成膜物质

通过对成膜物质和不同性能的纳米材料UV-VIS光谱分析测试，发现纳米ZnO和TiO2可有效的屏蔽引起成膜物质老化的紫外线。

By testing the UV-VIS spectrums of the film-forming materials and different nano-materials , nano-sized ZnO and TiO2 were found to effectively shield ultraviolet which can leads to the aging of the film-forming materials .

有机氟涂料性能优异，其主要成膜物质为有机氟树脂与有机氟改性树脂。

Organofluorine resin and organofluorine modified resin are the major film-forming materials for organofluorine coatings which have good properties .

以SBS为主要成膜物质，常温生产防水涂料。

Waterproof coating was produced under normal temperature with SBS as the key film forming material .

本文通过一系列的试验方法，研制出以海藻酸钠为成膜物质、硅藻土作填充材料、选用Ca型固化剂等组成的新型面膜&可剥性粉状面膜。

A new type of face pack-powdered and peel off face pack composed of diatomaceous earth and sodium alginate was prepared based on a series of tests .

采用种子乳液聚合工艺合成纯丙乳液，并以其为成膜物质配制低VOC乳胶涂料。

Acrylate emulsion was synthesized by seeded emulsion polymerization , and it was taken as film forming matter to prepare latex coating with low VOC .

提出了一种以导电金属粒子、有机成膜物质构成的复合导电浆料为熔覆物质，以有机环氧板为绝缘基板，采用CO2激光加热直接制备线路板的新工艺、新方法。

In this paper , a new technology named laser micro-cladding technique is introduced , in which the metal-organic conductive pastes are used as the cladding materials , and the organic insulator resin boards are used as the substrate .

采用成本低而性能好的高氯化聚乙烯（HCPE）作为主要成膜物质，通过二甲苯树脂等改性，研制成功附着力好、防腐性能优异、性价比好的HCPE防腐涂料。

HCPE based anti-corrosive paint with good adhesion , excellent anti-corrosion and cost effectiveness is successfully developed by using HCPE as main film former and toluene resin as modifier .

本课题以片状锌粉为主要填料，以E-44环氧树脂和651聚酰胺固化剂为成膜物质，制备了环氧富锌涂料，并添加氯化稀土对涂料进行改性。

The zinc-rich epoxy coating with flake zinc as the main filler , E-44 epoxy and 651 polyamide curing agent as film former was prepared and modified by doping with rare earth chloride .

本文针对传统硝基漆VOC含量高，固体份低等缺点，研究分析了漆膜成膜物质、溶剂、配方搭配、生产工艺等各种因素对涂料品质和性能的影响，从而作出相应改进。

Compared to the old generation nitrocellulose varnish with hight VOC content and low-solids , the article presents the research about the coating film material , solvent , formulation and product technology which affect the quality and function of the coating .

同时，以该树脂作为成膜物质制备海洋防污涂料，考察了纳米SiO2加入量、树脂加入量、碳纳米管加入量和超声波分散时间对涂料性能的影响。

Moreover , marine antifouling paint was prepared by fluorine-silicon modified acrylic resin as film-forming substance . And effects content of nano-SiO2 , micron dimension pigment , modified acrylic resin , ultrasonic dispersion time , and mass percent of carbon nano-tubes on antifouling coating property were discussed .

结果表明：磷酸是主要成膜物质；

The results show that phosphoric acid is the main film forming substance ;

以最佳配方获得的乳液性能基本达到了乳胶内墙涂料成膜物质的要求。

The performance of the best prescription of emulsion up to par of interior wall coating .

以桐油为主要成膜物质制备新型包膜尿素。

A new kind of encapsulated urea is prepared with tung oil as the main film forming substance .

某种液体橡胶可以作为水性可剥离涂料的成膜物质；一种有机硅可剥离涂料的研制

One kind of water-based protective coatings can be prepared by certain liquid rubber . Developing of Silicone Peelable Coating

本文叙述了非水分散性丙烯酸酯树脂的合成方法，及以此为成膜物质调制道路划线漆的配方和工艺。

The preparation of non-aqueous dispersion resin and manufacture technologY of white non-aqueous dispersion resin trafic paint were investigated .

