光学显微镜

guāng xué xiǎn wēi jìng
  • optical microscope;light microscope;photon microscope
光学显微镜光学显微镜
光学显微镜[guāng xué xiǎn wēi jìng]
  1. 采用台盼蓝(trypanblue)活细胞拒染法在普通光学显微镜下观察细胞的存活率;

    Trypan blue was used to observe the viability of thymocytes by general light microscope .

  2. 山茶属Camellia植物花粉形态的光学显微镜观察

    Morphology of pollen grains in Camellia under light microscope

  3. 利用光学显微镜和X射线衍射仪(XRD)等分析测试手段,对焊接接头进行了微观组织分析。

    The microstructure of the seam is investigated by microscope , X-ray and hardness instrument .

  4. 利用光学显微镜观察Au纳米粒子的聚集分形生长过程,用原子力显微镜对分形结构的表面形貌进行表征,讨论了分形生长机理。

    The mechanisms of Au nano-crystalline fractal growth on silicon surface were discussed .

  5. 采用光学显微镜、SEM、IR、DSC和X射线衍射等多种手段对其进行表征。

    It was characterized by optical microscope , SEM , IR , DSC and X-rays diffractometer respectively .

  6. 利用X射线衍射(XRD)分析表面改性层晶相的变化。用光学显微镜观察磨痕宽度。

    X-ray Diffraction ( XRD ) was employed to determine the phases presented in the surface modified layer .

  7. 光学显微镜和Raman散射仪观察了金刚石的表面形貌与晶体结构。

    Optical microscope and Raman spectroscopy were used to investigate the morphology and structure of the boron-doped diamond .

  8. 采用DDS的近场扫描光学显微镜探针-样品的纳米距离检测

    Detection of Nanometer Distance between Sample and Fiber Tip of NSOM with DDS

  9. 采用电弧法制备了C(60)/C(70),并用光学显微镜、扫描电子显微镜和透射电子显微镜对其结晶形貌进行了研究。

    The C60 / C70 , sample was prepared by carbon electric arc method , and its crystal morphology was studied by optical microscopy , SEM and TEM .

  10. 用光学显微镜、扫描电镜、电子探针、光电子能谱和X射线衍射仪对矾土刚玉相组成进行了研究。

    Research on bauxite corundum phase composition has been conducted by means of optical microscope , SEM , EPMA , XPS , XRD .

  11. 采用红外光谱(IR)、元素分析、光学显微镜、扫描电镜(SEM)、差示扫描量热法(DSC)等方法对产物的内部结构、表面结构、微球形态、热稳定性进行了表征。

    The surface structure , morphology of microsphere and heat property were analyzed by IR , SEM , DSC etc.

  12. 通过光学显微镜、SEM等微观分析技术,分析了淬火处理后Fe基与Al2O3颗粒间的复合状况。

    The combined conditions of Fe matrix and Al 2O 3p have been analysed by optical and scanning electron microscopy .

  13. 用光学显微镜和电子显微镜研究了西瓜柱头结构、ATP酶活性和分泌活动。

    Objective : Study the influence on rat brain edema and ATPase activity with cerebral ischemia reperfusion .

  14. 采用光学显微镜和SEM手段观察了凝固组织中非规则共晶的形貌及分布。

    The pattern of anomalous eutectic and its distribution in the solidification microstructures were observed by optical microscope and SEM analysis techniques .

  15. 用光学显微镜、透射电镜和X射线衍射仪进行显微组织观察与物相分析。

    The microstructure of laser-cladded layer was observed using metallurgical microscope and TEM . The phase compositions of laser-cladded layer were analysed using X-ray diffractometer .

  16. 目的探讨光学显微镜尚未表现明显特点的早期肾淀粉样变(amyloidosis,AL)的临床病理特点及诊断方法。

    Objective To investigate the clinicopathological manifestations of early renal amyloidosis ( AL ) and its diagnostic criteria .

  17. 采用SEM、X射线、光学显微镜、显微硬度计等手段研究了高能密度光束表面合金化的机理和工艺。

    In this paper the mechanism and process of light beam surface alloying were investigated by SEM , X-ray diffraction , optical microscope , microhardness etc.

