压铸模

根据国外发展压铸模CAD／CAM的经验和我国的具体情况提出了发展压铸模CAD／CAM的建议。

The suggestions of developing die casting die CAD / CAM are offered , according to external experience and internal concrete conditions .

我国压铸模CAD/CAE/CAM及其一体化技术

Integration Technology of Domestic Die Casting Die CAD / CAE / CAM

基于Solidedge的节流阀体压铸模CAD/CAM

CAD / CAM for throttle body die-casting mold based on solid edge

基于产品约束模板的压铸模参数化CAD系统

Product constraint template based parametric CAD system of casting die

基于面向对象设计方法的压铸模CAD系统的研究

Study on Die Casting Die CAD System Based on Object-Oriented Design Methods

CAD在压铸模设计中的应用

Application of CAD in Design of Pressure Die casting Die

压铸模CAD系统的研究

Study on the CAD System of Die Casting Die

铝合金压铸模CAD技术

The CAD Technology of Diecasting Mould for Aluminum Alloys

基于Pro/Engineer的压铸模CAD实现方法研究

The research of realization technique of die-casting mould CAD based on Pro / Engineer

压铸模CAD系统斜销抽芯机构模块分析

Analysis on the Module of Bevel Pin Core Pulling Mechanism of Die-casting Die CAD System

压铸模CAD系统开发

The Development of Die-casting Dies CAD System

对压铸模智能CAD系统中特征参数化实体建模技术进行了研究。

The solid modeling in CAD die casting die system based on characteristic parametrization was developed .

AutoCAD环境下压铸模浇注系统设计

Design of Runner System of Diecasting Mould in the AutoCAD Environment

基于UG平台的压铸模CAD/CAM系统设计与实践

Design and Practice of Casting Die CAD / CAM System Based on UG

UG环境下端盖的三维建模及压铸模设计

Design for 3D model and die casting mould of cover in the UG environment

基于CAE分析的电脑外壳压铸模浇注系统的设计

Design of Gating System for Die Casting die of Magnesium Computer House Part Based on CAE Analysis

通过研究压铸模CAD的基本特征，以UG为平台构建了压铸模CAD系统框架。

On the basis of characteristics of the Die casting die CAD , using UG as platform , die casting die CAD systematic frame have been build up .

基于UG/KF的镁合金压铸模KBE平台设计和研究

Design of KBE System for Magnesium Alloy Die-casting Die Based on UG / KF

近年来，模具CAE技术虽然已在注塑模、压铸模设计中得到应用，但仍存在不少问题。

Though mold CAE technology has already been used in injection mould and die casting mould design recently , there are still many problems .

本文通过CAD在压铸模设计中的应用，提出了开发产品和设计模具的新思路，使产品研发周期缩短成为可能。

New thinking of developing products and designing die has been put forward in applying CAD to design of pressure diecasting die , hence it becomes possible to reduce circle time in developing .

基于KBE的压铸模斜销抽芯机构计算机辅助设计系统的开发

Development of CAD System of Bevel Pin Core Pulling Mechanism in the Die-casting Mould Based on KBE

本课题所开发的基于KBE的压铸模浇注排溢计算机辅助设计系统，为使用者提供了一个快捷智能的压铸模浇注排溢系统设计工具。

The KBE pouring-exhausting-flooding system discussed in this thesis provides an intellective tool for users ' convenience .

阐述三维压铸模CAD系统中关键技术之一&补孔和槽的原理，实现补孔和槽的算法，并在压铸模CAD中得到应用。

The principle of patch hole and slot has been studied , which is the key technology of three-dimensional die-casting die CAD . And the algorithm has been practiced and applied in the die-casting die CAD .

运用UG软件的复合建模技术进行4J34柴油机机体压铸模的设计，建立参数化驱动的三维数字化模型。

Using the compound modeling technology of UG software to carry on the4J34 diesel engine body diecasting die design , established the3D digitized model that the parametrization actuation .

基于拉链压铸模的特点，使用Pro/Toolkit对Pro/E系统的二次开发，完成了拉链压铸模CAD系统的开发。

The develoment of die casting die CAD system for drag-chain has been completed based on secondary development of Pro / E software using Pro / Toolkit aiming at the chararcteristics of die casting die for drag chain .

采用脉冲TIG焊马氏体时效钢金属粉芯焊丝堆焊铝合金压铸模表面来提高模具表面性能。

Hardfacing material of maraging steel metal powder-cored wire was deposited by pulse TIG on aluminum die cast dies to improve the dies ' properties and extend its service life .

压铸模材料4Cr5Mo2MnVSi（Y10）钢的研究与应用

Research and Application of Die Casting Die Material 4Cr5Mo2MnVSi ( Y10 ) Steel

压铸模设计专家系统YZMES系模块化结构。

This paper introduces YZMES , an expert system for die-cast mould design .

本文是在Pro/eWildfire开发平台上，利用二次开发工具包Pro/Toolkit开发了一套压铸模规范化设计系统，为使用者提供了一种快捷有效的压铸模设计工具。

In the paper , a normalized design system for die-casting die is developed by using the development module Pro / Toolkit on the platform of Pro / E Wildfire , which provides an effective tool for engineers to design die-casting dies .

针对EA111油底壳铝合金压铸件的结构特点及工艺要求，介绍了一种切实可行的压铸模设计方案。

Aiming at the structure features and technological requirements for EA111 aluminum alloy oil tank , an available design plan for die casting die was described .