切削力

目前所得到的切削力模型中，Oxley模型相对来说是考虑材料性能最全面的，但是对于材料的应变速率效应及热软化效应考虑不足。

In the current model of cutting force , Oxley model is the one which considers the material properties comprehensive mostly . However , the material strain rate effects and thermal softening effects are still considered less than .

本文主要研究难加工材料中高强度材料高速铣削加工中的切削力建模。

In this thesis , we lay our emphasis on the model of cutting force of difficult-to-machine materials , especially high strengh materials , in the high speed milling process .

基于FEM的三维切削力预报研究

Study on Prediction for 3D Cutting Force Based on FEM

SiC晶须增强铝复合材料的切削力研究

Study of Cutting Force on Aluminum Composites Reinforced with SiC Whiskers

超声振动钻削SiC颗粒增强铝基复合材料时的切削力研究

Cutting Force Research on Ultrasonic Vibration Drilling of SiC Particle Reinforced Aluminum-matrix Composites

对比了普通PID控制算法和PID/PD复合控制算法的恒定切削力控制性能。

A simple PID control algorithm and PID / PD control algorithm is presented and their performances are compared .

SiCP/2024复合材料切削力与刀具磨损的试验研究

Experimental study on the cutting force and wear of lathe tool for SiC p / 2024 Al Composite

PCD刀具超声振动车削SiCp/Al复合材料时的切削力特性研究

Study on Cutting Force in Ultrasonic Vibration Turning of SiC_p / Al Composite with PCD Cutter

胎面（包括功能尖斜面）的平均切削力（0.45N）小于4个轴面的平均切削力（1.71N），差异有统计学意义（P＜0.01）。

The average cutting force ( 1.71 N ) of four axial surfaces was higher than that ( 0.45 N ) of occlusal surface ( including functional cusp inclines ) ( P < 0.01 ) .

从切削力这一因素来看，PCD是精加工颗粒增强铝复合材料的最佳刀具材料。

PCD tool is the best tool material for precise machining from points of the cutting force view .

介绍了以VC为平台设计开发的一套基于切削力信号分析与处理的刀具磨损实时监测和补偿系统。

Using VC as a design platform , a real-time detecting and compensation system for tool wear based the analyzing and disposing for signals of cutting force is introduced .

研究了不同几何参数的PCD刀具车削铝合金时切削力的变化规律。

The variation regularities of cutting forces of the PCD tools with different geometric parameters in turning aluminum alloy are studied .

以多层前馈神经网络为基本结构，以误差逆传播算法（BP算法）为网络的训练方法，籍助VC语言建立了切削力预报程序；

Feed-forward multi-layer neural networks , trained by the error back-propagation algorithm are used . The predicting cutting force program based on neural network by using Oriented-Object language Visual C + + has been built up .

PVD涂层与未涂层硬质合金刀具切削力的对比试验研究

A Survey on Coating Tools for Metal Cutting Experimental Investigation on Contrasting Cutting Forces of Coated-PVD Cemented Carbides Inserts with Non-Coated Cemented Carbides Inserts

基于人工神经网络的SPRC切削力仿真模型

Simulation Model of SPRC 's Cutting Force Based on Artificial Neural Network

基于切削力曲面模型，采用多项式拟合的方法构建刀具在许可切削力下的侧向切深和进给率的方程，根据建立的方程计算每个刀位点处的进给率并反写到初始的G代码文件中。

Based on the cutting force surface model , a polynomial equation of side cutting depth and feedrate is created to calculate the feedrate of each CL data and the calculated feedrate value is written out with the G-code position data block to an updated version of the die-cavity .

用MATLAB程序可方便有效地实现非线性加工过程的切削力模拟，这对于加工系统的动态设计和教学具有重要的实用价值。

Simulation of the cutting force of machining process is made in MATLAB . It is easy and effective to realize the simulation of the cutting force in nonlinear machining process by using MATLAB programs , which has a practical value on the dynamic design of machining system and teaching .

传感器的灵敏度更高，尤其是主切削力方向可达到7.4pC/N；

Sensitivity of dynamometer is more high , especially main cutting force can attain 7.4pC/N .

认为K类硬质合金可用于粗加工、半精加工，且加工表面会出现熨平现象。从切削力这一因素来看，PCD是精加工颗粒增强铝复合材料的最佳刀具材料。

Moreover , the K-type coated cemented carbide is considered compatible for crude and semi-precise machining , and there is " ironing " phenomenon on the machined surface . PCD tool is the best tool material for precise machining from points of the cutting force view .

当工件材料硬度低于HRC50，切削力和切削温度的变化规律符合普通的金属切削理论，硬度超过HRC50则切削力和切削温度的变化规律大不相同。

While the material machined hardness is lower than HRC50 , the changing rule of cutting force and cutting temperature was accordant with the common cutting theory .

该软件已与笔者前期开发的计算机辅助切削力测试系统实现对接，并已应用于铸态铝合金材料ZL106与DFL-1的铣削力对比试验，实现了实时测试数据处理和直接输出试验报告。

It has been applied in milling force contrast test of molten aluminum alloy material ZL106 and DFL & 1.It realizes both testing on-the-spot and printing the testing report of milling force .

切削力随着水射流压力的增大而减少。

The cutting force reduce with the increase of water pressure .

硬质合金刀具干式切削力的仿真

Simulation of cutting forces with cemented carbide tools in dry cutting

使用中刀具几何参数和切削力变化；

Variation of tool geometry and cutting stress during cutting process ;

硬质合金刀片切削力控制器的设计及仿真

Design and Simulation of Cutting Force Controller for Cemented Carbide Tips

考虑刀杆柔性的球头铣刀切削力模型的研究

Cutting Force Model of Ball End Mill with Flexible Cutter Holder

切削力的理论公式

The Formula of the Theory of the Cutt in g Force

刀具磨损的切削力监测

A New Method of Monitoring Tool Wear Through Measuring Cutting Force

高硅氧玻璃纤维/酚醛树脂复合材料切削力的试验研究

Cutting Force of High Silica Glass Fiber / Phenolic Resin Composites

切削力信号的微型计算机采集及处理

Data-gathering and Data-processing to the Signals of Cutting Forces with Micro-computer