固体废弃物

基于GIS的小城镇固体废弃物管理信息系统研究

Research of the Small Town Solid Waste Management Information System Based on GIS

工业固体废弃物作为合成Si基陶瓷原料的开发与利用

Utilization and Exploitation of Si-Based Ceramic Materials Synthesized from Industrial Solid Waste

运用因次分析、相似准则和BP神经网络理论建立了固体废弃物热解的参数群预测模型。

The parameter group anticipating model of waste pyrolysis was established .

固体废弃物的酸碱度与浸提剂pH值的相关性研究

A Study about the Interrelation between the pH Values of Solid Wastes and Extracting Solvents

工业固体废弃物产生量的灰色GM（1,1）预测

The Grey GM ( 1,1 ) Forecast for the Products of Industrial Solid Waste Material

城市固体废弃物（MSW）抗剪强度特性研究

Shear strength characteristics of municipal solid waste

填埋是处理城市固体废弃物（MSW）的主要方法。

Landfilling is the most important controlled method for municipal solid waste ( MSW ) disposal .

在固体废弃物资源化中引入生命周期评价（LCA）方法

Introduce the Method of LCA in Solid Waste Resource Recovery

利用由聚酯生产中的固体废弃物TA残渣提取的对苯二甲酸和间苯二甲酸的混合二元酸与异辛醇反应制取混合型增塑剂。

A mixed plasticizer was produced with mixed benzo-dicarboxylic acids extracted from TA residue as material to react with 2-ethylhexanol .

对几种煤和城市固体废弃物（MSW）如PVC和纤维素中的主要可燃成分进行了实验研究。

Several kinds of coals and the major combustible components in MSW , such as PVC and cellulose were tested in this paper .

兰州市人均GDP与工业固体废弃物之间存在着线性曲线的关系，从1986年起兰州市工业固体废弃物就随着人均GDP的增加而减少的。

Per capita GDP and industrial solid wastes in Lanzhou exist linear curve relationship , since 1986 , industrial solid wastes are reduced as per capita GDP decreased .

对于不同降解度的城市固体废弃物，分别利用改进后的适合MSW的残余变形模型对模型参数进行整理，比较了固结比、降解度、动应力等各种因素对残余变形参数的影响。

Compared the consolidation ratio , degradation degree , the dynamic stress and other factors on the influence in residual deformation parameters .

固体废弃物（MSW）填埋方式的合理选择、填埋设施的综合利用，对填埋场的持续建设与发展有着重要的意义。

It is very important for sustainable construction and development of landfill sites to reasonably select solid waste landfill method and comprehensively use landfill facility .

本文以MacromediaAuthorware5.0为开发工具，开发了《固体废弃物处理与处置》多媒体CAI课件。

In this paper , based on Macromedia Authorware 5.0 , the multimedia CAI courseware of Treatment and Disposal of Solid Waste was developed .

为了促进资源的循环利用和可持续经济的发展，在固体废弃物资源化中引入LCA方法显得非常必要。

For promoting the resources ' circulation and sustainable development of economy , it is necessary to introduce the method in solid waste resource recovery .

固体废弃物（MSW）即城市垃圾，是指在城市日常生活中或者为城市日常生活提供服务的活动中产生的固体废物以及法律、行政法规规定视为城市生活垃圾的固体废物。

Municipal solid waste ( MSW ) or named municipal waste is defined the one produced in urban everyday life and services provided , and ruled by laws and administrative laws and regulations .

通过室内蠕变-降解对比试验，研究了城市固体废弃物（MSW）的长期变形过程，详细地分析了MSW应变、沉降速率以及孔隙比随时间的变化规律。

Based on the experimental results , characteristics of strain changing , void ratio changing , settlement rate changing against time , and the relationship between stress and strain of MSW were studied .

PHA具有生物相容性和可生物降解性，同时根据单体组分的不同还可以具有同石化塑料相类似的多种物理性质，可以代替现行的难降解塑料，以此可缓解环境固体废弃物污染。

PHAs are biocompatible and biodegradable and can also possess the similar properties with the petro made plastics , which enables them to substitute the current plastics to reduce solid wastes .

废气排放主要是CO2和SOx，其主要来源于煤的燃烧和工艺过程，十分巨大的工业固体废弃物将造成严峻的局地环境问题。

The key gas emission is CO 2 and SO x , which are mainly emitted from coal burning and industrial process . The huge industrial solid waste from steel production will lead to severe local environmental pressure .

城市固体废弃物（MSW）的沉降问题是卫生填埋法处理城市垃圾中的重点问题之一，现场监测和室内试验是建立合理计算模型的首要前提。

One of the most important problems for dealing with municipal solid wastes ( MSW ) in sanitary landfills is the settlement characteristics of MSW , and the laboratory and field tests are the prerequisite to reasonable settlement building .

填埋场是采用卫生填埋法对城市固体废弃物（MSW）进行处置的场地，填埋场沉降对填埋场容量、自身稳定以及对周围环境影响是填埋场设计和施工十分关心的问题。

Landfill is the place to disposal the municipal solid waste ( MSW ) . During the design and construction , special attention was paid to the landfill settlement which affected on the capacity , stability , and the surrounding .

废旧线路板（WPCB）是目前废弃量大、可资源化利用率高的城市固体废弃物。

Waste printed circuit board ( WPCB ) was now a large amount , but high recycling utilization rate of the municipal solid waste .

本文以沈阳市航空遥感图像解译出的固体废弃物堆放及具周围环境信息为基础数据，在IBMPc/XT微机上建立了固废遥感微机信息系统（MSWRSIS）。

A Microcomputer Solid Waste Remote Sensing Information System ( MSWRSIS ) was set up in microcomputer ( IBM PC / XT ) by using image data of aerial remote sensing in Shenyang area .

根据参加2003日本神户国际动力工程会议的情况，着重评述了化石燃料低NOX燃烧、固体废弃物焚烧、煤及固体废弃物气化等技术领域的最新研究进展。

According to proceedings of the International Conference on Power Engineering , held in Kobe , Japan , in 2003 , recent technical progress in low NO_x combustion , incineration of solid wastes , gasification of coal and solid wastes are being reviewed in the main .

为了完善企业资源计划（ERP）系统中可用于产品生命周期评价（LCA）的数据，如材料、产品、工艺流程、运输和固体废弃物等，提出了一种支持LCA的ERP系统框架。

To perfect the data available for product life cycle assessment ( LCA ) in the current enterprise resources planning ( ERP ) systems , such as materials , products , technical process , transportation and solid waste , the framework of an ERP system supporting LCA was proposed .

综合利用城市固体废弃物促进循环经济发展

Synthetic Utilization of Municipal Solid Waste and Promoting Circulation Economy Development

硫铁矿烧渣是硫酸工业的固体废弃物，硫铁矿烧渣的综合利用既能消除烧渣对环境的危害，又作为资源进行了利用。

Pyrite cinders are the solid waste of sulfuric acid industry .

固体废弃物热解产物的参数群神经网络预测模型

Parameter group of neural network anticipating model of solid waste pyrolysis

探地雷达应用于城市固体废弃物填埋场的构想

Conception of ground penetrating radar applied in municipal solid waste landfills

固体废弃物利用率达到90%以上。

The utilization rate of solid waste is over 90 % .