功能陶瓷

Bi2O3掺杂对Nb2O5-TiO2电容-压敏双功能陶瓷的影响

Effect of Bi_2O_3 Doping on Nb_2O_5-TiO_2 Capacitor-Varistor Double Functional Ceramics

PTC功能陶瓷材料制备及其影响因素研究

A study on preparation and effecting factors of PTC functional ceramics material

Ni、Cu掺杂钛酸锶复合功能陶瓷的电学特性

Electrical Characteristics of Ni 、 Cu Doped SrTiO_3 Multifunction Ceramics

Al2O3/TiC系梯度功能陶瓷刀具材料的设计

Design of al_2o_3 / tic functional gradient ceramic tool material

LaB6功能陶瓷材料的研究现状

Present Status of Research on LaB_6 Functional Ceramic Materials

（Sr，Ca）TiO3系复合功能陶瓷的涂覆离子热扩散

Thermal diffusion of coating ions in ( sr , ca ) tio_3 multi-function ceramics

YAG光学功能陶瓷材料

YAG optical function ceramics

ICP-AES法测定Nb：SrTiO3晶体及功能陶瓷材料中的铌含量

Determination of Nb in Nb : SrTiO_3 Crystal and Functional Ceramic Materials by ICP-AES

基于LIF技术的功能陶瓷CMP加工过程研究

Research on Chemical-Mechanical Palarization Process of Functional Ceramics Based on LIF Technology

Tc的表达式，并以此作为梯度功能陶瓷圆球的抗热震参数。

Tc leading to the critical thermal stress at the surface as the thermal shock resistance parameter for FGM ceramic spheres was obtained .

用PAT研究SrTiO3双功能陶瓷的缺陷结构

A Study on Defect Structure of SrTiO_3 Capacitor-Varistor Ceramics by PAT

本文报道以ZnCr2O4为主晶相的该系功能陶瓷的湿热特性、感湿宏观机理以及添加稀土氧化物对其湿热性能的影响。

In this paper , the authors reported that humid-thermal characteristics , humidity-sensitive mechanism of ZnCr_2O_4 ceramics and the influences of humid-thermal characteristics by dropping rare-earth oxides .

光催化功能陶瓷对乙烯、油酸、SO2和NOx的降解率达到95%～100%。

Degradation ratio of ethylene , oleic acid , SO 2 and NO x reached 95 % ~ 100 % respectively for the photocatalytic functional ceramic .

氮化铝（AlN）是非氧化性高功能陶瓷材料，具有许多优异的物理化学性质，日益被人们所重视。

Aluminum nitride , the material of non-oxidative high preformance ceramics , is receiving increasing attention due to its physical and chemical advantageous properties .

OTS自组装单层膜诱导定向生长SrTiO3功能陶瓷薄膜

Orientation Growth of SrTiO_3 Functional Ceramic Thin Film Directed by OTS Self-Assembled Monolayer

计算了梯度功能陶瓷刀具和普通陶瓷刀具内的最大Mises应力、最大剪应力和最大拉应力。

The maximum mechanical stresses ( Mises stress , tresca stress and principal stress ) in functionally graded ceramic tools and common ceramic tools were calculated .

连续Si-Fe-C-O功能陶瓷纤维的制备及其表面分析

Preparation and Surface Depth Analysis of Continuous Si-Fe-C-O Functional Ceramic Fibers

在高温发热材料、固体氧化物燃料电池连接材料、催化剂、NTC热敏电阻等方面都得到广泛的应用，是一种很有前途的功能陶瓷材料。

It is a functional ceramics that is widely used as heating element , interconnector of solid oxide fuel cell ( SOFC ), catalyzer and NTC , etc.

本文主要对CMP加工过程进行了研究，并对其的加工应用做了实验，实验结果证明CMP技术是先进的，是功能陶瓷材料的首选抛光方法。

In the paper , the fundamental research on CMP process is done , and the practical application is experimented . The experimental results show that the CMP technology is advanced .

一次烧成制度对SrTiO3基电容-压敏复合功能陶瓷材料的影响

Effeets of Single-Fired Process on the Characteristics of SrTiO_3-based Capacitor-Varistor Ceramic Materials

SrTiO3基双功能陶瓷及纳米掺杂改性的研究

Studies on SrTiO_3 Based Dual-functional Ceramics and Modified by Nano-dopants

SrTiO3复合功能陶瓷中烧结助剂的研究

Investigation on the sintering aid in srtio_3 multifunctional ceramics

SrTiO3双功能陶瓷表面层效应的研究

Research on the Surface Layer of SrTiO_3 Varistor Ceramic

SrTiO3系复合功能陶瓷的一次烧成机理

Mechanism of Single-Sintering Process for Preparing SrTiO_3-Based Multifunction Ceramics

SrTiO3双功能陶瓷中CaTiO3掺杂的研究

CaTiO_3 Doping Behavior in SrTiO_3 Bouble Function Ceramics

一次烧成SrTiO3复合功能陶瓷中掺杂Ag~+离子的行为及其机制

Behavior and its mechanism for doped Ag ~ + ion in single-sintered SrTiO_3 multifunction ceramics

本文选择ZnO和Pb（Mg13Nb23）O3为基体材料，利用轧膜技术制备了多层片式结构的压敏电容双功能陶瓷元件。

A Novel Varistor-Capacitor Multilayer Ceramic Device was fabricated using rolling techniques . The ZnO-based materials and Pb ( Mg_ ( 1 / 3 ) Nb_ ( 2 / 3 )) O_3-based materials were chosen as the respective varistor and capacitor components .

Si-C-Fe-O功能陶瓷纤维的制备

Preparation of Si-C-Fe-O Functional Ceramic Fiber

ZrO2气凝胶在催化科学、材料科学、电学等诸多领域有着广泛的应用，可用作性能优良的催化材料、结构陶瓷和功能陶瓷的原料、电极材料。

ZrO_2 aerogel has wide applications in many fields such as catalytic science , materials science or electricity . It can be used as good catalystic materials , structural ceramic and functional ceramic raw materials , electrode materials .

因此，迫切需要深入研究功能陶瓷精密CMP抛光工艺参数优化技术以构建功能陶瓷精密CMP抛光的有效工艺参数决策支持平台。

Thus , for the sake of establishing an effective process parameters decision support platform for precision polishing of function ceramics , it is urgent necessary to study the decision and optimization technologies of process parameters for function ceramics in the CMP .