硅烷化

ɡuī wán huà
  • silanizing;siliconize;siliconization;silylanization
硅烷化硅烷化
  1. 硅烷化溶剂对TiO2/Fe-MCM-41复合光催化剂吸附性能的影响

    Effect of Solution in Silylanization on the Adsorbability of TiO_2 / Fe-MCM-41 Composite Photocatalyst

  2. 实验发现在硅烷化处理时,选择不同极性的溶剂对复合光催化剂的吸附性能有显著影响。

    It was found that the polarities of the solvents in the silylanization have great influences on the adsorbability of photocatalyst composite .

  3. 将GC_MS技术和硅烷化反应结合在一起分离、鉴定了番石榴叶乙醇提取物的化学成分。

    The chemical components in the ethanol extract of guava leaves were analyzed by combining GC_MS technique with silylation reactions .

  4. 方法通过对反应过程的监测和产品分析,考察溶剂、硅烷化试剂、催化剂对反应的影响,研究Z、E异构体的反应活性。

    Method The influence of the solvent , silylating reagent and catalyzer to the reaction was probed under the inspection of the reactive process and analysis of products .

  5. Ar/O2低温等离子体处理的高密度聚乙烯(HDPE)膜,和硅烷化玻璃进行粘接。

    High density polyethylene ( HDPE ) films were treated by Ar / O_2 plasma , and adhered to the silanized glass .

  6. 提出了硅烷化试样在测试溶液中的合理等效电路,并对EIS数据进行了拟合。

    A suitable equivalent electrical circuit ( EEC ) for silanized samples was proposed and used throughout the work to fit the EIS data .

  7. 本文研究了溶剂和增强纤维表面硅烷化对RTM石英纤维/酚醛树脂复合材料浸润过程的影响。

    Effects of solvent and fiber modification on the impregnation process of RTM silica / phenolics composites were investigated in this study .

  8. 方法:血浆样品经乙醚-异丙醇(10∶1)提取、硅烷化处理后,选择GC-MS选择性离子和辅助定量离子监测。

    Methods : Perlolyrine in plasma was extracted with ethyl ether & iso-propyl alcohol and determined by means of GC-MS with selected ion and qualifier ion monitoring .

  9. 其中在碱性实验条件下,主要考察了硅烷化试剂的种类、碱度的变化等因素对TS-1分子筛组装的影响。

    Under alkaline conditions , the parameters including the type of the silane reagent , alkalinity changes and other factors were investigated .

  10. 采用三甲基硅烷化分析技术(TMS),研究了粉煤灰机械研磨过程中硅氧四面体结构的变化趋势。

    The changes of silicate tetrahedron of fly ash in the process of mechanical grinding were analyzed by trimetheylsilicane ( TMS ) .

  11. 玻璃经三甲基硅烷化(TMS)反应后,用气相色谱(GLC)和凝胶色谱(GPC)测定可溶性TMS产物的聚合分布;

    Polymeric distribution of soluble trimethylsilylation ( TMS ) derivatives is separated by gas-liquid chromatography ( GLCC ) and gel-permeation chromatography ( GPC );

  12. 对形成的水化硅酸钙经三甲基硅烷化(TMs)反应,并用气相色谱(GLC)及凝胶渗透色谱(GPC)分离和测定TMS衍生物。

    Trimethylsilyl derivatives of calcium silicate hydrates formed in the mixture are separated by gas-liquid chromatography ( OLC ) and gel permeation chromatography ( GPC ) .

  13. 文中的化学共价修饰采用了能够有效控制修饰的APTES硅烷化固定方法,并实现了对于基底膜性质的有效控制。

    The chemical method used in this paper makes use of APTES silanization and realize fully control of the membrane properties .

  14. 窄分布聚苯乙烯在NDG(硅烷化刚性硅胶)柱上,以苯、甲苯、THF和MEK作为淋洗剂时,流体力学体积?[η]和校正的流体力学体积?

    Narrow-distribution polystyrene was eluted on a NDG ( silanized rigid SO2 ) column with benzene , toluene , THF and MEK as the eluants .

  15. 结论EMAO的2′、4〃位的两个羟基硅烷化反应是分步进行的,反应活性EEMAO大于ZEMAO。

    Conclusion The silylating reaction is not proceeding together at 2 ′, 4 ″ - hydroxyl position and the reactivity of E-EMAO is better than that of Z-EMAO .

  16. 色谱条件为10%PEG-2万101白色硅烷化担体,2m×3mm色谱柱,柱温110℃,检测温度130℃。

    The chromatography conditions are : 10 % PEG-20000 on 101 white silanization supporter , 2 m × 3 mm chromatographic column at column temperature of 110 ℃ and detecting temperature being 130 ℃ .

  17. 聚醚端烯丙基化及其硅烷化技术研究羟基硅油改性HTPB型聚氨酯的合成与性能

    Study on the Terminal Allylation and Silylation Technique of Polyether ; Synthesis and performance of polyurethane modified by hydroxyl terminated polysiloxane based on HTPB

  18. 首先将AED产品进行三甲基硅烷化预处理,采用OV-17固定相进行气相色谱分析,以标样和文献对照进行了定性与定量,测定结果可以很好地反映出AEO产品的分子量分布。

    AEO sample was pretreated by trimethyl silanization and analyzed by gas chromatography on OV-17 stationary phase . Identification and quantification were carried out based on standard sample and reference . The result was satisfactory to show the molecular weight distribution of AEO products .

  19. 将涂渍着石油亚砜的硅烷化硅球装于色谱柱中(550mm×14.7mm),在16&40℃时,用0.6M硫氰酸铵洗提样品中的钇,然后用EDTA滴定。

    A column ( 550mm × 14 . 7mm ) of silanized silica sphere coated with petroleum sulfoxide was used , and the Y in the sample was eluted with 0 . 6M NH_4SCN at 16 & 40 ℃ and then titrated with EDTA .

  20. 金属表面硅烷化处理在汽车零部件行业中的应用

    Application of silane treatment of metal surface to automobile parts industry

  21. 用硅烷化双聚体结构分析胶凝物质的聚合趋向

    Analysis on gel polymerization tendency with its dimer structures of silicane derivatives

  22. 位阻型硅烷化试剂在药物合成中的研究与应用

    Application of Organosilan as a Protective Reagent in the Synthesis of Pharmaceuticals

  23. 镁合金表面硅烷化及阴极电泳涂层的研究

    Research on Silane and Cathodic Electrophoretic Coatings on Magnesium Alloys

  24. 三甲基硅烷化测定硅酸钙结构的探讨

    Determination of the structure of calcium silicates by trimethylsilylation method

  25. 硅烷化和多聚赖氨酸化衬底结合容量的比较

    Comparison of Binding Capability between Substrates Modified by Silanized Reagent and Polylysine

  26. 综述了一种新型的金属表面防护处理技术&硅烷化处理的研究现状。

    A novel protective surface treatment of metals by silanization is reviewed .

  27. 硅烷化玻璃表面的X-射线光电子能谱研究

    Studies on Surface of Glass Silanization by X-Ray Photoelectron Spectroscopy

  28. 三甲基硅烷化-气相色谱法研究水玻璃老化机制

    A Study on Waterglass Ageing Mechanism by the Use of TMS-GC Method

  29. 硅烷化可在二小时内完成。

    The silylation can be finished within two hours .

  30. 室温可湿气固化的硅烷化聚醚的研究

    Study of Room Temperature Moisture Curable Silylated Polyether