区以及溶酶体和胞质基质中都不产生pb元素峰。

The X-ray microanalysis showed that both the central part and the peripheral part of the intranuclear inclusions , lysosomes and cytoplasmic matrix gave no lead peak .

本文采用DSC分析和偏光显微分析方法研究了PP／EPDM／滑石粉共混填充体系的结晶熔融行为。

Crystallization and melting behavior of PP / EPDM / Talc are studied with the aid of DSC analysis and polarizing microscope analysis .

通过氧化实验、X射线衍射分析和扫描电子显微分析，初步研究了PNA基炭纤维的氧化特性。

The oxidation behaviour of the PAN based carbon fibers ( CF ) has been studied by oxidation experimental ? XRD and SEM analysis .

用电子探针显微分析法，研究了AgI-Ag4P2O7非晶态快离子导体中的银沉积问题。

The silver deposition in amorphous fast ionic conductor AgI-Ag_4P_2O_7 has been investigated by EPMA and the counting rate curves were given .

采用恒电流沉积法，在含有NdCl3的酸性镀液中获得了不同Nd含量的FeNdP合金镀层.利用电子显微分析、能谱分析研究了镀层的形貌及成分。

The Fe-Nd-P alloy deposits with different Nd content were obtained by electrodeposition from acidic solution containing NdCl_3 at constant current density , and their morphologies and components were studied by SM and EDS.

通过X射线衍射分析、SEM显微分析、DTA热分析以及力学性能测试等分析手段分析了材料的性能和显微结构。

Mechanical properties and microstructure of glass ceramics were investigated by means of X-ray diffraction ( XRD ) scanning electron microscopy ( SEM ) thermal analysis ( DTA ) and mechanical testing .

采用断裂韧性的方法并结合电子显微分析技术，研究了Al2O3对烧结矿的低温还原粉化率（RDI）的影响规律。

Fracture toughness method combined with electron microscopy was adopted to investigate the influence of Al 2O 3 on RDI of sinter .

采用X射线衍射分析、透射电子显微分析技术及振动样品磁强计研究了Nd3.6Pr5.4Fe83Co3B5合金熔体在不同淬速下αFe/Nd2Fe14B复合纳米晶结构的形成和磁性。

In this study , the formation and magnetic properties of α - Fe / Nd_2Fe_ ( 14 ) B nanocomposites were studied by using transmission electron microscope , X-ray diffractometer and vibrating sample magnetometer at different quenching speeds .

应用X－射线显微分析技术比较了基本性状相似、但耐盐性显著不同的3组共6个水稻基因型的根内Na＋和Cl－分布情况。

The X ray microanalysis technique was employed to compare Na + and Cl - distribution in the roots of six different rice genotypes which had similar general characters but marked differences in salt tolerance .

通过现场混凝土芯样的力学性能试验和X射线衍射分析（XRD）、扫描电子显微分析（SEM）等微观分析手段，研究了高温高湿腐蚀环境不同深度下的混凝土结构材料的腐蚀机制。

By the micro analysis of the mechanics performance test of concrete core specimen , XRD and SEM , authors studied corrosion mechanism of concrete structure material under the high-temperature high-humidity , corrosiveness surrounding and different deepness .

显微分析研究表明，在Fe3Al中引入TiC颗粒，可以有效地细化材料的显微组织，从而改善材料的热变形加工工艺性能。

Microstructure observations show that the addition of TiC particles can refine the microstructure and is beneficial to the deformation processing .

通过缺陷显微分析、力学性能测试以及计算机模拟对A356铝合金触变成形的样件进行了详细分析。

The thixo-formed A356 alloy parts were investigated by micro-defects analysis , mechanical properties testing and numerical simulation .

MoS2纳米线的制备和显微分析

Preparation and Microscopy Analysis of MoS_2 Nanowires

采用光学显微分析、X射线衍射分析及拉伸试验研究了合金成分对Co-Ni磁性形状记忆合金的显微组织和力学行为的影响。

Optical microscope 、 XRD analysis and tensile test were performed to study the influence of Ni element on the microstructure and mechanical behaviors of the Magneto-shape-memory alloys Co-Ni .

SEM和TEM显微分析表明，玻璃组成对其析晶性能的影响是由于组成改变时，玻璃的分相行为发生变化，玻璃中的分相是析晶的前提条件。

Microstructure analysis of the glass by SEM and TEM showed that the change of the parent glass compositions and the nucleating agents caused different phase separation behavior of the glass , they can influence its crystallization .

本文应用SEM，EPMA、XPS及金相显微分析等技术研究了表面硬化钢和钛合金的烧伤机理。

In this paper , the mechanism of workpiece burn during grinding of casehardened steel and titanium alloys was studied by the use of SEM , EPMA , XPS and the metallograph analysis .

将浸泡于不同温度的质量分数为10%的MgSO4溶液中的含石灰石粉水泥石试样进行X射线衍射分析、扫描电子显微分析、能谱分析和激光Raman光谱分析。

X-ray diffraction , scanning electron microscope , energy dispersive spectrum and laser Raman spectrum analysis were used to identify thaumasite in paste sample stored in 10 % ( in mass ) of MgSO_ ( 4 ) solution at different temperatures .

接着介绍了国内外对人工晶体中掺杂元素分析方法的研究进展，比较了不同分析方法如X射线荧光法、原子光谱法、质谱法、电子探针显微分析法之间的优缺点。

Then we reviewed the progress of researches of methods for determination of doping elements in synthetic crystals . The advantages and disadvantages of the methods of atomic spectroscopy , X ray fluorescence spectrometry , mass spectrometry and electron probe micro-analyzer have been compared .

GH907合金疲劳蠕变和氢脆的显微分析

Microstructure Study on the Fatigue Creep and Hydrogen Embrittlement

[方法]通过金相、SEM和EDAX等先进显微分析技术及化学成份和机械性能检测等方法对封头-进口铁素体不锈钢棒进行检验和分析。

Using Metallographic , SEM , EDAX and other chemical and mechanical methods , imported ferrite stainless steel bars are detected and analyzed . It is found that there are a large number of sulfured manganese inclusions inside the sample bars .

利用显微分析方法研究了其色散光性（即反射率光谱，400～700nm），描述了其特有的单色性；

The optical dispersion of the broken films of light changeable materials was researched by micro analysis , and their mono chromaticity was described by using reflectance spectrum ( 400 ~ 700nm ) .