硅橡胶模具

  • 网络Silicone rubber mold;silicon mould
硅橡胶模具硅橡胶模具
  1. 基于LOM技术的硅橡胶模具技术研究

    Study on the Technology for Silicone Rubber Moulds Based on LOM Technology

  2. 分类分析了从RP原型到硅橡胶模具及树脂制品浇注整个工艺过程的尺寸误差,并给出了相应的改进措施。

    The dimensional errors of the integral process from RP prototype to the silicon rubber mould and casting resin products are classified and analyzed , and the corresponding improvement measures are given .

  3. 通过对化学镀铜的机理,热力学条件、动力学问题的分析与研究,确定了在SLA原型表面和硅橡胶模具表面进行化学镀铜的可行性。

    Pass to the copper-plated mechanism of chemistry , the analysis and studying of thermodynamics condition , motive force knowledge question , has confirmed that carries on the copper-plated feasibility of chemistry on prototype surface of SLA and silicon rubber mould surface .

  4. 硅橡胶模具制作及浇注工艺的探讨

    On manufacturing of silicone rubber mould and the pouring technology

  5. 硅橡胶模具技术的研究现状及展望

    Present status and prospects of the silicone rubber mould technology

  6. 基于快速原型的硅橡胶模具快速制造技术

    Rapid Silicon Tooling Manufacturing Technology and its Application Based on Rapid Prototype

  7. 硅橡胶模具硫化工艺的按需设计

    Required design of mold curing process for silicon rubber

  8. 一种补偿硅橡胶模具收缩的方法研究

    Feasibility Analysis of Magnifying the Size of Prototype to Compensate Shrinkage of Silicone Rubber Mould

  9. 探讨了稀释剂用量与种类对硅橡胶模具质量的影响,并指出二甲基硅油是合适的稀释剂;

    The most suitable thinner might was silicone oil , other thinner minght cause the contraction of mould .

  10. 在此基础上,可以实现硅橡胶模具硫化工艺的按需设计。

    Based on the condition , realized the needed design of the curing process for the silicon rubber curing mold .

  11. 探讨了硅橡胶模具发生膨胀的原因,指出其膨胀的本质是溶剂对硅橡胶的溶胀,并给出了减小溶胀的应对措施。

    The reason of expansion of mould was swelling caused by solvent , the method of reducing such expansion was given .

  12. 本公司秉承质量第一客户至上的宗旨,致力于硅橡胶模具、制品的开发生产。

    The companies adhering to the tenet of quality first , customer supreme , silicone rubber mold , the development and production of products .

  13. 本文主要研究了固化剂、纳米二氧化硅粉和碳酸钙粉等外加剂对硅橡胶模具线收缩率的影响。

    The effects of solidified agent , nanometer silicon dioxide powder and calcium carbonate powder on line contraction percentage of silicon rubber mould were discussed in this paper .

  14. 重点研究了硅橡胶模具的制作工艺及制作中的关键技术,提出了一些能有效地提高模具制作精度和质量的措施。

    The process and key technologies of manufacturing a silicon rubber mould based on RP prototype are investigated , and practical measures and interrelated techniques for improving the accuracy and quality of mould are suggested .

  15. 采用硅橡胶做模具复制珍贵文物

    Duplicate Precious Cultural Relics with Silicious Rubber Die

  16. 最后,设计了硅橡胶硫化模具,试制了非粘合型空间弯曲内嵌式形状记忆合金驱动器样机。

    Using the mold , a non-sticky dimensional-bending embedded shape memory alloy actuator prototype is produced .

  17. 方法以硅橡胶为模具用环氧树脂作为模型主材料,软衬材料制作牙周膜,硫化硅橡胶替代牙槽嵴黏膜,树脂塑料形成基牙外形。

    Methods Epoxy resins were used to make models , periodontal ligament was made of soft materials , mucous membranes were replaced with silicone elastomer and abutments were made of selfcuring acrylic resin .

  18. 我司专门从事硅橡胶产品,包括模具的的设计制造,提供一条龙服务!

    We specializing in Silastic products , including the design and manufacture of components , providing one-stop services !

  19. 分析了硅橡胶硫化过程的主要影响因数,设计了硅橡胶模具硫化工艺规范的优化系统。

    Analyzed the main affecting factors of silicon rubber during the curing period , designed the optimizing system of curing criterion for the silicon rubber mold .