低密度聚乙烯

纳米TiO2掺杂对低密度聚乙烯空间电荷行为的影响

Influence of nano-TiO_2 doped low density polyethylene on space charge behavior

低密度聚乙烯（LDPE）膜光&生物降解的研究

The Research on UV-irradiation and Biodegradation of Low Density Polyethylene ( LDPE ) Film

电缆地线芯绝缘采用具有抗氧化性能的K型B类低密度聚乙烯。

Ground cable core insulation used with anti-oxidant properties of K-B type low-density polyethylene .

采用自制的马来酸酐接枝三元乙丙橡胶/线形低密度聚乙烯共混物（（EPDM/LLDPE）-g-MAH），通过熔融共混挤出对回收光盘聚碳酸酯（PC）进行增韧。

Recycled CD Polycarbonate was toughened by maleic anhydride grafted EPDM / LLDPE through melt extrusion .

采用DSC方法研究了纳米二氧化硅（SiO2）填充线性低密度聚乙烯（LLDPE）的熔融特性。

The melt property of LLDPE filled with nano-scale SiO 2 was studied .

以不锈钢纤维作为导电填料，添加到低密度聚乙烯（LDPE）中，制备了一种电磁屏蔽材料。

An electromagnetic shielding material was prepared by adding stainless steel fiber into LDPE .

研究了轮胎胶粉/线性低密度聚乙烯（LLDPE）共混材料的性能。

Property of blend of tyre rubber powder / LLDPE was studied .

用尿不湿边角料代替线型低密度聚乙烯（LLDPE）作为铝塑板的芯层。

Urine-wetness scrap was selected as core of aluminum-plastic panel replacing LLDPE .

共聚聚丙烯（cPP）/线型低密度聚乙烯（LLDPE）共混体系的流变与结晶形为

Rheological Behavior and Crystallization Morphology Of cPP / LLDPE Blend

冲压设计在LLDPE洞（线性低密度聚乙烯）薄膜。

Designed for punching holes in LLDPE ( Linear Low Density Polyethylene ) film .

制备了低密度聚乙烯（LDPE）/二元乙丙橡胶（EPM）/炭黑导电复合材料。

The conductive composites of LDPE / EPM / carbon black were prepared .

采用热重分析仪（TG）考察了高密度聚乙烯（HDPE）/低密度聚乙烯（LDPE）复合交联物的热稳定性。

The thermal stability of HDPE / LDPE crosslinked product was studied by means of thermogravimetric analysis ( TGA ) .

采用木粉分别与聚丙烯（PP）、HDPE、低密度聚乙烯（LDPE）制备了塑木复合材料，并对其性能进行比较。

Plastic-wood composite materials were prepared from wood flour , PP , HDPE and LDPE and their mechanical properties were compared .

DSC等温法研究线型酚醛树脂/低密度聚乙烯共混体系固化过程动力学（Ⅰ）

The Study of Kinetics of Curing Reaction for Blending System of Phenolic Resin and Low Density Polyethylene by Static DSC Method (ⅰ)

本文以低密度聚乙烯（LDPE）为基体，以多壁碳纳米管（MWNTs）为增强材料制备复合材料。

MWNTs / LDPE composites used LDPE as matrix and MWNTs as intensifier in this work .

研究了填充低密度聚乙烯中玻璃微珠含量及其大小对复合体系拉伸弹性模量E的影响。

The effects of glass bead content and its size on the elastic tensile modulus ( E ) of the filled low density polyethylene ( LDPE ) composites are studied .

研讨了添加成核透明剂等对线型低密度聚乙烯（LLDPE）结构与性能的影响。

The influence of nucleating transparent agent on the structure and the properties of LLDPE was researched .

本文介绍了用线型低密度聚乙烯（LLDPE）进行填充发泡的试验结果。

This paper deals with the foaming of Linear Low Density polyethylene ( LLDPE ) with filler .

线性低密度聚乙烯（LLDPE）在振动剪切复合应力场中挤出成型时的流变行为研究

An Investigation of Rheology Behavior of LLDPE under Vibration and Shear Complex Stress Field in Extrusion Molding

本文研究了基体接枝甲基丙烯酸（MAA）对氢氧化铝（Al（OH）3）填充线性低密度聚乙烯（LLDPE）电气性能的改善。

Improvement of the electrical properties of LLDPE compound highly loaded with aluminium hydroxide by grafting methacrylic acid to the matrix is investigated .

其次，本文将制备的纳米二氧化硅／EVA复合改性剂加入到低密度聚乙烯中，对其表面张力、力学性能、热力学性能、表面电阻率、摩擦性能等进行了测试。

Then , the surface tension , the mechanical properties , thermodynamic proper & ties and surface resistivity of modified LDPE had been tested .

介绍粒状线性低密度聚乙烯（以下简称LLDPE）在国产单螺杆挤出机加工试验和相应的工艺技术。

The paper introduces the processing test and technique of particle LLDPE on single-screw extruder made in China .

据市场消息称，唯一走弱的PE产品是C4线性低密度聚乙烯（LLDPE）。

The only PE grade that many market sources considered to be weak was C4 linear low density PE ( LLDPE ) .

研究了不同温度和转速下苯乙烯-丁二烯二嵌段共聚物（SB）低密度聚乙烯聚苯乙烯共混物形态和分散相颗粒尺寸的影响。

The effects of styrene-butadiene diblock copolymer ( SB ) on the morphology of LDPE / PS blends at different temperature and rotational speed were studied .

重点讨论了发泡剂AC、交联剂DCP对低密度聚乙烯/三元乙丙橡胶（LDPE/EPDM）发泡工艺的影响。

The influences of chemical blowing agent AC and cross - link agent DCP on LDPE / EPDM foam forming technology were discussed in detail .

在相同的辐照剂量下，HDPE膜自由基的生成量高于低密度聚乙烯（LDPE），所以预辐照接枝以HDPE基膜为好。

Under the same dose , R · of the HDPE samples was higher than LDPE , and HDPE was chosen for pre-irradiation grafting .

高压低密度聚乙烯（LDPE）是三大聚乙烯通用树脂中最早实现工业化生产的聚乙烯塑料产品。

High-pressure low-density polyethylene ( LDPE ) is the earliest PE material that achieved its commercial production among the three major polyethylene products .

采用浮染法将荧光助剂、红外辐射剂、着色剂分散进低密度聚乙烯（LDPE）树脂中，通过挤出吹塑制成厚0。

Low-density polythene ( LDPE ) resin containing fluorescent auxiliary and colorant was used to make the photo-ecology agricultural film , which was0 .

纽曼帝克集团的执行机构气缸孔打孔机非常适合在LLDPE冲压洞（线性低密度聚乙烯）薄膜。

The Numatics Actuator Group Hole Punch Cylinder is perfect for punching holes in LLDPE ( Linear Density Polyethylene ) film .

利用反应挤出技术制备了低密度聚乙烯（LDPE）/亚甲基丁二酸接枝物。

Grafted material of itaconic acid onto low-density polyethylene ( LDPE ) was prepared by melt reactive extrusion . Synthesis of Poly ( ethylene-succinate )