场发射扫描电子显微镜

通过X射线衍射、透射电子显微镜、场发射扫描电子显微镜、能量色散谱以及氮吸附-脱附等温线对纳米微粒进行表征。

This novel nanostructure was characterized by XRD , TEM , FESEM , EDS and nitrogen adsorption-desorption isotherms .

并利用场发射扫描电子显微镜对试样的冲击断面进行了微观结构分析，发现纳米Al2O3经乳液聚合改性后在基体中分散良好，起到很好的增强增韧作用。

The FE-SEM micrograph analysis results showed that the nano-Al_2O_3 modified by emulsion polymerization dispersed well in matrix , and it served the function of toughening and strengthening .

薄膜的微结构、表面形貌和光学性质等分别采用X射线衍射、场发射扫描电子显微镜、原子力显微镜和紫外可见近红外分光光度计等观察和测量。

The microstructure , morphology and optical properties of the films were investigated by X-ray diffraction , field-emission scanning electron microscope and optical transmittance .

使用扫描电子显微镜、场发射扫描电子显微镜、X射线衍射、X射线光电子能谱对样品的结构和形貌进行了表征。

SEM , Field-emission scanning electron microscope ( FESEM ), XRD , and X-ray photoelectron spectroscopy ( XPS ) have been utilized to characterize the samples .

LEOSUPRA系列热场发射扫描电子显微镜

LEO SUPRA series of field emission scanning electron microscopes

采用X射线衍射仪、透射电子显微镜/X射线能谱、场发射扫描电子显微镜等研究了釉的显微结构及分相与析晶的形成机理。

The microstructure of the glazes and their formation mechanism of phase-separation and crystallization were studied by X-ray diffraction , transmission electron microscopy / energy dispersive spectrometry and field emission-scanning electron microscopy .

通过场发射扫描电子显微镜（SEM）表征了纳米管阵列表面的网状结构和纳米管的孔径等。

The structural characterization including the network like structure surface of the nanotube arrays and the diameter of the nanotubes was carried out by field emission scanning electron microscopy ( SEM ) .

分别采用场发射扫描电子显微镜和小掠射角X射线衍射方法研究了涂层横截面的形貌和晶体结构，并对涂层的纳米硬度和摩擦性能进行了表征。

The cross-section morphology and microstructure of the coatings were studied by field emission scanning electron microscopy and glancing angle X-ray diffraction respectively , and the nano-hardness and friction behavior of the coatings were also characterized .

我们利用场发射扫描电子显微镜（FESEM）对所有样品进行了优化和表征。

We used field emission scanning electron microscope ( FESEM ) to all samples optimized and characterized .

并采用场发射扫描电子显微镜、X射线衍射、X射线光电子谱对其表面形貌结构、物相结构、成分进行了表征。

The morphology , crystalline structure , and composition of the as-grown specimens were characterized by using of field-emission scanning electron microscopy ( FE-SEM ), X-ray diffraction ( XRD ) and X-ray photoelectron spectroscopy ( XPS ), respectively .

场发射扫描电子显微镜（FESEM）是一种高分辨扫描电镜，在材料分析中得到广泛应用。

Field emission scanning electron microscope ( FESEM ) is a kind of high resolution scanning electron microscope .

应用X射线衍射仪（XRD）、场发射扫描电子显微镜（FESEM）、傅立叶变换红外光谱（FTIR）和紫外-可见光谱（UV-vis）等方法对产物进行了表征。

The as-prepared products were characterized by X-ray powder diffraction ( XRD ), ultraviolet – visible spectrum , field-emission scanning electron microscopy ( FESEM ) and Fourier transform infrared spectroscopy ( FT-IR ) .

用X射线衍射仪（XRD）、场发射扫描电子显微镜（FE-SEM）、透射电子显微镜（TEM）对样品的结构、形貌、进行表征和观测。

The structure , morphologies of the as-obtained samples have been characterized by X-ray diffraction ( XRD ), field emission scanning electron microscopy ( FE-SEM ), and transmission electron microscopy ( TEM ) .

用GS-1B型六面顶压机研究了ZnO纳米晶高压下的晶粒演化和性能，用X射线衍射仪和场发射扫描电子显微镜对高压样品的晶粒尺寸、微观形貌进行了表征。

Grain fragmentation and property modification of nanocrystalline ZnO under high pressure were studied on CS-1B 6 × 8000 kN cubic high pressure apparatus . Grain size and microstructure of the samples have been characterized by X-ray diffraction and field emission scanning electron microscopy .

采用场发射扫描电子显微镜（FE-SEM），X-射线能量散射谱（EDS）对其分别进行形貌表征和成分分析。

Field emission scanning electron microscopy ( FE-SEM ), energy-dispersive X-ray spectroscopy ( EDS ) were employed to characterize the morphology and analyse the element composition of the film .

利用场发射扫描电子显微镜、X射线衍射仪以及X射线能谱仪等试验方法对同轴送氧CO2连续激光制备的ZnO纳米晶体的形貌、组成成分以及相结构进行了分析。

The different ZnO nanocrystals were fabricated with zinc sheet ( purity 99.99 % ) by CO_2 laser irradiation . The morphologies , components and phase structures of ZnO products were investigated by field-emission scanning electron microscopy , X-ray diffraction , and energy dispersed X-ray spectrometer .

应用场发射扫描电子显微镜和X射线能谱仪，研究了2005年4月北京市区2次典型沙尘天气PM10样品中矿物单颗粒的形貌、数量-粒度分布和化学组成。

Field emission scanning electron microscopy ( FESEM ) and energy dispersive X-ray spectrometry ( EDX ) were used to obtain the morphology , number-size distribution and chemical compositions of individual mineral particles collected during the two dust storm episodes in April 2005 in Beijing .

使用电化学工作站测试了线性扫描阳极极化曲线及阳极氧化过程中的电流密度-时间（I-t）曲线；并使用场发射扫描电子显微镜（FE-SEM）对TiO2纳米管阵列进行微观形貌观察。

The linear sweep anodic polarization curve and current density-time ( I-t ) curves were gained by means of electrochemical workstation . The morphology of TiO2 nanotube arrays was observed with the aid of field emission scanning electron microscope ( FE-SEM ) .

场发射扫描电子显微镜观察分析涂层的形貌。

The surface morphology was observed by field scanning electron microscopy .

分别使用场发射扫描电子显微镜，原子力显微镜和拉曼光谱仪等对生长的定向单壁碳纳米管阵列样品进行表征。

Field Emission Scanning Electron Microscopy , Atomic Force Microscopy and Raman spectrum were applied to characterize the carbon nanotubes ' structure respectively .

以硫酸为电解液研究了多孔阳极氧化铝膜的制备，并采用场发射扫描电子显微镜对多孔氧化铝膜的形貌进行表征。

The preparation of porous anodic alumina film is studied with sulfuric acid as electrolyte and the morphology of the film is characterized by field-emission scanning electron microscope ( FE-SEM ) .