  18. 方法不同浓度的药物作用于培养的肿瘤细胞,应用MTT法和光学显微镜观察药物对细胞的生长抑制作用。

    Methods MTT assay and light-microscope were used to evaluate the inhibitory effect of aloe-emodin on the cancer cells .

  19. 用光学显微镜及透射电镜(TEM)观察复合材料及其基体合金的微观组织,用硬度测试及差示扫描量热仪研究Mullite/ZL101复合材料及其基体合金的时效特性。

    The ageing characteristics of the composite and its matrix alloy were examined by HB and Differential Scanning Calorimeter ( DSC ) .

  20. 用毒素粗提液处理寄主愈伤组织2d后,可于光学显微镜下观察到严重的细胞原生质泡囊化现象,这是寄主受到毒素作用后于细胞水平所表现出的伤害症状。

    After the host callus cells were inoculated with the toxin , the many bubbles in cell plasma were observed in 2 days .

  21. 通过采集有均匀性缺陷的样品,采用X射线荧光光谱仪、X射线能谱仪、浮法玻璃条纹图像分析仪、反射光学显微镜等手段,对试验样品的成分和端面条纹的关系进行了分析。

    The samples were taken from the float glass bars with uniform defects . The relationship of the compositions and side stripes were characterized by XRD , XRF , etc.

  22. 普通光学显微镜及荧光显微镜观察榄香烯哌嗪对HeLa细胞形态的影响,利用流式细胞仪检测HeLa细胞凋亡及细胞周期变化情况。

    Effects of Elemene Piperazine on apoptosis and cell cycle of HeLa cells were evaluated by flow cytometric method .

  23. 同时采用光学显微镜和SEM分别对织造中玻纤断裂情况和树脂在复合材料成型过程中的渗透性进行了研究。

    The optical microscope and SEM were employed to analyze the damage of glass fiber during weaving and resin permeability in the course of molding of composite materials .

  24. 通过将P(NIPA/AMPS)二元凝胶在体视光学显微镜和偏光显微镜进行观察表明,交联剂浓度越大,交联网络越紧密,网格越小。

    P ( NIPA / AMPS ) hydrogels were observed on microscope , which shows that with the increase of the concentration of crosslinking agent , the crosslinking network becomes more compact and the gridding is smaller .

  25. 采用脱Zn腐蚀深度测量方法、恒电位测试方法、光学显微镜和SEM等分析方法,研究了不同的加工工艺对无铅易切削铋黄铜的耐脱Zn腐蚀性能的影响。

    Effects of different processing techniques on corrosion resistance of Pb-free brass have been investigated by dezincification corrosion depth testing , potential tests , optical microscope and SEM .

  26. 将十三种矿物质(氧化物)添加到煤中炭化,用光学显微镜和X射线衍射方法研究矿物质的存在对所得焦炭显微结构的影响。

    The effects of minerals ( oxides ) on coke microstructure are studied by adding 13 types of different oxides into coal to carbonize using optical microscopy and X-ray powder diffraction .

  27. 本文利用时域有限差分(FDTD)法,对聚氯乙烯(PVC)小球在透射式扫描近场光学显微镜(T-SNOM)和光子扫描隧道显微镜(PSTM)两种系统中的光场分布进行数值模拟比较。

    The field intensity distributions of PVC sphere samples by SNOM and PSTM were numerically simulated with the FDTD method .

  28. 用光学显微镜、扫描电镜、电子探针、x射线衍射、透射电镜、显微硬度计等手段分析了合金化区域的成分、组织和性能。

    By means of optical microscope , SEM with EPMA system , X-ray diffraction , TEM and microhardness tester , the compositions , structures and properties of the alloyed zone were determined .

  29. 并通过光学显微镜、扫描电镜、XRD图谱、化学多元素分析及化学物相分析等手段研究了原矿的结构及性质。

    Then the structure and property of raw ore were studied by means of optical microscope , scanning electro-microscope , XRD , multi-elements analysis and chemical phase analysis .

  30. DIA系统借助CCD数码相机和光学显微镜等设备直接进行像内检测,获取显微网点图像的RGB数据信息;

    With CCD digital camera and optical microscope , DIA carries out measurements directly within images and obtain its RGB information ;