台车

基于ANSYS的隧道衬砌台车龙门架螺栓副设计

Design of Based on ANSYS Tunnel Lining Trolley Gantry Frame Bolt

基于Ansysworkbench的钢模台车优化设计

Steel Mold Trolley Structure Optimizing Based On ANSYS Workbench

ST型土壤槽测试台车车架有限单元法计算

Calculations concerning the frame structure of the ST-Type soil trough testing machine by finite element method

Solidworks在衬砌台车设计中的应用

The application of Solidworks in design of tunnel lining trolley

为降低一台车用增压涡流室柴油机的NOx排放，设计加工了EGR系统。

An EGR system is designed and machined for reducing NO_x emission of vehicle turbocharged swirl-chamber diesel engine .

Jeep在2013年一共卖出了103397台车，其中有80432辆都是切诺基。

Jeep sold 103,397 more vehicles than in 2013 , 80,432 of them Cherokees .

最后使用PID控制器对台车速度控制系统进行了校正，改善了系统的性能。

At last , PID controller is used to rectify the speed controlling system of the car . As a result , the characteristic of the system is improved .

我是婴儿潮早期出生的那一代人。像许多同龄人一样，我的第一台车是一台大众甲壳虫（VolkswagenBeetle）。

Like many members of my early baby boom generation , my first car was a Volkswagen Beetle .

SIMBA型采矿台车工作压力下降分析

Analysis of the working pressure decrease with SIMBA mining trolley

150t转炉本体设备台车法安装技术

Technology of Installation 150t Converter Equipment with Car-Type Method

可以作为利用Visualc++的OpenGL实现三维运动仿真的参考，也可以作为一种对立体式仓储式台车的自导航的控制方法。

The paper can be a reference to the study of applying Visual C + + platform to realize OpenGL 3D moving emulation , also a contribution to the study of loaded trolleys ' self-navigation .

4.8m×13m台车加热炉技术改造

4.8 m × 13 m Technique Improvement of Car-type Heating Furnace

针对土槽试验台车进行土槽试验，设计了以CZ－200型磁粉制动器作为加载装置的计算机模拟加载系统。

Using a CZ-200 magnetic particle brake ( MPB ), a simulation loading system was designed for carrying out tests with a soil bin tester .

针对无轨化台车货架的结构和移动方式，对基于OpenGL的自导航台车三维运动仿真及其直行控制算法进行了研究；

According to the structure and moving way of the trackless trolley , both the 3D Kinematics emulation of self-navigating trolley based on OpenGL and the straight movement control algorithm , are researched .

结合X车型安全气囊开发过程中的台车试验（48kph）和实车碰撞试验（48kph），对台车模拟试验中的这种波形差异问题进行了分析，并提出了具体的解决方案。

The waveform problem during bled simulating test was analyzed by combining with the bled test ( 48 kph ) and the vehicle test ( 48 kph ) matched with airbag test . the concrete solutions to the above problem were proposed .

TYT型组合式救援台车结构强度试验研究

Test research on structural strength of TYT combination rescue trolley

MZC-4自带轨行门架式液压凿岩台车

Gantry type hydraulic drill rig with on-board rails Model MZC-4

H-128凿岩台车大修改造方案分析

Analysis to General Repair and Reconstruction Scheme of H-128 Rock Drilling Rig

为满足大型钢结构件退火的需要，研制开发了大型THL台车式退火炉。

In order to meet the needs of the heat treatment technique for large steel structure , THL large type trolley annealing furnace has been developed successfully .

在地质条件复杂台车不能充分利用的情况下，取得了台班效率50m、平均凿岩速度1.8m／min的成绩。

Under the conditions of both complicated geology and jumbo not to be full uses , 50m / jumbo-shift and 1 . 8 m / min ( average rilling footage ) were reached .

新研制的SLA型梭式轨用拖车机，对被牵移车箱的施力方式是夹持运行台车，拖车能力较现有同类拖车机有大幅度提高。

The newly developed SLA shuttling rail mounted tractor is different from other products in that it hold the bogie part of a trailer to make the whole trailer train move , resulting in great increase in its capacity .

TMR-13.85燃煤台车式热处理炉的设计与应用

Design and Application of TMR-13.85 Coal fired Bogie Hearth Type Heat treatment Furnace

30MN快锻机组台车式加热炉综合性节能技术改造

The Comprehensive Energy Saving Technical Upgrading for the Bogie Type Furnace of 30 MN Quick Forging Press Unit

本文介绍了大型台车式电阻炉RT-1400的结构及设计计算。

This article introduces the structure and designing calculation of RT-1400 big bogie hearth resistance furnace .

广州珠江隧道的33×7.9m管节，采用整体移动式钢模台车，在干坞中预制。

The 33 × 7.9m tube used in Guangzhou Pearl River Tunnel is prefabricated by movable moulding bed in dry dock site .

以SYT-18型凿岩台车为控制对象，利用MCS-51系列的8031单片机对其进行控制，这对凿岩台车的机电一体化，进而实现凿岩自动化方面是一次有益的尝试。

The MCS 51 Series 8031 single chip computer is used to perform the control of SYT 18 jumbo , which is a useful attempt in making the mechanics and electronics into one body and further realizing the automation of drilling operation .

AX-100L大板定厚机采用龙门式连体结构，台车丝杆驱动自动走刀，并采用美国爱默生变频器可进行无极高速。

AX-100L Slab Thickness Machine is adopted gantry linkage structure , autofeed driven by trolly screw mandrel and America EMERSON transducer to adjust the speed steplessly .

主要介绍了凿岩台车DCS12液压系统发热、欠压的主要原因及诊断、处理的办法。

The paper mainly introduces hydraulic system of DCS12 rock drilling rig about main cause of heating and low voltage and means of diagnosis and treatment .

文中介绍了我国自行研制的MZC-4型自带轨行门架式液压凿岩台车的主要结构、性能参数和液压传动等设计上的特点。

This article describes the design features in the main structure , performance parameters , and hydraulic system of gantry type hydraulic drill rig with on-board rails Model MZC-4 .

论述了台车式加热炉技术改造的思路、方案以及采用的HTAC高温空气燃烧等技术，并介绍了该炉改造后的使用情况及取得的效益。

This paper has described the concept , scheme for the technical upgrading of the bogie type furnace with the method of HTAC high temperature air combustion . Meanwhile the work condition of this furnace after its upgraded and the achieved benefits are presented in this article as well .