大线

本文主要从系统控制单元测试、大线管理器测试和采集站测试器三部分详细地介绍了Vision系统的故障检测功能。

This paper introduces its troubleshooting function in detail from its System Manage Unit ( SMU ) testing , Cable Manage Unit ( CMU ) testing and Line Acquisition Module ( LAM ) testing .

一种用电容法测大线断点的方法

A method for using capacitance method to locate breakdown point of cable

试验数据表明，生产大线能量焊接用钢以保持较高的Ti、N含量为佳。

It is concluded that the more contents of Ti and N should be kept so as to produce welding steel with high energy input .

Nb对大线能量焊接高强度低合金钢热影响区组织和性能的研究

Study of Nb on Microstructures and Properties of Heat-Affected Zones in HSLA Steel with Large Heat Input Welding

100kJ/cm大线能量焊接热模拟热影响区（HAZ）具有良好的低温韧性。

The simulated heat affected zone ( HAZ ) of 100kJ / cm high heat input welding possessed good toughness in low temperature .

Nb-Ti微合金钢大线能量焊接热影响区组织和韧性的研究

Study on Structure and Toughness in heat affected zone of Nb-Ti Microalloyed Steel after Welding with High Heat Input

试验结果表明，JB800钢具有可用大线能量焊接的特点。

The experimental results prove that the steel JB800 can be welded with the high heating input .

600MPa级大线能量焊接用钢综合性能研究

Research on the properties of 600 MPa grade high heat input welding steel

研制了一种大线能量低焊接裂纹敏感性压力容器用钢，研究了其力学性能、微观组织结构和焊接粗晶热影响区（CGHAZ）的微观组织结构特征及力学性能。

A new low alloying steel with low susceptibility to weld cold cracking has been developed for large heat input welding in pressure vessel engineering .

大线能量焊接用结构钢的研究进展

Progress in Research of Structural Steels for Large Heat Input Welding

铸铁缺陷的大线能量补焊

Cast iron defects repaired by welding with large line energy

改善大线能量焊接韧性的冶炼技术研究

Metallurgical Technology Study on Improving Large Heat Input Welding Toughness

大线能量埋弧焊凝固裂纹的产生及预防

Production and Prevention of Solidification Crack in Large-heat-input Submerged-arc Welding

建筑用大线能量焊接高强度厚钢板的开发

Development of High Heat Input Welded High Strength Heavy Plate for Building

碱土金属微合金化大线能量焊接低合金高强钢的研究

Research on High Heat Input Welding Alkaline Metals Micro-alloyed High Strength Low-alloyed Steels

首钢低裂纹敏感性大线能量焊接钢板的焊接性能

Welding Capacity of Shougang Plate with Low Crack Free for High Energy Input Welding

首次开发了大线能量焊接船板钢的关键冶金工艺技术。

Key metallurgical technology of high heat input welding ship steel were empoldered firstly .

因此开发大型储罐用大线能量焊接用钢的许多工艺技术尚待开发研究。

Therefore many technologies of large-scale input energy storage tank steels needed to research and developed .

大线能量低焊接裂纹敏感性压力容器用钢的性能

Development of Large Heat Input Welding Steel with Low Susceptibility to Weld Cold Cracking for Pressure Vessels

大线能量焊接用钢热影响区组织和性能的研究进展

Progress in Research on Structure and Properties of Heat Affected Zone of Steel for High Heat Input Welding

介绍储罐用大线能量用钢开发的技术要求与途径。

The technical requirements and technical methods of high input energy welding steel plate for oil storage was described .

热轧低屈强比大线能量焊接建筑钢力学性能与组织研究

Research on the mechanical properties and microstructures of hot-rolled low yield ratio and high heat input welding construction steel

在粗化阶段的最粗层，针对大线网布线，专门提出了一个满足时延约束的多线网布线算法。

In coarsest level , a special multi nets routing algorithm considering timing constraint is proposed for global nets .

大线沟金矿床位于吉林省夹皮沟&大砬子北西向构造带中段北盘，金矿成矿作用与区域构造演化关系密切；

The Daxiangou gold deposit is located in the northern part of the center of the Jiapigou-Dalazi NW tectonic belt ;

具有低的焊接冷裂纹敏感性，能承受大线能量（50～100kJ/cm）焊接；

The steel has low cold-cracking sensitivity and can bear high heat input ( 50 ~ 100kJ / cm ) .

文中介绍了大线破损、漏电、插针镀层脱落及被牲畜啃咬的修复方法。

The paper offered the reparation methods for damaged cable , leakage of electricity , stripping of film and bite by animal .

大线能量焊接钢板具有广阔的市场前景，已成为厚板的发展趋势。

There is a increasing market demand for the large heat input welding steel plates , which become the developing trend of heavy plates .

电容法测大线断点位置是一种早期用来测试模拟电缆断点的常用方法，用它测试数字电缆也同样有效。

Using capacitance method to locate the breakdown position of cable is common method that measured breakdown point of analog cable before , which can also be effective to locate digital cable .

我们不穿校服运动服只穿“白大线”染青染蓝的衣衫，很羡慕公社书记身上的涤卡布中山服。

We do not wear uniforms sportswear wearing " big white line " blue dye green dye clothes , it is the envy of the commune secretary of the body wash cabo Zhongshan Fu .

上袖之前先用粗针大线将其缀上定位。如果需要更多位的话，把前缀和区号放在上面的前缀箱里。

The sleeve should be tacked on to the shirt to hold it in place before you sew it properly . If you need more , put the prefix and area codes in the prefix box above .