拉伸试验机

采用扫描电镜、能谱仪及电子拉伸试验机系统地研究了Cu、Ag作为中间层铝基复合材料瞬间液相扩散连接接头的组织与力学性能。

Microstructure and mechanical property of the transient liquid phase bonded aluminium based metal matrix composite joints with Cu , Ag interlayer have be studied by using SEM , XRD and electron tensile testing machine .

采用显微硬度计、电子拉伸试验机、光学显微镜和TEM等，通过与Cu-0.1%Ag合金对比，分析了Cu-0.1%Ag-0.06%Ce合金和Cu-0.1%Ag-0.1%Cr合金的抗软化性能、合金元素的作用及组织形貌特征。

Resistance to softening , the effects of alloy elements and microstructures of Cu-0.1 % Ag-0.06 % Ce and Cu-0.1 % Ag-0.1 % Cr alloys were analyzed and compared with Cu-0.1 % Ag alloy , by using hardometer , electronic tensile testing machine , optical microscope and TEM , etc.

采用环境扫描电镜与万能拉伸试验机分别对HIP后试样微观组织和力学性能进行观察和测试。

Microstructures , mechanical properties of the mentioned alloys were tested respectively via environmental scanning electron microscope , universal testing machine .

用透射电镜、扫描电镜和拉伸试验机研究了时效前的预变形度对8090Al－Li合金拉伸性能的影响。

The effect of predeformation degree on tension property of 8090 Al-Li alloy before aging is studied by using transmission and scanning electron microscopes and tensile machine .

利用Instron万能拉伸试验机测试所得试件的拉伸负荷、0.2%屈服负荷，用扫描电镜分析断裂口性状。

The tensile strength and 0.2 % yield strength were measured on Instron universal testing machine .

采用偏光显微镜（PLM）、差示扫描量热仪（DSC）、毛细管流变仪和拉伸试验机对透明聚丙烯（PP）的结晶形态、热学、流变性、力学性能进行了研究。

In this paper , the crystalline morphology , thermology , rheology and mechanical properties of clarified PP are investigated by PLM , DSC , Rheometer and stretch tester .

论文首先介绍了PDL材料拉伸试验机的工作原理、测试及数据处理系统；

In the beginning , the working principle , testing and data processing system of PDL micro-control material test machine is introduced ;

采用TEM观察、膨胀仪、激光导热综合测试仪以及万能电子拉伸试验机等设备及技术对复合材料进行研究。

The thermo-physical and mechanical properties of Sip / Al composite for electronic packaging application were studied by use of TEM observation , thermal expansion analyzer , laser thermal conduction analyzer and tensile test machine .

使用金相显微镜和扫描电镜观察CLAM钢焊接接头微观组织；使用维氏硬度计、拉伸试验机和冲击试验仪对焊接接头进行硬度及力学性能测试。

Microstructure and carbide distribution of weld joint were observed by metalloscope and SEM . Hardness and mechanical properties were tested respectively in hardness test , tensile test and impact test experiments .

在挂锤式拉伸试验机上对LY12CZ铝合金进行了超塑性试验，研究了其应变速率变化规律。

Super plastic deformation of LY12CZ aluminum alloy was tested on tensile machine with hung hammer and the law of strain rate change was studied .

本文通过带料弯曲拉伸试验机校准确地模拟了08F薄板深冲的摩擦场。

The friction condition of 08F thin sheet in deep drawing is simulated more accurately by means of " Strip Bend-Drawing Tester " .

以PC机为核心，采用NIUSB-6009数据采集卡，设计了模拟量、开关量输出模块，构建了拉伸试验机测控系统的硬件平台。

The hardware platform of stretch test machine of measurement and control system is consisted of PC & the center , NI USB-6009 data acquisition card and analog , digital output module etc.4 .

利用差热分析仪和拉伸试验机，研究了易熔合金Bi-Pb-Sn-Cd的成分对合金熔点和剪切强度的影响。

The melting point and the shear strength of Bi-Pb-Sn-Cd fusible alloys were determined by DSC and tension tester .

采用热模拟试验机、拉伸试验机以及光学显微镜等设备，根据CCT曲线和拉伸实验的结果，研究了冷却速度对700MPa级超级钢组织和性能的影响。

With hot simulator , tensile tester and optical microscope , the influence of cooling rate on the microstructure and mechanical properties of 700 MPa HSLA steels was studied .

用氟离子选择电极测定第7d、第14d、第30d、第60d、第90d及第180d时浸泡液中的氟离子浓度（ppm）。在拉伸试验机上测定哑铃形试样的扯断强度。

An ion - selective electrode connected to an ion analyzer was used to determine the amount of fluoride released at the days of 7,14,30,60,90 and 180.The tensile strength of dumbbell samples were tested in a tensile tester .

研究了两种不同的形状记忆纱线及其机织产品的机械性能，并采用Instron拉伸试验机测试纱线及织物的形状记忆效果。

A study is carried out on the mechanical properties of two different kinds of shape memory yarn and their woven fabric , and the shape memory effect of both the yarn and fabric is tested on Instron tensile test machine .

用拉伸试验机、扫描电镜、透射电镜等研究了Au-Ti（-Y）足金的拉伸性能和断裂行为。

The tensile properties and fracture behaviour of Au-Ti ( - Y ) alloys with a minimum of 99 . 0 mass % Au have been investigated by using tensile tester , SEM and TEM .

拉伸试验机特性对材料试验结果的影响

The Characteristic of Tensile Test Machine Influences on The Test Result

吊装带拉伸试验机计算机控制系统的研究与实现

Research and Implementation on Computer Control System of Sling Stretch Test Machine

拉伸试验机抗拉强度测量结果不确定度的评定

Evaluation on Uncertainty of Tensile Strength Result Tested by Tensile Testing Machine

膜结构双轴拉伸试验机的研制与开发

Preparing and Developing of the Biaxial Tensile Testing Machine of Membrane Structure

采用吊垂式拉伸试验机探讨超塑性变形速度的提高方式

Exploration Enhancing Strain Stress of Superplastic Deformation Using Pendant Hammer Type Tensile Tester

材料拉伸试验机的微机测控系统

The Data Gathering and Control System of Material Stretching Test Machine Based-on Microcomputer

分析了拉伸试验机的组成和检测原理。

The structure and testing theory of the stretch test machine are analyzed .

用拉伸试验机横梁位移值计算断后伸长率

Percentage elongation calculated by crosshead displacement values after fracture

并且用万能电子拉伸试验机和硬度测试仪研究了复合材料的力学性能。

The mechanical properties of composites were studied by tensile testing and hardness testing .

8098单片机在材料拉伸试验机中的应用

Application of Singlechip Microcomputer 8098 in Tensile Test-Machince

拉伸试验机纵向拉伸装置的改进

Improvement on longitudinal tensile fixture of tensile tester

在普通拉伸试验机上实现恒应变速率变形的方法

A Testing Method for Realizing the Constant Strain Rate on a Common Tensile Machine

通过该系统，学生可学习并掌握拉伸试验机的实际操作过程及实验结果的输出。

By using the system , students can learn and master the operating process of the tester and the output of results .