旋压加工

  • 网络spinning
旋压加工旋压加工
  1. T2铜材回转锥型罩旋压加工工艺的研究

    The Processing Research on Technology of T2 Rotary Awl Cover Spinning

  2. 利用ABAQUS软件的显式积分计算模块,建立了一种简化的旋压加工模拟计算模型。

    With the ABAQUS explicit integral model , a simplified simulating model for the power spinning was presented .

  3. 封头的热旋压加工及应用

    The Hot Spinning of Head Plates ' Forming and Application

  4. 细长薄壁管旋压加工工艺试验研究

    Technological Experimental Study of Spinning Fine Long Thinwalled Tubes

  5. 薄壁回转体零件的旋压加工

    Processing of the Thin - Wall Parts of Revolving Body by Rotary Pressing

  6. 照明器具的剪切旋压加工

    Shear Spinning in Manufacture of Lighting Implement

  7. 钽合金异形件的旋压加工钽件专用离子渗氮设备研制

    Spinning of Specially Shaped Ta Alloy Products Research and Manufacture of Ion-Nitriding Equipment for Tantalum Parts

  8. 运用三维图形技术实现了对旋压加工的动态模拟。

    We realized the dynamic simulation of the spinning process by application of 3D computer graphics technique .

  9. 本文介绍了大型燃油锅炉经拼板焊接和冷旋压加工制造而成的平管板封头残余应力试验。

    This article introduced the experiment of residual stress in flat tubeplate head of large scale fuel boiler that was manufactured by cold rotary extruding and butt weld .

  10. 探讨了铬青铜材料异形件旋压加工时的工艺方案,技术参数的选择,以及该项技术的可行性运用。

    This article discusses its election of the technological program and parameters and the feasible use of the technique when the special part of chrome bronze material is spun .

  11. 介绍了封头热旋压加工的设备、原理、加工方法、特点与不足,并通过实例说明了该加工方法的优点。

    This article introduce hot spinning of head plates ' forming and its equipment 、 principle 、 method of forming 、 characteristics and weakness . And through the example , explained this forming method 's virtue .

  12. 本文根据旋压加工的要求,针对某企业数控旋压机床开发了一套自动编程系统,并就编程系统中涉及的一些关键技术问题进行了深入的研究。

    According to requirement of spinning process , one NC automatic programming system for a NC spinning machine which belongs to a corporation is developed . Some key technical problems of the system are studied in the thesis .

  13. 本文介绍了旋压加工中多自由度的液压位置系统的数字控制原理,以及基于动态建模的控制算法的选择和控制参数的优化。

    This paper presents the principle of a digital controller used in the hydraulic position system of multi freedom in a spinning process and also the selection of a computerized control system based on dynamic modelling as well as the optimization of the control parameters .

  14. 在旋轮的进给运动和坯料的旋转运动共同作用下,使局部的塑性变形逐步地扩展到坯料的全部表面,直到达到要求形状,完成零件的旋压加工。

    Under the combined effect of the feed movement of the roller and the rotary movement of the blank , the local plastic deformation gradually extends to the entire surface of billet until the desired shape is achieved , when the spinning process is completed .

  15. 内螺旋翅片铜管充液旋压成形加工的研究

    Study on the Oil Filled Spinning of Copper Inner Spiral Fin Tubes

  16. 超长圆锥管拉拔&旋压联合成形加工的研究

    Study on Drawing and Stretch Planishing Combined Shaping Process for Manufacturing Overlength Conical Pipes

  17. 详细介绍了全自动立式旋压机床的加工工艺、机床结构、主要技术;

    It is detailed to introduce the processing of craft , construction and main technique of the automatic vertical machine of spinning .

  18. 对内螺纹理片铜管的高速旋压拉伸成形加工机理进行了系统研究,分析了加工过程及参数。

    The mechanism of High speed spin drawing for manufacturing copper inner fin tube is studied systematically , especially the process and parameters of inner fin formation arc analysed .

  19. 滚珠旋压作为一种采用滚珠作为变形工具的强力旋压工艺,成为加工制造高强度、高精度薄壁管的新型工艺,在航空航天工业、汽车工业和民用工业中有着举足轻重的地位。

    As a power spinning process which uses balls as deformation tools , ball-spinning has become the new process for manufacturing high-strength , high-precision thin-walled tube .