变位齿轮

  • 网络modified gear;profile shift gear;profile shifted gear;gear with addendum modification
变位齿轮变位齿轮
  1. 基于SolidWorks的齿轮泵用渐开线变位齿轮实体建模

    Solid Modeling of Involutes Modified Gear Used for Gear Pump Based on SolidWorks

  2. 基于CATIA的渐开线变位齿轮参数化建模与二次开发

    Parametric modeling and secondary development of involute modified gear based on CATIA

  3. 渐开线变位齿轮封闭图的研制及CAD

    An approach on the profile limiting chart of involute modified gears and ' cad '

  4. 基于VB、Pro/E的渐开线变位齿轮的设计

    Designs of the involute modified gears under VB 、 Pro / ENGINEER

  5. 在SolidWorks中,以VISUALBASIC为开发工具,通过对渐开线变位齿轮加工原理的分析,得出组成齿廓的各部分曲线,并确定其曲线方程。

    According to machining theory of involute modified gear , all curves that constitute gear profile are achieved . Their equations are also deduced with Visual Basic in SolidWorks .

  6. 根据外啮合齿轮泵的应用特点合理选择和计算出变位齿轮的各设计参数,利用SolidworksAPI相关函数绘制出完整齿廓并完成实体建模。

    Based on application of outer-tooth gear pump , every design parameter is reasonably selected and computed . Full gear profile is drawn and solid modeling is accomplished by the function of SolidWorks API .

  7. 运用极值理论详细论证了角变位齿轮传动变位系数之和xE恒大于分度圆分离系数y。

    It 's testified by using theory of limit value that the sum of modification coefficients xE is more than the separate coefficient of normal pitch circle y at modified gearing of working pressure angle .

  8. 介绍了在UG软件环境下,标准齿轮和变位齿轮的三维参数化设计的通用方法,并在此基础上实现了齿轮传动系统的结构设计和虚拟装配。

    In this paper , a method is introduced that how to modeling standard gear and modified gear through general technique parametric design based on UG . Then we can use those gears which carry out the structural design and virtual assembly of the gear system .

  9. 介绍了GA738型剑杆织机卷取机构的设计情况,从其传动原理、纬密表的制作、变位齿轮的计算等方面作了分析说明。

    This article introduces the design of the take-up mechanism of GA738 rapier loom with driving principle analyzed , picks insertion table made , and profile correction of driving gear calculated .

  10. 变位齿轮几何系数的实用计算

    Practical Calculation of Geometry Factor of Gear THE ECONOMICS AND GEOMETRY

  11. 长齿顶齿轮;径向正变位齿轮;径向正变位齿轮力车轮胎胎圈着合直径

    Long addendum gear bead diameter at rim seat of cycle tyre

  12. 变位齿轮泵基本参数的可视化计算

    Visual calculation of main parameters for gear pump with corrected gears

  13. 变位齿轮按抗胶合能力的最佳设计

    Optimum design of Profile-Shifted gears based on scoring resistance criterion

  14. 圆锥变位齿轮齿形检验夹具的研制

    The development of the inspection jig for cone deflection gear serrated form

  15. 大变位齿轮变位系数的可视化设计

    The visual design of modification coefficient of big modified gears

  16. 高齿大变位齿轮的应用

    Application of High Addendum Gear with Large Codification Coefficients

  17. 大变位齿轮在回转窑上的应用

    Application of Highly Modified Involute Gears in Rotary Kilns

  18. 外啮合角度变位齿轮传动的特性及其结论分析

    Characters of Angle Correcting Gear Drive of External Engagement and Analysis of Results

  19. 变位齿轮传动设计电子动态封闭图

    Electronic Dynamic Closed Graph of Modified Gear Transmission Design

  20. 外啮合变位齿轮几何参数的优化设计

    Optimization Design of Geometric Parameters for External Modified Gears

  21. 双变位齿轮的研究与改进

    Research and Improvement on the double Modification Gear

  22. Pro/Program的变位齿轮参数化设计研究

    Research on the parametric design of profile shifted gear based on Pro / Program

  23. 大变位齿轮的计算及其在甲板机械设计中的应用

    Calculation of Large Modified Involute Gear and Its Application to Design of Deck Machinery

  24. 变位齿轮传动热弹流润滑分析

    Analgsis and Research on the Thermal Elasto-hydrodynamic Lubrication of Spur Profile shifted Gear Transmission

  25. 内啮合渐开线变位齿轮传动的干涉线图

    The Interference Graph of Variable-line Annular involute Gear

  26. 正变位齿轮齿顶厚度必变小的证明

    A Proof of Thinned Addendum Thickness of a Gear Tooth Generated with Positive Correction

  27. 对角度变位齿轮传动削顶量的探讨

    Research on Cutting-down Quantity of Gear 's Top for Gear Transmission with Modified Pressure Angle

  28. 因此对于插切加工大变位齿轮有利于提高齿轮弯曲强度。

    So slotting big shift coeffcient gear will have advantages for improving gear bending strength .

  29. 角度变位齿轮传动的几何计算

    Geometry calculation for angular displaced gear drive

  30. 利用轮齿尺寸关系计算角变位齿轮几何尺寸

    Applying the Relation of Gear Size to Calculating the Geometric Size of Gear with Displacement Angle