参考电路

采集系统由输入预处理电路、电压参考电路、时钟电路和基准电压电路构成。

The acquisition system is composed of pre-processing circuit , voltage reference circuit , clock circuit and standard voltage circuit .

对闭环电码化系统检测原理结构、发码过程，闭环检测、可靠性等进行分析阐述，并给出部分参考电路。

It was discussed the check principle structure , the codes ' transmitting , closed loop check , reliability of the Closed Loop Telegraphic Codes System with some reference circuit .

有关保险丝分配，请参考电路图的电流问题。

For fuse assignments please refer to the current issue of the wiring diagram .

对测量电路和参考电路施加相同的驱动波形，测量2个串联电容器之间的电压差即可得到壁电荷的值。

The wall charge can be obtained from the voltage difference between the two capacitors .

该系统能根据设计者输入参数，提供参考电路拓扑、关键参数和仿真波形，并允许设计者作参数的修正。

It can provide target circuit and main parameters base on the input variables , simulation waveforms in MATLAB is also provided to enable user to retouch the parameters .

概述了该设备的基本组成和功能，对设备和航天器之间的控制信息、状态信息和测量信息的接口设计技术作了较详细地论述，并且结合有代表性的示例给出了参考电路图和说明。

The main components and functions of the equipment are described briefly , the interface design technology for control , status and measurement messages are explained , and the electrical diagram and its explanation as typical examples are shown .

采用图形、文字和测试数据相结合的方式，介绍电吹风骚扰电压和骚扰功率的产生机理，并给出了抑制骚扰的参考电路。

Adopt combination of the figures , Character and test data together , introduce the mechanism , explain how the disturbance voltage and disturbance power from electrical hair drier , and give the reference circuit about restraining the disturbance .

为了简化可变参考电压电路结构，并且降低该参考电压的温度系数，讨论了一种输出可调节的CMOS带隙基准电路。

To simplify the structure and lower the temperature coefficient of changeable voltage reference circuit , the design of a CMOS bandage reference ( BGR ) with adjustable output is discussed .

首先，根据提出的两种亚阈值MOSFET基准电路模型，设计了两款简单适用的低电压低功耗MOSFET基准参考源电路。

Firstly , two simple MOSFET voltage references suitable for low voltage low power are designed which is based on the two models of the sub-threshold MOSFET reference circuit presented .

研制了模数转换电路以及高精度的参考电压电路。

Develops analog-digital conversion circuit and high-precision reference voltage circuit .

给出了一个参考接口电路。

And a reference interface circuit is given .

电荷泵核心部分为一带有参考电压电路的双管开关型电路，并对运放构成的反馈回路进行了改进，降低了电荷泵输出电压的抖动。

The core circuit of the charge-pump consists of two-transistor switches and employs a dummy reference branch , the feedback circuit constituted of an OPA is improved to reduce the spikes of the output voltage .

具体对运放的共模差分输入级、输入级线性跨导控制电路、电流和电路、浮动AB类输出级电路、运放的偏置电路和带隙参考电流源电路进行分析设计。

Specifically analysed and presented the common-mode differential input stage , linear transconductance control circuit of input stage , current sum circuit , floating AB-class control output stage , the bias circuit of OP Amps and the bandgap reference current source circuit .

本次论文详尽地分析和研究了新型CMOSRail-to-Rail运算放大器的结构，完成了两级压缩式CMOSRail-to-Rail运算放大器和CMOS带隙参考电流源电路的设计。

In this thesis , analysed and designed the architecture of the new type CMOS Rail-to-Rail operational amplifiers in detail , and successfully designed one of two stage compact CMOS Rail-to-Rail amplifier and the CMOS bandgap reference current source .

在环路设计时，采用了自偏置结构，使得电源电压可以由单一电源1V电压提供，另外省去了参考电流产生电路。

This thesis uses self-biased structure in the loop design , then the supply voltage can be only 1V power and it eliminates reference current generating circuit .

参考方向对电路分析的影响与选择

The influence and selection of the reference direction to circuit analysis

在平均电流控制系统中，围绕乘法器给出了参考正弦波发生电路、电压误差放大器、电流误差放大器等参数设计。

In the average current control system , the parameters of input voltage sensing circuit , voltage error amplifier and current error amplifier are designed .

介绍了可编程多通道TFT-LCD参考电压发生器专用电路EL-5825的工作原理、特点及应用。

The principle , characteristics and applications of EL-5825 which is the programmable 8-channel TFT-LCD reference voltage generator ASIC are introduced .

通过研究对数运算电路独特的运算特性，设计出一种满足消除电桥参考电压影响的电路模型，为高精度电桥类传感器设计提供了一种独特的减小失调误差影响的手段。

The property of the logarithm circuit is studied . A model is given to reducing the error of bridge , and a kind of high-precision transducer without the influence of the voltage supply is designed .

锁相环是一种输出信号在频率上能够与输入参考信号同步的电路系统，它是模拟及数模混合电路中的一个基本的并且非常重要的模块。

Phase-locked loop ( PLL ) is a circuit which can synchronize its output signal with an input reference signal in frequency . It 's a fundamental and very important module in analog and mixed-signal integrated circuits .

用于PipelineADC的参考电压和参考电流的电路系统

Circuit System of Referenced Voltage and Electricity for Pipeline ADC