工艺过程

  • 网络process;CAPP
工艺过程工艺过程
  1. 因此,在确定弧焊机器人的生产制造工艺过程时,对于关键零部件的尺寸控制以及车顶的主要定位尺寸的精度进行调整,并且需要重新设计合理的车顶组对焊接夹具。

    Therefore , when determining the production process of robot welding , the adjustment should be done for the dimensions of key components and main location dimensions precision of top , assembly jig and rotation shifter for top assembly need to be designed again .

  2. 介绍了酸洗线的工艺过程以及PLC的控制特点。

    The control characteristics of PLC and technology process of acid pickling are presented .

  3. 调和是润滑油生产工艺过程中必不可少的环节。

    Blending is the very important unit of lube oil manufacture .

  4. 介绍了Fe-Al基金属间化合物粉末的制备工艺过程,并讨论分析了工艺过程对金属间化合物形成的影响。

    The processes for preparing Fe Al intermetallic compounds by solid state reaction were presented .

  5. 介绍了一个基于STEP的集成化工艺过程设计系统,重点对其中的数据交换接口进行了分析和讨论。

    An integrated CAPP system based on STEP is introduced , and the interface for data exchanging is emphatically analyzed and discussed .

  6. V2O5催化甲烷液相部分氧化工艺过程研究

    Study on the Partial Oxidation Process of Methane in Liquid Phase Catalyzed by V_2O_5

  7. 两种PSA制纯氧工艺过程的探讨

    Discussion of Two Types of High Purity Oxygen PSA Cycle

  8. 研究了含双络合剂化学复合镀(Ni-P)-PTFE的工艺过程。

    The technological process of ( Ni P ) PTFE electroless composite plating with two complexing agents has been studied .

  9. 转炉RH连铸工艺过程中低碳铝镇静钢的清洁度

    Cleanliness of Low Carbon Al-Killed Steel during LD-RH-CC Processing

  10. 直接凝固注模成型Si3N4及SiC陶瓷&基本原理及工艺过程

    Moulding of si_3n_4 and SiC ceramics via direct coagulation casting ── basic principles and processing

  11. 剖析了VOD真空处理工艺过程以及工艺过程的合理控制;

    The vacuum treatment steps and process control are analyzed in detail .

  12. 冰激淋生产工艺过程中HACCP系统的应用

    Application of HACCP in the ice cream processing industry

  13. 结果表明,整个工艺过程控制稳定,化学镀Ni-P活塞环可以取代镀Cr环。

    Re sults show that the whole plating process could ha controlled steadily and the Ni-P Chemical plating rings could replace the chromium plating rings .

  14. 分析了染色工艺过程的PID控制算法,提出一种分段改进PID参数的控制方法。

    This paper introduces the PID control over the dyeing process . A step wise control method of improving PID parameters is also stated .

  15. CVI工艺过程中气体传质模型与计算

    Modeling of gas transport and calculation during CVI processing

  16. 第二反应区在MIP工艺过程中所起作用的研究

    Study on the function of the second reaction zone in MIP PROCESS

  17. 探讨了蚕体的冻干工艺过程,绘制出了家蚕的冻干曲线,得到了蚕体冻干的最佳工艺:预冻温度到-20℃,时间为2h。

    Freeze-drying process of silkworm was explored . Freeze-drying curve of silkworm was drawn .

  18. 介绍了核燃料组件中锆管自动TIG焊的工艺过程,设计了PC的接口电路和控制程序。

    Auto - TIG welding process of zirconium tube for nuclear fuel package is introduced . The interface circuit and control program are designed .

  19. 扩散硅压力传感器工艺过程的FMECA分析

    FMECA Analysis of the Technology Process of Diffusion Silicon Pressure Transducer

  20. 介绍了采用不锈钢药芯焊丝CO2气体保护焊焊接不锈钢储罐的工艺过程。

    Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper .

  21. 对盾叶薯蓣水提多糖WEP的提取工艺过程进行了优化。

    The extraction process of WEP from D. zingiberensis were optimized .

  22. 橄榄球的加工采用VBA技术实现了零件工艺过程卡和工序卡的自动生成和输出。

    Creating and output of the working process card and the working procedure card are realized by using VBA technique .

  23. 研究了浇注温度、G镶/G件比例等主要因素对镶铸工艺过程的影响,并对镶铸件的热处理工艺进行了分析。

    The effect of key factors ( pouring temperature , proportion of cast-in insert to casting weight ) on the casting-in process is studied , and the heat treatment of the casting is analyzed .

  24. 这种方法可同时满足工艺过程编制,工时定额制定和NC自动编程对于数据信息的需要,并且可提高信息的准确性和可靠性。

    The method can meet the needs of process planning , machining times sctting and NC automatic programming at the same time . It can advance accuracy and reliability of the informations .

  25. 同时通过对从清洗、轰击、到物料的振动与翻滚等全部工艺过程的论述,说明了金刚石覆镀TiN膜的实施过程。

    We also discuss the whole process from rinsing , bombarding to vibrating and rolling of material and explain the process of putting into effect on covering TiN-plate membrane of diamond .

  26. 激光荧光法测定ADU及AUC化工工艺过程中痕量铀

    The Determination of Trace Uranium in the ADU and AUC Processing by Laser Fluorescence

  27. 详细介绍MIM粘结永磁和烧结磁体的基本工艺过程及基本要求。

    The processing and its requirement on manufacturing bonded permanent magnets and sintered magnets by MIM are discussed in detail .

  28. 根据这一思想构造了面向并行工程的自动工艺过程设计系统(COPP)的基本框架。

    This paper constructs a CE orented CAPP ( COPP ) prototype system .

  29. 研究了以牛奶酪蛋白为原料制备CPPs的工艺过程及条件。

    The technological processes and conditions of preparing casein phosphopeptides ( CPPs ) from casein were studied .

  30. 本文通过SPV法测试不同流程制造的P型抛光硅片中的铁沾污,找到了在P型抛光硅片制造工艺过程中引入铁沾污的主要来源。

    In this work , the iron contamination on the polished silicon wafers fabricated by different procedures has been probed by SPV , and then the dominant iron contamination sources during the fabrication process have been found .