冷屏

用MATLAB实现圆形冷屏限制下投影面积的准确计算

Accurate Computation of the Area of Projected Surface Under Limitation of Circular Cold Shield with MATLAB

用蒙特卡罗方法和MATLAB计算田径场形冷屏的视场角

Computation of Angle of Viewing Field of Track Field Shape Cold Shield with Monte Carlo Method and MATLAB

EAST磁体及冷屏测量系统设计

Design of metrical system for magnet and thermal shield in EAST

EAST托卡马克装置外冷屏的热负荷分析

Analysis of Thermal Load for EAST Tokamak Cryostat Thermal Shield Design

EAST托卡马克装置冷屏的真空要求与受热分析

The analyze of vacuum and heat load for ts of EAST Tokamak

冷屏是EAST超导托卡马克核聚变实验装置的重要部件之一。

The thermal shield ( TS ) is a main part of EAST superconducting Tokamak .

EAST运行中的温度改变会导致磁体及冷屏产生形变和位移。

The deformation and displacement of magnet and thermal shield will take place due to the temperature change during EAST operating .

ITER超导馈线系统中TF线圈终端盒冷屏的设计

The design of thermal shield for ITER TF coil terminal box

作者根据材料力学和结构力学，通过Pro/MECHANICA编码计算，对在静态氦压与稳态温度场的组合作用下的氦冷屏基元管道模型，进行了结构力学（Mechanics）分析与优化。

The mechanics analysis and optimisation for the basic element channel model of helium cooling panels under helium pressure and temperature field were carried out with the Pro / MECHANICA code .

ITER磁体馈线冷屏的初步设计

Preliminary design of thermal shield for ITER magnatic feeder

HT-7U装置内冷屏感应电流分析

Eddy Current Analysis of the Internal Thermal Shield of HT-7U Tokamak

ITER极向场馈线系统冷屏初步设计

Cold Mountain Bungee Jump Preliminary design of thermal shield for ITER poloidal field feeders system

介绍了用蒙特卡罗方法和MATLAB计算圆形冷屏内壁表面辐射落入探测器芯片比例的一种解决方案。

A method for calculating the ratio of the radiation rays falling on a detector chip from the inner wall of a circular cold shield by using the Monte Carlo method and MATLAB is presented .

ITERCTB盒冷屏的支撑结构与传热耦合分析圆盘的旋转可抵挡重力以支撑本身的结构。

Coupled analysis between structure and heat conduction on the thermal shield support of CTB for ITER A DISK 'S ROTATION holds it up against gravity .

世界各超导托卡马克装置冷屏结构的设计HT-7U超导托卡马克装置真空室热烘烤结构数值模拟与分析

Structural Design of Thermal Shields of Superconducting Tokamaks in the World Numerical Simulation and Analysis for the Baking out System of the HT-7U Super-conducting Tokamak Device

ITER极向场馈线系统采用冷屏以降低4K温区低温部件的热负荷。

ITER Poloidal Field ( PF ) Feeders system use thermal shield to minimize heat loads which transferred from warm parts to the components that operate at 4K .

模拟了SCQ磁体冷屏上的温度分布，提出8管冷却方案来取代原设计中4管冷却方案。

The temperature distribution of heat shields was simulated and the eight tubes cooling scheme was presented to replace the four tubes cooling scheme .

超导二级磁体用杜瓦冷屏的设计

Design of Dewar cooling shell for superconducting dipole magnet

对冷屏系统的氦泄漏漏率做了计算，介绍了其检漏实践；

The helium leakage from TS is estimated and the leak detecting of TS is described .

辐射器冷屏辐射热分析

Thermal analysis of radiator cooling plate

圆形冷屏下红外焦平面探测器光敏元立体角的计算及其成像仿真

Calculation of solid angle of pixels of IRFPA detector under circular cold shield and its imaging simulation

同时，对磁体和冷屏进行有限元分析，得到了磁体和冷屏在低温下的变形与位移情况；

Meanwhile , Magnet and thermal shield were analyzed by using FEM , then their deformation and displacement were obtained .

分析结果表明外盒体、冷屏支撑和电流引线支撑的设计是合理可靠的。

The analytical results show the designs about CTB chamber , supports for thermal shield and current lead are all reasonable .

采取有限元法对内冷屏的受热状况进行了计算分析，以验证内冷屏氦冷却管道设计方案的可靠性。

The heat load to the vacuum vessel thermal shield ( VVTS ) is analyzed by FLUENT finite element software in order to demonstrate that the design of cooling tubes is reliable .

研制了适于弹上应用的新型杜瓦结构双色多元红外探测器，通过使用特殊的材料把光学系统的遮光罩与探测器的冷屏巧妙地结合在一起，解决了探测器窗口结霜及光学系统杂散光的问题。

A new type infrared detector ( without Dewar ) applied to cannonball was developed . The problems of being frosted on the detector window and stray light were solved by the coalescent of the optical lens hood and the detector shield .

蒙特卡洛法计算G型辐冷器抛物面屏耦合因子的研究

Research on calculating exchange factors of the parabolic reflector of the G-type radiant cooler by the Monte Carlo method

FY-2C星辐射致冷器太阳屏研制

Solar Screen Development of Radiometer Cooler for FY-2C Meteorological Satellite

超临界锅炉螺旋水冷壁管屏立式成排弯可行性分析

Feasible Analysis on Vertical Panel Bending Machine for Screw Water Wall Panel of Supercritical Boiler

上海锅炉厂有限公司采用脉冲埋弧焊[1~2]技术，对水冷壁管屏拼接工艺进行了焊接试验和产品试生产。

Shanghai Boiler Works Limited introduces pulse submerge arc welding technique to assemble water-walls and a great deal of welding experiments were carried out .

超临界锅炉水冷壁螺旋管屏的平衡管管孔加工难点和要点，以及解决的工艺措施。

The main points and difficult points in the drilling machining of balance tube for screw panel in the drilling and the method of solving these problems are introduced in this article .