收割机

收割机智能CAD中的模糊推理与图形生成

Fuzzy inference and graph produced in intellectual CAD of harvester

在那里，保罗找到了一份工作——在国际收割机公司（InternationalHarvester）做机械师。

where he got a job as a machinist for International Harvester .

联合收割机把庄稼绕田边割了一长条。

The combine had cut a swathe around the edge of the field .

梳脱式联合收割机新型割台的研究设计新一代计算机网络中的IP包头压缩技术分析

Design of the New Stripping Header The Introduction of Header Compression Technology

基于GPS和GIS的联合收割机群实时监测系统

HOMOMORPH-GROUP Combine Harvesters Real Time Monitoring System Based on GPS and GIS

基于GPS的联合收割机智能测产仪器研制

The Development of Low-Cost Yield Monitor System of Combine Harvester Based on GPS

联合收割机脱粒滚筒的PID恒速控制

PID Control of Constant Palstance of a Combine Cylinder

联合收割机收割台CAD系统研制

Research on CAD of combine header

基于ADAMS的联合收割机振动筛虚拟设计

Virtual Design of Vibrating Sieve of Combine Harvester Based on ADAMS

基于ADAMS的小型甘蔗收割机台架机构动态分析

The trends analysis of the small sugarcane harvester gantry device based on ADAMS

谷物联合收割机智能测产系统是基于传感器技术、微处理器技术、GPS技术和系统集成技术的现代农业装备技术。

The grain combine yield monitor system is modern agriculture equipment technique based on the sensor , SCM , GPS technique .

介绍了基于PID控制算法的梳脱式联合收割机梳脱台高度调节自动控制系统。

This paper introduces a height adjustment control system , based on a PID control algorithm , for the stripper header of the 4LS-150 model stripper harvester .

利用RBF网络在线辨识收割机特性参数，以此为基础构成逆模型控制器对收割机进行控制。

The characteristic parameters of combines are identified online by RBF network . An inverse model controller is constituted based on these parameters .

用MATLAB软件对收割机进行振动状态模拟，提高设计的质量和速度，具有重要的理论价值。

The paper has studied vibration or the mower , and MATLAB dynamic simulation , and raised the quality and speed of design , and possessed important theory value .

基于GPS技术、电子技术和先进传感器技术的谷物联合收割机智能测产系统及产量图分布生成技术是精细农业研究的关键技术之一。

It is one of key technology in precision agriculture for the grain yield monitor system and the yield mapping based GPS technology , electro technology and advanced sensing technology .

介绍了一种基于MCS-51系列单片机的联合收割机脱粒滚筒转速自动监控系统的设计。

This paper introduced the Design for an auto-controlling system of threshing-cylinder for combine harvester based on the MCS-51 single-chip microcomputer .

在实例推理中采用ART网络缩小检索范围，以最近邻法计算相似度提取实例，并辅以规则推理完成实例修改，实现了甘蔗收割机智能设计系统的实例推理过程。

The case-based reasoning of sugarcane harvester intelligent design system is implemented by adopting ART network to reduce the search range , introducing nearest neighbor algorithm to calculate similarity and abstract the case , and take rule-based reasoning method to accomplish case modification .

配备测产系统和GPS定位系统的联合收割机是精确农业生产体系中的关键一环，联合收割机提供的产量数据直接反映生产决策的优劣，为下一次更佳的决策提供依据。

The combine equipment with yield measurement system and GPS Orientation system is an important circle of precision agriculture . The yield data from combine directly reflect good and bad of production decision . Afford scientific basis for next decision .

为此，研制了ND-1.2型低割茬茎秆收割机以解决此类问题。

ND-1.2 low stubble haulm reaping machine can solve the problem .

作为小型甘蔗收割机建模与仿真的一部分，着重研究链传动的建模与仿真方法，应用CAD设计软件PRO/E进行链传动机构的建模和装配，介绍了应用阵列功能建立链传动装配模型和利用MSC。

As a part of modeling and simulating of the small-scale sugarcane harvester , this paper focuses on the modeling and simulating method of chain transmission system . It builds the assembly of the chain transmission system with the function of the pattern assembly in PRO / E software .

200Y型联合收割机液压系统的优化设计

Optimizing design on hydraulic pressure system of 200Y combine

本文创造性地借鉴以往收割机的研究成果，采用美国MDI公司开发的ADAMS仿真软件设计了一辆步行式新型旋转链式稻、麦收割机。

This dissertation , a new walking paddy and wheat reaping machine with revolving - chain cutter was designed by using past researching result of the reaping machine for reference and adopting ADAMS software made by American MDI company .

基于ADAMS软件提出了一种对联合收割机振动筛进行虚拟设计的方法，在ADAMS中建立了振动筛运动的仿真模型，并进行了动态仿真分析，考察了筛面加速度及其方向角的变化规律。

A virtual design approach to the vibration sieve of cole combine harvester was put forward based on ADAMS . Realization of process of virtual design were detailed . Model of mechanism of sieve was builded and dynamic simulation and analysis were done with ADAMS .

通过使用带有AFS产量监测系统的联合收割机进行小麦、玉米和大豆收获试验，深入了解了产量监测系统的组成及工作原理，并获得了四个收获季节的产量数据。

Through harvesting winter wheat , corn and soybean using combine harvester equipped with AFS Yield Monitor System , the component of yield monitor system and working principle have been well understood , and four seasons yield data have been acquired .

在阐述甘蔗收割机智能设计系统（SHIDS）的基础上，讨论了其推理机模块中的实例推理。

By expounding the sugarcane harvester intelligent design system ( SHIDS ), this paper discusses the case-based reasoning in the reasoning module of SHIDS .

至今，世界上只有Deutz-Fahr联合收割机上的割刀采用了行星齿轮传动机构，对其研究、设计极少。

So far , planetary gear transmission which only adapted in the Deutz-Fahr combine harvester is rarely involved in the researching and design .

公司生产的CTZ牌轴承产品质量可靠，综合性能稳定，广泛应用在：矿山、冶金、收割机、纺织机械和健身器材等领域。

Our CTZ bearing series have reliable quality , as well as stable performance , and have been widely used in mines , metallurgy , reaper , textile machinery , body building equipments etc.

AZ-30598型制动泵是1000系列联合收割机制动系统的重要组成部分，其工作是否正常，直接影响着收割机的使用性能及行驶安全。

AZ-30598 brake pump is an important part of the 100 Series Combines ' braking system , and its working condition is normal or not will impact the use of harvester performance and driving safety directly .

半喂入联合收割机的脱粒、清选机构试验分析

Testing analysis of threshing and cleaning apparatuses of head feeding combine

油菜收割机脱粒分离装置的试验研究

Experimental Study on Threshing and Separating Unit of Rape Combine Harvester