刨花板

这张桌子只不过是在底座上安了一块圆形刨花板。

The table is simply a chipboard circle on a base

抗弯强度是水泥刨花板的主要力学性能指标。

Bending strength is the main mechanical performance index for cemented chipboard .

E0级环保刨花板生产系统解决方案初探

Study on Systematic Solution for Manufacturing Particleboard with E_0 Grade Formaldehyde Emission

E1级刨花板制备工艺的研究

Research on Technology for Producing Grade E_1 Particleboard

改性脲醛树脂的合成及其在E1级刨花板生产中的应用

Synthesis of Modified UF Resin and Its Application in the Manufacture of E_1 Particleboard

谈谈E1级刨花板生产过程中的几点体会

Some Experience of Grade E_1 Particleboard Production

API胶黏剂在麦秸刨花板上的应用

The Application of API in Preparing Wheat Straw Particleboard

研究了聚丙烯（PP）的不同加入量对竹材/塑料复合刨花板性能的影响。

Effects of polypropylene ( PP ) content on properties of bamboo / plastic composite particleboard were researched .

概述了用可编程序控制器（PLC）自动控制刨花板调供胶系统。

Summarizes the application of programmable logical controller ( PLC ) in . the . automatic controlling system for mixing and supplying glue of particleboard .

水泥刨花板（CPB）生产中原辅材料适应性的评估方法与装置

Method and Device for Evaluating Adaptability of Raw Materials on Cement Particle Board ( CPB ) Production

介绍在采用E1级脲醛树脂胶的情况下，生产E1级刨花板对设备、胶粘剂、刨花制备、热压工艺及检测的要求。

An account is given of the requirements for equipment , adhesive , particle preparation , hot-pressing technology and testing methods when producing Grade E_1 particleboard with E_1 UF resin .

结果表明，AE技术可作为检测刨花板力学性能的补充手段。

Experiment results show that AE technique can be used as a supplemental method to detect mechanic performance of particleboard .

吸着饱和点SSP是刨花板吸湿变形的临界含水率。

Sorption saturation point ( SSP ) was the critical moisture content for hygroscopic deformation of RSPB .

PVAc添加量对热压法快速固化水泥刨花板性能的影响

Effects of the Addition of PVAc on Performance of Hot Pressed Cement Particleboard

选用施胶量、甲醛捕捉添加剂、挤压温度、挤出速度为试验因子，探讨E1级空心刨花板的生产工艺。

The objective of this study was to optimize the manufacturing process for producing tubular particleboard with E1 grade performance .

用非线性单纯形法研究了4种农作物秸秆（亚麻屑、麦草、稻草、豆秸）为材料刨花板的水分扩散系数、并用VISUALBASIC编制的计算机程序求出了精确的扩散系数。

The moisture diffusion coefficient of particleboard from 4 kinds of crops straw ( flax bits . wheat stalks . straw , than stalks ) was studied by non-linear simplex technique . Accurate diffusion coefficent was calculated out by Visual Basic program .

MF浸渍纸贴面定向刨花板钢框模板的力学分析与计算

THE MECHANICAL ANALYSIS AND CALCULATION OF STEEL FRAMED FORMWORK MADE BY OSB OVERLAID WITH MF RESIN IMPREGNATED PAPER Processing Technology for Mouldings Overlaid with Veneers

对于刨花板和中密度纤维板（MDF），边部释放速率约为表面的2倍；

For particleboard and MDF , the formaldehyde emission rate from the edge was about double of that from the surface of panel .

两工段定向刨花板（OSB）和均质刨花板的刨花制备技术&来自德国迈耶（Maier）公司的木材加工技术

Preparation Technology of OSB Strands and Homogeneous Particleboard Flakes & Wood Processing Technology from Maier

生产0.6g／cm3的麦秸刨花板，在技术上是可靠的，在经济上是合理的。

Manufacturing wheat-straw particleboard of 0 . 6g / cm3 was reliable technologically and reasonable economically .

结果表明：随着胶粘剂中MDI比率的增加，麦秸刨花板的耐水性能提高，但改善的程度逐渐趋缓；

The result showed that waterproof property of the board was improved in a gradually slow way with increasing the ratio of MDI in adhesive .

适用于加工各种密度板、刨花板、人造板、ABS板、PVC板、有机玻璃板及实木等木材结构，硬度相似的板材；

Apply to processing all kinds of density boards , shaving boards , wood-based panels , ABS panels , PVC panels , organic glass plates and soild wood and others with wood structure and similar hardness .

DN-1号刨花板用低毒性脲醛树脂胶的耐老化性能

The aging-resistant property of DN-1 low-toxic urea-formaldehyde resin glue for particle board

石膏刨花板是用木刨花增强的石膏板，它有较高的MOR和MOE，优良的耐火性和不燃性。

Gypsum flakeboard is a gypsum board with reinforcement by wood flake . It has a higher MOR and MOE , good fire resistance and incombustibility .

当施胶量为4%时，密度为0.6g／cm3的麦秸刨花板的力学性能完全满足国家标准要求；

When resin content was 4 % , the wheat-straw particleboard of 0 . 6g / cm3 could fully meet requirement ;

单层压机中框架合理间距的探讨&兼评BISON刨花板压机框架间距

ON THE PROBLEM OF SPACING BETWEEN THE FRAMES OF A SINGLE OPENING PRESS & - with special reference to " BISON " press for particle board

通过研究刨花表面胶液分布状态，对定向刨花板（OSB）力学性能的影响。

In this article , the relation between resin distribution on strand surfaces and mechanical properties of oriented strand board ( OSB ) was studied .

本文用SAS软件进行数理统计分析，对沙生灌木刨花板和中纤板局部树脂浸渍处理试验结果进行研究，确定出现有试验条件下刨花板最佳浸渍工艺为浸渍压力0.7MPa；

We use the Mathematical Statistic Method to analysis the data . Finding out the best impregnating technology of PB is : pressure is 0.7MPa ;

UF-MDI混合胶刨花板制造过程中施胶方式的探讨

Study on Adhesive Application Method in UF-MDI Particleboard Manufacture

研究了刨花尺寸、试件尺寸对定向刨花板（OSB）平面密度变异的影响。

The paper investigated the influences of flake geometry and specimen size on the horizontal density variation ( HDV ) in Oriented Strand board ( OSB ) .