分析电子显微镜

Bi系高温超导体的分析电子显微镜研究

Micro-structure Research of Bi-system Superconductors Using Analytical Electron Microscope

实用Bi系高温超导带材Bi系高温超导体的分析电子显微镜研究

Practical BSCCO high temperature superconducting tapes Micro-structure Research of Bi-system Superconductors Using Analytical Electron Microscope

光折变BaTiO3晶体缺陷的分析电子显微镜研究

Analytical electron microscopy of defects in photorefractive batio_3 crystal

用分析电子显微镜研究了顶部籽晶法生长的BaTiO3晶体内的缺陷。

Defects in photorefractive BaTiO_3 crystal , obtained by the top seed solution growth method , have been studied by analytical electron microscopy .

用X射线衍射和分析电子显微镜进行研究，并用高分辨电子显微镜观察，由JEOLJEM200CX获得晶格象照片。

After a subsequent annealing , the final crystalline products were preliminarily characterized by X-ray diffractometry and then analytical electron microscopy . High resolution lattice images were recorded by JEOL JEM 200 OX electron microscope .

通过X射线衍射、差热分析、电子显微镜、超导电性测量等手段研究了研磨对Y-123和Bi（Ph）-2223超导相和成相过程的影响。

The effect of grinding on superconductors of Y-123 and Bi ( Pb ) - 2223 phases and phase formation have been studied by means of X - ray diffraction , differential thermal analysis , scanning electron microscope and measurements of the superconductivity .

以制盐母液综合利用初级产品为基本原料，通过水热合成法制得碱式硫酸镁晶须，并对其进行了化学分析、电子显微镜观察及X射线衍射分析、FT－IR和TG－DTA分析。

In this paper , basic magnesium sulfate whisker was prepared by hydrothermal synthesis with primary products from bitter brine solution . It was investigated by chemical analyses , electronic microscope scan , X - ray diffraction , FT - IR and TG - DTA analyses .

逻辑分析在电子显微镜故障分析中的应用

The use of logic analysis in analyzing the defect of the electron microscope

一种新型分析扫描电子显微镜

A New Type of Analytical Scanning Electron Microscope

对退火的样品进行了离子探针分析、电子显微镜观察、霍耳测量和四探针测量，并把实验结果和一般热退火样品作了比较。

The samples were studied in terms of Hall measurement , transmission electron microscopy and ion microprobe analysis .

利用X-射线衍射分析和电子显微镜分析的结果，确定堇青石窑具的多晶结构和各晶相的含量；

The Polycrystalline structure and the phase composition of cordierite kiln furniture are deter-mined by means of X-ray and electron microscope .

用X射线衍射分析，透射电子显微镜对纳米铁粉的性能进行了表征。

The properties were characterized by X-ray diffraction analysis , TEM .

应用X-ray衍射分析、扫描电子显微镜（SEM）、比表面积测试（BET法）等分析技术对球磨粉末的微观结构进行了分析。

X - ray diffraction , SEM and the BET method were used to evaluate the microstructure of treated samples .

利用金相、X射线衍射分析、扫描电子显微镜等手段研究了渗氮层的组织、相组成及其磨损机理。

The morphologies , phase structures and abrasive mechanism of nitrided layer were investigated with optical microscope , SEM and X-ray diffraction analysis .

产物通过全自动X射线衍射仪（XRD）进行物相分析，扫描电子显微镜（SEM）观测ZnO晶体的形貌和大小。

The phase identification , morphology and size of the products were characterized by X-ray diffraction ( XRD ) and scanning electron microscopy ( SEM ) .

本文应用X射线分析和扫描电子显微镜技术研究了在常温和蒸汽养护条件下自燃煤矸石水泥水化和强度发展。

In this paper , by means of X-ray analysis and scanning electron microscope technology , the hydration and strength development of spontaneous gangue cement under the condition of normal atmospheric temperature and steam curing are analysed .

采用红外光谱、接触角测试、X射线衍射、热重分析、扫描电子显微镜等方法研究改性前后苎麻纤维的结构及性能。

Techniques , such as infrared ray ( IR ), contact angle measurement , X-ray diffraction ( XRD ), thermogravimetric analysis ( TG ) and scanning electron microscopy ( SEM ), were employed to study the structure and properties of ramie fiber .

