工艺路线

基于三维CAD系统中的零件实体模型和特征结构，研究了三维CAD系统中特征信息的提取，实现了面向工艺路线设计的零件特征模型的构建。

Based on the 3D CAD system , the feature-based model of mechanical part faced to process routing decision is structured .

介绍了在12头纺FDY设备上采用熔体直纺生产56dtex/48f细旦FDY的工艺路线，并从工艺、设备方面探讨了生产细旦FDY的诸多影响因素。

Introducing process routing of 56dtex / 48f fine-denier PET FDY manufacture on 12 ends polymer-melt directly spinning line . The factors affecting development of fine-denier PET FDY were discussed from the aspects of process technology and equipments .

基于杂合遗传算法的工艺路线可变Jobshop调度研究

The Study of Job Shop Scheduling with Alterable Craft Based on Hybrid Genetic Algorithms

基于CAD的工艺路线自动分析

Automatic Analysis of Process Route Using CAD Software

焦炭常压连续气化生产甲醇和CO的工艺路线

Methanol and CO Production Process from Coke with Continuous Gasification in Ambient Pressure

面向多工艺路线的ERP关键技术探讨

The Key Technology of Multi-routing Oriented Enterprise Resource Planning

CAPP系统中工艺路线生成研究

Generation of the Technological Process Route in CAPP

合成橡胶防老剂RD工艺路线的选择

Selection of process for synthesizing antioxidant RD

飞机制造工艺路线分工计划及BOM管理系统研究

Research of manufacturing process route planning and BOM management system ori-ented airplane manufacturing venture

介绍了聚萘二甲酸乙二醇酯（PEN）聚酯的性能和用途，详细概括了合成PEN聚酯的各种工艺路线研究进展情况。

This paper introduces the properties and usage of PEN , and summaries the development of the PEN polyester process .

基于蚁群算法的FMS工艺路线的优化配置

Optimization assignment of the process routes of the FMS based on the ant colony algorithm

重点介绍了IDA法草（双）甘膦生产工艺路线；

The manufacturing technics of glyphoate and PMIDA by IDA route were mainly introduced .

为了便于工艺路线的自动生成，本文采用AHP（层次规划法），一种数学决策模型，进行排序优先级的确定。

This paper proposes the application of Analytic hierarchy process ( AHP ), a mathematical decision modeling tool , for solving complicated decision-making .

LDPE工艺路线评述

Review on Process of LDPE

针对芦荟叶片中果胶和钙盐含量较高等特点，通过比较2种不同的工艺路线，确定了2步沉淀与超滤相结合制备芦荟多糖（AP）的方法。

In order to get rid of pectic substances and calcium from aloe polysaccharide ( AP ), two methods were compared .

研究了制备过程中pH值、钙离子浓度、陈化温度、陈化时间以及后续热处理对复合粉体性能的影响，找到了一个最佳的制备工艺路线。

During preparation , the effect of pH value , calcium concentration , aging temperature , aging time and heat treatment on the property of composite powder was studied systematically .

介绍了加NaOH，空气氧化，硫酸酸化除锰制各铁黑的工艺路线。

A production process that comprises oxidation with NaOH and air , and manganesian removing with sulfuric acid has been described .

TPU生产工艺路线的比较与选择

Comparison and Selection for TPU Production Route

与常规的粉末冶金方法相比，TiC钢结硬质合金通过这种工艺路线可以具有更高的密度和强度。

Compared with conventional P / M method , the route can obtain steel bonded TiC with a higher density and better mechanical properties .

单纱经过捻线工序能改善条干，不同的捻线工艺路线对纱线条干CV值产生不同的影响。

Through twister process , single yarn can improve evenness , and different twister technology route have different influence on yarn evenness CV value .

研究了硫铁矿烧渣与硫酸反应动力学。运用XRD、IR、FTIR、TEM等测试手段，研究了硫铁矿烧渣合成具有不同次级结构的α-.Fe2O3的工艺路线和实验条件。

The techniques and the conditions of α - Fe_2O_3 with different morphologies synthesized from pyrite slag was studied by using XRD , IR , FTIR , TEM .

以高TiO2含量的全消光母粒和普通半消光聚酯切片为原料，通过高速纺丝工艺路线生产56dtex/72f全消光网络丝。

This study uses the normal semidull polyester and high content TiO2 masterbatch to produce 56 dtex / 72 f dull interlaced yarn via high speed spinning .

采用KANBAN进行再造工艺路线，并使员工参与以改进准确率；

Reengineering the technics route by KANBAN and improving the accuracy rate by the participation of company staff ;

针对国内C4抽余液的利用情况，提出了采用聚合法工艺路线建设分离C4馏分装置的必要性。

Considering the situation of utilization on C 4 resource in domestic , a suggestion on establishing polymerization unit was thus proposed .

针对FMS工艺路线优化配置问题提出一种混合遗传算法。

A hybrid genetic algorithm ( HGA ) was proposed for process route optimization of FMS ( Flexible Manufacturing System ) based on closed queueing networks .

采用直接纺工艺路线，对90dtex/144f超细旦涤纶POY的生产工艺进行了研究。

By melt direct spinning , the technology of 90 dtex / 144 f super fine polyester POY was studied .

因此，建立一个所有工艺路线能被有效制订和管理，且随时可供工艺设计人员访问及共享信息的CAPP系统已变得刻不容缓。

It is necessary , therefore , to develop a CAPP system , from which all process routes can be drawn up and managed effectively and process personnel , can easily visit and share information .

通过对橡胶防老剂RD生成反应的基础研究，确定了两步法合成RD的工艺路线，优化了反应条件。

The process in the synthesis of antioxidant RD with two-step procedure was established and the reaction conditions were optimized on the basis of the fundamental research into the formation reaction of RD.

本文主要介绍菜油脚制取RPS型软性白油（皮革加脂剂）的工艺路线及其应用。

This paper mainly described the research result of the process in preparing softening white oil of RPS type ( leather fat-liquoring agent ) .

提出了由环己烯制备1,2-环己二醇的工艺路线，考察了物料配比，反应温度，反应时间，加料方式，PH值等诸多因素的影响。

The method of synthesizing trans-1,2-cyclohexanediol was investigated . The effecting factors on synthesizing 1,2-cyclohexanediol , such as raw material ratio , reaction temperature , reaction time , method of adding raw materials , pH value , and so on , were discussed .