工艺参数

基于Matlab的工艺参数优化设计方法研究

The Research on Technology Parameters Optimize Design Method Based on Matlab

第六章则对T／R集成模块的工艺参数进行设计与分析。

Chapter 6 deals with the technology parameter design and analyzing of T / R module .

焊接工艺参数对镁合金CO2激光焊焊缝表面成形的影响

Effects of welding parameters on CO_ 2 laser welding of magnesium alloys

PLC通过其存贮的工艺参数完成丝光机相应的工作循环。

The PLC completes the corresponding cycle through the stored technique parameters .

碱热法最佳提取工艺参数为：pH值为8.5，提取温度为70℃；

For alkali-heating the optimum separating technics parameter is pH 8.5 , and the separating temperature is 70 ℃;

微波混合加热中SiC预加热体工艺参数对升温特性的影响

Effect of technology parameters for SiC on the temperature-raising characteristics in microwave hybrid heating

着重研究了甲烷浓度、基体温度等工艺参数对热丝CVD法金刚石薄膜显微结构与性能的影响。

The methane concentration and the substrate temperature were studied .

选择适当的激光辐照工艺参数，获得致密的TiN增强金属基复合材料激光改性层。

A compact laser modified surface coating reinforced with fine TiN can be achieved with optimum process parameters .

工艺参数对注塑制品翘曲影响的CAE分析

CAE analysis of the effect of process parameter on Warpage of injection molding part

由于PEG和PS具有不同的玻璃化温度，因此优化的压制工艺参数会有所不同。

The process parameters are different because that PEG and PS have the different glass transition temperature .

制备了TiO2：Ni薄膜，并分析了制备工艺参数对其光催化活性的影响。

TiO_2 : Ni films are also prepared and discussed about its process parameters .

研究了钢包精炼条件下各种工艺参数对VN合金N、V收得率的影响。

The effect of ladle refining parameters on yielding rate of N and V of VN alloy was studied .

合金化填充材料Ti及其它工艺参数对SiCp/6061Al等离子弧焊焊缝组织及性能的影响

Effect of Alloying Filler Titanium and Other Welding Parameters on Microstructure and Mechanical Properties of Welded Joint during PAW of SiCp / 6061Al

NAC系统中钢板控冷工艺参数的研究

Study of controlled cooling technology parameters of steel plate in NAC system

将发酵、氧化中有关pH值的某些规律用于生产工艺参数的控制，提高了微生物氧化收率2～3%。

Some rules governed by pH values were put to use in controlling technical parameters and the result was an increase of 2-3 % of the yield of bio-oxidation .

环合反应温度为195°C，然后在此条件下保温5h是较好的工艺参数；能获得高产率的丁二酰亚胺。

The cyclization reaction temperature was 195 ° C and this temperature was maintained for 5h , the yield of succinimide was good .

用VISUALBASIC6.0和用SqlServer7.0设计了激光切割工艺参数数据查询系统。能实现对常用材料的激光切割工艺参数进行查询。

This designed a inquiry system of laser cutting 's parameters by Visual Basic 6.0 and SQL server 7.0 , we can get the best parameters in this system .

采用扫描电镜（SEM）分析了不同焊接工艺参数下Fe3Al/18-8扩散焊接头的显微组织特征。

The microstructure feature in the diffusion - welded joint of Fe3Al / 18 - 8 was observed by means of scanning electron microscope ( SEM ) .

激光熔覆工艺参数对TiCp/Al表层复合材料的影响

Influence of technological parameters on interface bonding and structure uniformity of in-situ synthesis TiC_p / Al composites in laser cladding process

基于净干伸长的MAG焊接数学模型与工艺参数控制

Mathematics Model and Process Parameters Control Based On the Genuine Length of Wire in MAG

溅射工艺参数对Ba（0.5）Sr（0.5）TiO3薄膜沉积速率和介电性能的影响

Effect of sputtering process on deposition rate and dielectrical properties of Ba_ ( 0.5 ) Sr_ ( 0.5 ) TiO_3 thin films

通过现场调研和工艺参数统计，分析Mn/S、S、P、拉速和连铸二冷设备等对异型坯腹板中心裂纹的影响，在此基础上提出改进建议。

This paper analyzes the effects of Mn / S , S and P contents , casting speed and secondary cooling on centreline crack in the web of beam blank , and puts forward the improving measure .

工艺参数对Sol&Gel法制备的PLZT铁电薄膜结构和性能的影响

The processing effects on structure and properties of sol-gel derived PLZT Ferroelectric Thin Films

焊接工艺参数对A-TIG焊的焊缝成形影响

EfFect of welding parameter on weld form in A - TIG welding

然后在（100）LNO薄膜电极上生长PZT铁电薄膜，通过合适溅射工艺参数的选择，成功地制备了高度（100）取向的PZT铁电薄膜。

Also , PZT ferroelectric thin films deposited on ( 100 ) LNO electrode are highly ( 100 ) orientation .

对溅射源I－V特性作了计算，为理论分析溅射源I－V特性提供了可能：并根据计算和实验结果，给出了溅射源最佳工艺参数。

This research makes it possible to analyse I-V characteristics in Cylindrical Magnetron Sputtering Source . According to the both of calculating and experimental results the optimum process parameters of the source are given .

并进一步利用MATLAB优化工具包建立了优化模型，获得了一定熔宽条件下，得到最大熔深的工艺参数。

Subsequently , with the MATLAB optimization toolbox , an optimized model was created and the best value of every parameter could be calculated to obtain the biggest penetration depth when the penetration width is fixed .

确定了合成过程的最佳工艺参数：配碳量（C和SiO2的摩尔比）为5，反应温度为1480℃，恒温时间为8h。

The optimum parameters of the synthesis process are : the molar ratio of C and SiO_2 , 5 , reaction temperature , 1 480 ℃, holding time , 8 h.

采用磁化絮凝高梯度磁分离方法处理城市污水，研究了磁种用量、磁场强度、混凝剂用量、污水pH值和流速等工艺参数对除磷效果的影响。

Urban sewage is treated by magnetic flocculation and high gradient magnetic separation . The technical parameters such as magnetic feed dosage , magnetic field intensity , coagulating agent dosage , pH value and flow velocity are investigated .

研究了奥氏体不锈钢A-TIG焊和普通TIG焊在焊接工艺参数不同时对其焊缝成形的影响。

The effect of welding parameter on weld form in A - TIG and conventional TIG welding of austenitic stainless steel is studied .