压痕

yā hén
  • indentation;impress;impression
压痕压痕
压痕[yā hén]
  1. 并采用维氏压头测量断裂韧性KIC和通过扫描电子显微镜观察压痕形貌来评定涂层的韧性。

    The fracture toughness KIC of TiAlN coating has been measured by Weishi indenter indentor and the appearance of impress has also been observed by SEM .

  2. 维氏硬度试验压痕图的小波分析与自动计算硬度

    Automatically Analyzing the Impress Image of Vickers Hardness Test Using Wavelet

  3. 一棵倒下的树在坚硬的泥地上留下了清晰的压痕。

    A fallen tree has left a clear impression in the hardening mud .

  4. Li2-ZnO-SiO2系微晶玻璃压痕试验的声发射检测

    Acoustic emission testing of Li2O-ZnO-SiO2 system nucleated glass in indentation test

  5. 压痕硬度随着Cu含量的增加而增大。

    Indentation hardness increase with the increasing of Cu content .

  6. 压痕过程中非晶Cu形变诱导晶化行为的原子模拟

    Atomistic simulation of deformation-induced crystallization behavior during the indentation process for amorphous Cu

  7. 磁控溅射TiN界面结合强度的压痕法测试

    Measurement of Bonding Strength of Magnetic Sputtered TiN Coatings by Indentation Method

  8. 压痕法测定结构陶瓷K(IC)值精度的探讨

    Exploration on measuring accuracy of indentation method for determining k_ ( ic ) values in structural ceramics

  9. 球形压痕法评价(Ti,Nb)N膜层断裂性能

    Evaluation of Fracture Toughness of ( Ti , Nb ) N Coatings by Spherical Indentation Test

  10. 本文采用压痕试验法研究了热处理工艺对铸态Fe基大块非晶合金脆性的影响。

    The effect of heat treatment on the brittleness of the cast alloy was studied by indentation technique .

  11. 室温下单晶硅显微压痕表面位错组态的TEM观察

    TEM observations of the dislocations from micro-indentation surface in single crystalline silicon at room temperature

  12. Si3N4和SiC陶瓷材料的压痕断裂行为和断裂韧性测量

    Indentation Fracture Behaviours and Measurement of Fracture Toughness of Si_3N_4 and SiC Ceramics

  13. 按照工厂制作的压痕确定拉锤相对b柱的位置并记下来。

    Determine the position of the striker pin in relation to the B-pillar according to the impression made at the factory and note it down .

  14. 测量后,用AFM观察压痕形貌。

    After measurement , the residual impressions were scanned using AFM .

  15. SiC/Al2O3纳米复合材料压痕残余应力压谱法测量研究

    Study on the Measurement of Residual Stresses around Indentations inSiC / Al_2O_3 Nanocomposite Using Fluorescence

  16. 扫描电镜(SEM)对磨损表面分析表明,磨损机理主要是犁沟和应变疲劳两种。用压痕法测量的涂层断裂韧性顺序与涂层的耐磨性顺序一致。

    The SEM study showed that the furrow and strain fatigue effects could be the main wear mechanisms .

  17. 采用SEM,TEM和纳米压痕技术等分析了表面纳米晶层的组织结构与力学性能。

    SEM , TEM and nano - indention techniques were used to analyse microstructure and mechanical properties .

  18. 采用维氏压痕-淬火法研究了材料的抗热震性能,压痕-强度衰减法研究了材料的R曲线。

    The thermal shock resistance and R curve of nanocomposites were investigated by means of indentation-quenching and indentation quenching-retained strength testing methods .

  19. 用AFM压痕技术定量介观硬度的方法研究

    Study on Method of Quantitative Measuring Nano-hardness Based on AFM Indentation Technique

  20. 压痕诱发GaAs塑性变形区的层错结构

    Stacking-fault structure induced by indentation in GaAs

  21. 压痕诱发GaAs单晶的塑性变形

    Indentation-Induced Deformation in GaAs Single Crystal

  22. 骨折发生部位。人工水晶的压痕断裂行为及其K(1c)测量

    The Indentation Fracture Behaviour and Measurement of K_ ( 1C ) for Artificial Quartz Crystals

  23. 用压痕试验法研究CVD金刚石膜的粘附性能

    Application of Indentation Test Method in Investigating Adhesion Properties of Chemical Vapor Deposited Diamond Films

  24. 用压痕测试技术分析了PZT材料极化前后的内应力大小和分布情况。

    The values of internal stress and its distribution in PZT were analyzed using indentation technique .

  25. KDP晶体超精密加工表面硬度压痕尺寸效应研究

    Hardness indentation size effect of KDP crystals for ultra-precision machining surface

  26. 根据显微硬度压痕附近的裂纹长度,评价了Ti离子注入Si_3N_4陶瓷表面的断裂韧性。

    Surface fracture toughness of Si_3N_4 ceramics im-planted with Ti ions is evaluated based on the crack length in the neighbourhood of indentation .

  27. 压痕法研究ZrO2层状复合陶瓷的抗热震性

    Study of thermal shock resistance for ZrO_2 laminated ceramics by indentation method

  28. 根据压痕载荷-强度实验结果,测定层状陶瓷的阻力曲线,并与单相SiC陶瓷对比。

    The R-curve of SiC / BN laminated ceramics was evaluated using the indentation-strength method and compared with that of the monolithic SiC .

  29. ZrO2/CePO4可加工陶瓷的性能与压痕裂纹形貌

    Mechanical Properties and Morphology of Indentation Crack of Machinable Ce-ZrO_2 / CePO_4 Ceramic

  30. ZrO2层状复合陶瓷压痕开裂力学分析

    Indentation Cracking Mechanical Analysis of ZrO_2 Laminated Ceramics