扫描电子显微镜

sǎo miáo diàn zǐ xiǎn wēi jìnɡ
  • scanning electron microscope
扫描电子显微镜扫描电子显微镜
  1. 一项科技新奇迹在英国剑桥大学诞生了——这就是扫描电子显微镜。

    A new technological marvel was invented at Cambridge University in England , the scanning electron microscope .

  2. 扫描电子显微镜能利用x射线谱仪的附件来提供化学组分的信息。

    The scanning electron microscope provides information on chemical composition by use of X-ray spectrometer attachments .

  3. 通过红外光谱分析、X射线衍射分析导电聚苯胺的结构,并通过扫描电子显微镜进行微观形貌分析。

    The configuration of conductive polyaniline was discussed by FTIR and XRD .

  4. 应用金相显微镜、扫描电子显微镜、电子探针、X射线衍射等手段,详细研究了表面冶金层中的组织成分结构特征。

    Making use of optical microscope , SEM , electron probe , X-ray diffraction etc.

  5. 采用扫描电子显微镜(SEM)分析了薄膜的表面形貌,并初步探讨TiN/Si3N4纳米复合超硬薄膜的生长机理。

    Then the growth mechanism of TiN / Si3N4 films was studied .

  6. 扫描电子显微镜(SEM)观察细胞超微结构;

    The ultrastructure was observed by scanning electron microscopy ( SEM ) .

  7. 薄膜的表面形貌由扫描电子显微镜(SEM)测定。

    The surface morphology measurement of the films was performed with SEM .

  8. 扫描电子显微镜(SEM)给人们提供单帧的计算机图像数据。

    Scanning electron microscopy ( SEM ) gives data about a single image .

  9. 扫描电子显微镜(SEM)图表明反应产物分别为花样和树枝状的银纳米结构。

    SEM images indicate the reaction results are flowery and dendritic silver nanostructure .

  10. 利用扫描电子显微镜(SEM)对共混及掺混材料的界面形态进行了观察,并讨论了界面形态与力学性能的关系。

    The relationship between interfacial morphology and mechanical properties of polymer blends is discussed .

  11. 用扫描电子显微镜测定了纳米铝试样的粒径,结果表明Al试样平均粒径为18nm。

    The size of nano Al powders was determined to be 18 nm averagely in diameter by SEM .

  12. 用扫描电子显微镜(SEM)考察了磨痕表面的形貌;

    The surface morphology of wear scar was examined by scanning electron microscope ( SEM ) .

  13. 运用扫描电子显微镜(SEM)对瓦斯突出煤进行了显微结构研究。

    The microstructure of gas-outburst coal was studied by using Scan Electric Microscope ( SEM ) .

  14. 用扫描电子显微镜对无纺布膜的表面形貌进行了分析,并通过X射线衍射仪分析了无纺布膜的结晶情况。

    Scanning Electronic Microscope ( SEM ) was used to analyze the morphology and X-Ray Diffraction for crystallization condition .

  15. 同时,用扫描电子显微镜(SEM)对ZnS:Cu,Au颗粒进行了尺寸和形貌表征。

    Meanwhile , the morphology of ZnS : Cu , Au was analyzed by SEM .

  16. 采用扫描电子显微镜(SEM)对表面多孔性管进行检测,结果显示用新工艺烧结的表面多孔性层质量好、粉末结合度高。

    SEM test results indicate that the sintered porous tubes have high quality and strong bond strength .

  17. 用X射线衍射、扫描电子显微镜、紫外可见吸收光谱仪和X光电子能谱对薄膜进行了表征。

    The films were characterized by X-ray diffraction , scanning electron microscope , UV-visible spectrophotometer , XPS and EDX analysis .

  18. 分别采用X射线衍射(XRD)和扫描电子显微镜(SEM)对样品进行了表征。

    The synthesized zeolites were characterized by X-ray diffraction ( XRD ) and scanning electron microscopy ( SEM ) .

  19. 并用扫描电子显微镜对粗化后的ABS塑料表面和断面进行了观察。

    The coating surface and the sections of ABS plastics are examined by scan electron microscopy .

  20. 方法:利用扫描电子显微镜(SEM)观察COM的生长和聚集。

    Methods : studying growth and aggregation of COM crystals using the scanning electron microscopy ( SEM ) .

  21. 利用化学腐蚀金相显微镜法、扫描电子显微镜(SEM)能谱分析和X射线双晶衍射等方法观测了掺锗硅的原生晶体中缺陷及氧的沉淀的状况。

    Crystal defects are observed by SEM and X-ray double-crystal diffraction , and oxygen content the crystals are measured by FTIR .

  22. 扫描电子显微镜(SEM)下观察内皮细胞同血小板的相互作用。

    The interactions between platelets and endothelial cells were observed with a scanning electron microscopy ( SEM ) . 9 .

  23. 扫描电子显微镜结果表明,PES均匀分散在基体MC尼龙6中。

    SEM photographs showed PES well dispersed in MC nylon 6 matrix .

  24. 采用电弧法制备了C(60)/C(70),并用光学显微镜、扫描电子显微镜和透射电子显微镜对其结晶形貌进行了研究。

    The C60 / C70 , sample was prepared by carbon electric arc method , and its crystal morphology was studied by optical microscopy , SEM and TEM .

  25. 通过扫描电子显微镜、X射线衍射、能谱和腐蚀测量系统对渗层组织进行了分析。

    The structure of permeated layers was analysed through scanning electron microscope , X ray diffraction , energy spectrum and corrosion measuring system .

  26. 利用金相、X射线衍射分析、扫描电子显微镜等手段研究了渗氮层的组织、相组成及其磨损机理。

    The morphologies , phase structures and abrasive mechanism of nitrided layer were investigated with optical microscope , SEM and X-ray diffraction analysis .

  27. 扫描电子显微镜在PS版铝板基砂目形貌观察中的应用

    Application of scanning electron microscope in the observation of grain profile on aluminium substrate of PS plate

  28. 试验完成后,用XRD分析坩埚试样侵蚀层的相组成,用扫描电子显微镜观察坩埚试样侵蚀层的显微结构。

    The phase composition and microstructure of corrosion layer of the attacked specimen was examined by XRD and SEM .

  29. 碳纤维属于脆性材料,用扫描电子显微镜(SEM)可以直接观察到它的表面和内部缺陷。

    Carbon fibre is known as a brittle material . Its surface and inner defects can be directly observed by SEM .

  30. 使用扫描电子显微镜(SEM),研究了两种肝素化方法和肝素加入量对超细纤维形貌的影响。

    Scanning electron microscopy ( SEM ) was used to analyze the effect of heparinization on the morphology of ultrafine fibers .