微孔

用自制的钠—萘处理液，改性聚四氟乙烯（PTFE）微孔膜，改善薄膜表面的润湿性和粘合性。

Using self-prepared sodium naphthaline solution , PTFE micropore membrane was modified to improve its wetness and adhesiveness .

基于BP神经网络的储层微孔隙结构类型预测

Micropore Structure Type Identification Based on BP Neural Network

塑料从微孔压挤出来形成纤维。

Plastic material is extruded through very small holes to form fibres .

P（350）微孔快速色谱柱分离富集铀的性能研究

Studies on Properties of Tiny Decompressed Column Chromatography in Separation and Enrichment of Trace Uranium

糯玉米微孔淀粉的疏水性与反应时间、反应温度、pH、疏水剂用量有关。

Reaction temperature , pH and amount of the hydrophobic agent .

CO2/PS挤出微孔发泡实验研究

The experiment study on Microcellular Foaming of co_2 / PS system in extrusion processing

随着电压的升高，陶瓷膜表面微孔的孔径变大，陶瓷膜内的Ca，P元素含量亦随之升高。

The content of Ca and P element in the coating also increased with the increasing of voltage .

PAN基碳纤维微孔结构表征及对拉伸强度的影响

Pores in PAN-based Carbon Fiber and Its Effect on Tensile Strength

添加剂对γ-Al2O3陶瓷膜微孔结构的影响

Effects of additives on pore-structure of γ - al_2o_3 ceramic membrane

方法细菌染色体DNA经分离纯化并变性后，直接非共价结合于固相微孔板中，与标有光标生物素的DNA探针进行杂交。

Methods : The denatured bacterial chromosome DNA linked to microplate reacted to the probe which was labeled by photobiotin .

沸石微孔材料中Ce（Ⅲ）对Tb（Ⅲ）的敏化发光

Sensitized Luminescence of Tb (ⅲ) with Ce (ⅲ) in Zeolite Microporous Material

动态发泡工艺参数对PS微孔塑料泡孔结构的影响

Effects of dynamic process parameters on cell structure of PS microcellular plastics

PVC微孔塑料的研究进展

Research Progress of Microcellular PVC Foams

TiO2纳微孔膜增敏的压电石英晶体传感器

Improvement of piezoelectric crystal sensor with TiO_2 nano / microporous films

改性BMI微孔轴承保持器材料研究

Study on modified BMI micro-porous material for bearings retainer

UHMWPE微孔隔板结构的测试与分形模型研究

The study of testing and fractal model of UHMWPE separator

PAN基碳纤维及原丝中微孔洞缺陷的一维多取向SAXS表征

Multi-orientated One-dimensional SAXS Study of Microvoids in PAN-based Carbon Fibers and Fibril

发泡橡胶的tanδ峰值随微孔平均面积的增大而增大。

The peak value of tan δ increases with increasing the average area of the microholes .

方法以III型胶原包被微孔板，以HRP-兔抗人vWFIgG为检测抗体，建立vWF：CB；

Methods An assay for vWF : CB was developed using type III collagen and HRP labeled rabbit anti-VWF IgG .

以木浆粕为原料，通过化学及物理方法制备了湿法PU革用微孔剂。

By chemical and physical processes , a wood pulp-based micropore opnt for wet-method polyurethane leather was prepared .

MCS-51单片机控制的自动化微孔钻

MCS-51 Single Chip μ C Controlled Automatic Orifice Drill

微孔挤压技术制备SiCw补强CMAS玻璃陶瓷基复合材料

Preparation of SiC w reinforced CMAS glass_ceramic matrix composite by micro_ hole extrusion technique

这种球形活性炭是以微孔为主的活性炭，其比表面积可达800m2／g，孔容可达0.352cm3／g。

This kind of spherical activated carbon has mainly micropore with surface area of 789 m 2 / g and pore volume of 0.352 cm 3 / g.

TK基因突变试验&琼脂平皿法与微孔平板法的比较

Thymidine kinase gene mutation assay - comparison of microwell method and soft agar method

均相沉淀法涂覆ZnO工艺对微孔Al2O3分离膜改性作用的研究〔I〕&反应温度与涂覆次数的影响

Study on the modification effect of homogeneous precipitation method by ZnO dipping on the al_2o_3 microfiltration membrane influence of reaction temperature and dipping times

Taguchi正交实验技术在微孔注塑中的应用

Application of Taguchi orthogonal experimental technology in the microporous injection molding

方法：微孔滤膜过滤、乙酸乙酯福尔马林分离、Giemsa染色、油镜及相差显微镜观察。

Methods : Micromembrane filtration , ethyl acetate-formalin separation , giemsa stain .

同步辐射SAXS技术在TATB含能材料微孔结构研究中的初步应用

Application of SAXS in determination for microstructure of energetic material TATB

采用一维多取向小角X射线散射研究了聚丙烯腈细流在凝固过程中，凝固浴温度、浓度以及喷丝头拉伸比对初生纤维中微孔结构形态的影响。

The effects of coagulation temperature and concentration and draw down ratio on the microcellular structural morphology of as-spun PAN fiber were studied during coagulation process by small angle X-ray scattering .

SiO2溶胶封孔剂可浸入镁合金微弧氧化膜的微孔，形成有效封孔。

It could be observed that the SiO_2 sol sealing agent fills up the hole of micro-arc oxidation coating on magnesium alloy .