通过使用X-射线衍射（XRD）仪进行试样的相分析，扫描电子显微镜（SEM）对试样进行形貌分析，研究钒钛生铁试样的结构对光谱分析结果的影响。

By using X-ray diffractometer and scan electron microscope to analyse phase and morphology of sample respectively , the influence of structure for vanadium titanium cast iron sample on the analytical results obtained by atomic emission spectrometry was studied .

本文通过X射线衍射图谱分析和透射电子显微镜照片鉴定，南极东胡安池塘沉积物中，存在着具有代表独特环境特征和沉积学特征的方解石、石膏、石盐和坡缕石等矿物。

Through X-ray diffraction and transmission electron microscope photographs it is discovered that there are many minerals , such as Calcite , Cypsum , Halite and Palygorskite , which have a unique environment and special deposit features in the sediments of the Don Juan pond .

利用X射线衍射、电子探针微分析、扫描电子显微镜和差热分析测定了Cr-Ni合金样品和扩散偶Cr-Ni样品，构筑了Cr-Ni二元体系的相图。

Cr Ni binary system was constructed by the determination of normal alloy samples and diffusion couple samples using XRD , electron probe microanalysis , scanning electron microscopy and differential thermal analysis .

通过红外光谱分析和扫描电子显微镜（SEM）对WPCs的表面状态和微观结构进行了表征和分析，初步探索了WPCs的老化机理。

The surface properties and microstructure of WPCs were characterized and analyzed by infrared spectroscopy and scanning electron microscopy ( SEM ) . The aging mechanism of WPCs was preliminarily explored .

利用光学显微镜、背散射电子衍射（EBSD）显微分析及透射电子显微镜（TEM）等手段，对复合挤压件和单筋件成形后各特征区域组织进行了定性描述和定量表征。

Optical microscope ( OM ), electron backscattered diffraction ( EBSD ) and transmission electron microscope ( TEM ) was employed to give a qualitative description and a quantitative characterization of the microstructure in characteristic regions of the profiles .

在前人工作的基础上，设计了15个关键合金和4个扩散偶，通过X射线衍射分析、扫描电子显微镜与能谱仪等分析手段，对Fe-Ni-Zn体系550℃的等温截面进行了实验测定。

The whole isothermal section of Fe-Ni-Zn system at 550 ℃ was determined with 15 key alloys and 4 diffusion couples by means of the X-ray diffraction and scanning electron microscopy with energy dispersive X-ray spectroscopy ( SEM / EDX ) .

用水热法在乙二胺-Al2O3-P2O5-H2O体系中合成磷酸铝分子筛AlPO4-12.晶化产物用X-射线粉末衍射分析，扫描电子显微镜观测和化学分析法进行表征。

The aluminophosphate molecular sieve AlPO_4-12 was synthesized by hydrothermal method in the System of Ethylenediamine ( C_2H_8N_2 ) - Al_2O_3-P_2O_5-H_2O . The Crystalline Product was characterized by X-ray powder diffraction analysis , scanning electron microscopy , and chemical analysis .

方法：使用免疫印迹分析及免疫电子显微镜检查。

METHODS : Im-munoblotting analysis and immunoelectron microscopy were used .

分析型反射电子显微镜和表面科学&实验技术和发展

Analytical reflection electron microscopy and surface science a review of experimental techniques and recent progress

比表面积和孔容积的增加，会导致钙利用率的增加，与热重分析和扫描电子显微镜分析得到的结果是一致的。

When the surface areas and pore volumes increase , the calcium utilization rate is improved .

采用偏光显微镜、X&射线衍射分析、扫描电子显微镜等现代化检测技术对等离子体沉积碳膜进行结构分析，结果表明，该碳膜为各向同性结构。

Structure analyses of the deposited films were carried out by means of x-ray diffraction and SEM .

利用红外光谱、热失重分析、透射电子显微镜及吸水率测量等手段对聚合产物的化学结构和胶膜的表面性能进行了表征。

The infrared spectroscopy , thermogravimetry , transmission electron microscopy and water absorption rates measurement are used to characterize the chemical structure and the surface properties of the polymer films .

PNIPAM/LnW10纳米颗粒通过一系列表征，如傅立叶变换红外光谱、紫外可见光谱、热重分析、透射电子显微镜、扫描电子显微镜、动态光散射和发光光谱。

The PNIPAM / LnW10nanoparticles were characterized by FT-IR , UV-vis spectra , thermogravimetric analysis , transmission electron microscopy , scanning electron microscope , dynamic light scattering and luminescence spectra .