硅铝合金

X射线荧光法快速测定硅铝合金中的硅含量

The determination of Si in the Al-Si metal by XRFS

机械搅拌对高硅铝合金初生Si形态的影响

Effect of Mechanical Stirring on Primary Silicon Crystals in High-silicon Aluminum Alloy

C3N4涂层刀具在切削淬火钢和硅铝合金中的应用

Application of C_3N_4 Film-coated Cutter to Machine Quenched Steel And Silicon-aluminum Alloy

对熔铸法制备的Si的质量分数大于26%的高硅铝合金锭坯的后续包覆轧制工艺进行了初步研究。

Cladding-rolling for high Si aluminum alloy ingot with a Si mass fraction of higher than 26 % prepared by smelting-casting technology was conducted .

高硅铝合金中加入Bi形成Al-Si-Bi多元合金，具有偏晶转变的结晶特点。

Bi is added into high silica Al-alloy to form multicomponent Al-Si Bi whose crystallization has the character of monotectic transition .

为了进一步扩大Al合金在汽车工业中的应用，研究者们一直在进行新型铝合金材料的研究，尤其是高硅铝合金的发展，已引起人们的广泛重视。

For the further applying of aluminium alloy in automotive industry , the researching of new material of aluminium alloy , especially , the development of high silicon aluminium alloy has drawn much attention .

详细考察了高硅铝合金的微波消解和ICPAES测定条件，经对数个实际样品的检测，方法的分析指标和测试精密度满意。

The optimum conditions of sample digestion and ICP-AES operation were discussed . This method has been applied to the determination of high content silicon in aluminium alloy with satisfactory results .

采用超音速气体雾化法制备快速凝固高硅铝合金粉末，通过热挤压法对雾化合金粉末进行固结成形，并利用T6处理工艺对挤压态合金进行热处理。

The powder is prepared by ultrasonic gas atomization process , consolidated by hot extrusion and T6 temp of the alloy is carried out after extrusion .

通过使用不同刃磨质量的polycrystallinediamond（PCD）刀具车削加工硅铝合金活塞实验，阐述了PCD刀具刃磨质量及几何参数对硅铝合金活塞加工表面粗糙度的影响。

The surface roughness of silicon-aluminum alloy pistons affected by the edge grinding quality and geometry parameters of polycrystalline diamond tools was described by using different PCD tools with different grinding qualities to machine silicon-aluminum alloy pistons .

本文探讨了用PCD槽刀加工硅铝合金活塞环槽存在的成本较高，及在焊接、刃磨等关键工序上易出现的问题，通过试验可降低刀具成本30～50%。

When machining AlSi alloy with PCD ( polycrystalline diamond ) slotted cutter , there used to be high machining cost and welding or sharpening problems . In this papaer discussion is made on the machining technology of PCD slotted cutter .

合理选择PCD刀具的刃磨质量，既能满足加工要求，又能降低刀具刃磨成本，使PCD刀具在加工硅铝合金领域得到了更广泛的应用。

The reasonable choice of the edge-grinding quality of the PCD cutting tool can meet the requirements of the piston manufacture and get lower edge-grinding cost , and make the PCD cutting tool more widely used in the field of machining Si-Al alloy piston .

不同喷射沉积工艺对硅铝合金组织的影响分析

Influence Analysis of Different Spraying Deposition Craft for Si-Al Alloy Texture

碘量法测定高硅铝合金中铜

Iodometric determination of copper in high content silicon - aluminium alloy

高硅铝合金化学氧化化学二氧化锰生产工艺

A new Oxidizing Process of Al Alloy With high Silicon Content

真空包套热挤压高硅铝合金粉末材料的研究

Study of Vacuum Canned Hot Extrusion of High-Si Al Alloy Powder

高硅铝合金初晶硅变质效果的热分析研究

Thermal Analysis on Modification Effect of Primary Silicon in High-Silicon Aluminum Alloys

高硅铝合金压铸孔隙率研究及工艺优化

Study on Porosity and Process Optimization of Hypereutectic Al-Si Alloy Die Casting

铸造高硅铝合金表面微弧氧化陶瓷层的耐磨性

Wear Resistance of Micro Arc Oxidated Ceramic Layer on Cast Si-Al Alloy

高硅铝合金的固体铁粉雾化

Fabrication of High Silicon Aluminum Alloy Powders by Solid Medium Atomization Process

快速凝固高硅铝合金粉末的热挤压过程

Hot extrusion process of rapidly solidified hypereutectic aluminum-silicon alloy powder

其中4004高硅铝合金应用较广泛。

High-silicon aluminum alloy 4004 is used more widely .

熔体温度对高硅铝合金中化合物相的影响

Effect of Melt Temperature on the Compound Phase of High Silicon Aluminum Alloy

高硅铝合金悬浮铸造的组织细化

Structure Refinement of High Si-Al Alloy by Suspension Casting

制备工艺对高硅铝合金的组织及性能的影响

Study of Fabricating Processes on Microstructures and Mechanical Property of High-silicon Aluminum Alloy

金刚石刀具精车硅铝合金的正交试验研究

The Orthogonal Experimental Study on Finish Turning Si-Al Alloy by Using Diamond Tool

喷射沉积耐热高硅铝合金组织及性能

The Microstructures and Mechanical Properties of Spray Deposited Heat Resistant High-Silicon Aluminum Alloy

而使高硅铝合金充分发挥实用价值的关键是细化初晶硅。

The value of hypereutectic Al Si alloys is their fine primary silicon particles .

高硅铝合金活塞顶部硬质阳极氧化

Hard Anodizing Technique for Al-Si Alloy Piston Crown

喷射沉积高硅铝合金的显微组织研究

Research of Microstructure of Spray-deposited High Si-Al Alloy

耐热低膨胀高硅铝合金的成形与性能

Formation and properties of low expansive and heat-resistant aluminum alloy with high silicon content