选用合适组成及相对分子质量的苯乙烯-异戊二烯-苯乙烯三嵌段共聚物作成膜物质，添加某些辅助料，研制了一种热熔型可剥离涂料。

A hot-melt strippable coatings has been preparated by using styrene-isoprene-styrene block tercopolymer as film former and some supplementary materials .

通过对成膜物质、阻燃剂、助剂及成膜过程的试验分析，筛选出最佳工艺配方。

The best formulation was selected by test analysis of film forming materials , fire-retardant , additives and film forming process .

裂解气相色谱/质谱法快速鉴定涂料中的成膜物质

Pyrolysis - gas chromatography / mass spectrometry & A kind of rapid method for the structure identify of the coating binder

加强涂料基料、成膜物质及原理、配套材料和施工技术的研究工作。

Strengthen the research work for base material of painting , film former and its theory , accessory material and construction skill .

这种聚合物乳液能获得性能良好的涂膜，是潜在的新型建筑涂料的成膜物质。

The polymer dispersion can be casted into a film with excellent properties , becoming an attractive binder of new architectural coatings .

为此，研究人员以各种耐高温高性能聚合物作为涂料成膜物质，制备高温耐磨涂层。

So a variety of heat resistant anti-wear coatings using different high temperature performance polymers as the coating film-forming material were developed .

低红外发射涂料是一种重要的红外隐身材料，其性能主要决定于涂料的成膜物质、填料和涂装工艺。

Low infrared emission coating is a species of significant infrared stealth materials and mostly contingent on coating adhesive , stuffings and methodology .

一种吸湿固化可剥离耐腐蚀封存涂料某种液体橡胶可以作为水性可剥离涂料的成膜物质；

PREPARATION OF STRIPPABLE ANTICORROSION COATING BY ABSORBING MOISTURE SOLIDIFICATION One kind of water-based protective coatings can be prepared by certain liquid rubber .

推测其成分可能为糖-蛋白和脂蛋白及中性脂肪的复合体；其功能可能与建成细胞成膜物质有关。

It might be a complex of glyco-protein , lipoprotein and neutral fat with the possible function of formation of molecules for the membrane .

以硅溶胶和丙烯酸乳液为主要成膜物质，配制成有机无机复合型建筑涂料。

Organic and inorganic compound structural coating for wall can be formulated by using binders which consist of silica sol and acrylic acid latex solution .

并在实验室前期研究的基础上，使用小分子硅烷改性树脂作为成膜物质来制备海洋防污涂料。

Moreover , on the basis of pilot study in Lab , prepare marine antifouling paint by using small molecular silane modified resin as film-forming substance .

以聚吡咯为功能成分，环氧树脂为成膜物质，得到一种功能膜，旋涂于金属镁表面，采用极化曲线和开路电位考察了含有聚吡咯的膜层对金属镁的防腐蚀性能。

A film containing the polypyrrole was prepared on magnesium surface , and its anticorrosion property was investigated by potentiodynamic polarization curves and open circuit potential .

本品系氯磺化聚乙烯树脂为主要成膜物质的一种单组份多功能的特种防腐蚀涂料。

This article department chlorine turns to gather the ethylene resin for mainly become a kind of multi-function special kind antisepsis eclipse coating of the film material .

本文应用水玻璃及其与有机成膜物质复配体系作为表面施胶剂，来提高瓦楞原纸的强度。

In this paper , water glass or water glass compound organic film components was employed as the surface sizing agent to improve the strength of corrugated paper .

一般可分为天然成膜物质的使用、涂料工业的形成和合成树脂涂料的生产三个发展阶段。

General can be divided into the use of natural film-forming substances , the formation of the coatings industry and synthetic tree resin coating production of three stages of development .