成型模具
- 网络mold;molding die;M.I.M;RTM;mould
-
以双向顶出脱模机构为特色,对铰链式塑料瓶盖的注射成型模具进行了设计。
By use of special double stripping mechanism , injection mold used for bottle lid joined with a hinge was designed .
-
最后通过注射成型模具定价决策支持及生产周期预测系统软件的开发及实践应用对该预测方法及知识模型进行了验证。
A software system for injection mold quoted price and manufacture cycle estimating were developed and carried out to prove those methods and the integrated model .
-
B级钢轴箱体半固态挤压成型模具的研究
Study on Die of Axle Box Body of B Grade Steel by Semi-Solid Squeeze Forming
-
基于ANSYS的生物质液压成型模具锥角优化
Study of Mold Cone Angle of Hydraulic Briquetting Press Based on ANSYS
-
PVC装饰板挤出成型模具的设计与调试
Design and Test of the Extrusion Tooling for the PVC Decorative Plates
-
还分析了透镜相对孔径(F数)和成型模具等因素对透镜光学效率的影响。
The influences of factor F and modeling plate on the lens'optical efficiency are also analyzed .
-
塑料型材挤出成型模具CAPP系统的开发
Development of CAPP System for Extrusion Die of Plastic Profile
-
CAE塑料注射成型模具设计方法的应用研究
Application Research on CAE Design Method for Plastic Injection Molding
-
利用CAE确定精密注塑成型模具的型腔尺寸
Calculating Cavity Dimensions of Precise Injection Mold by CAE
-
塑料成型模具Ni-P合金化学镀表面强化
Electroless Ni-P Alloy Used for Strengthening the Surface of Plastic-formed Mould
-
Ni-P化学镀在塑料成型模具表面强化上的应用
Application of Electroless Plating Ni-P Alloy on Strengthen the Plastics Mould Surface
-
Top-Down方法在成型模具设计中的应用
Application of the top-down method in the mould design
-
介绍ABS圆盒盖单浇口热流道注射成型模具,进行了注射成型试验。
This paper introduces the design of the single-gate injection mold for ABS caps with hot runner .
-
基于UG的三棱锥袋式包装机成型模具运动仿真
Kinematic Simulation of Shaping Molds of Pyramid Shaped Teabag Packaging Machine Based on UG
-
基于UG的一种无纺布锥形口罩冲压成型模具设计
Stamping Die Design of the Cone - shaped Non-woven Fabric Mask Based on UG
-
阐述了CAE模拟技术在气体辅助注射成型模具设计过程中的重要意义;
The CAE technology is very important in the design of the gas assisted injection mold .
-
高温玻璃成型模具GY钢的研制
The Development of the Die Steel for Glass Mould ing at High Temperature
-
试评现今成型模具电火花加工的脉冲电源EDM放电位置在线检测的电位差法研究
TODAY 'S EDM PULSE GENERATORS FOR DIE-MAKING Study on On Line Detection of EDM Spark Locations by Potential Difference
-
RTM成型模具的热平衡设计
Thermal balance design of RTM mould
-
介绍了塑料注射成型模具CAD软件中变量装配的关键技术,并给出了装配设计中几何约束和工程约束实例。
The key technology of variable assemble in CAD software for plastic injection mold is introduced . Examples of the geometry restrains and the engineering restrain in the assemble design are given .
-
抽屉滑轨成型模具的Ni-W(D)合金电刷镀修复
Repairing of Drawer Glide Shapeable Mould by Brush Plating Ni-W ( D ) Alloy Layer
-
UHMW-PE气辅挤出成型模具的设计开发
Design and Development of Air-assist Extrusion Die of UHMW-PE Material
-
论文以新开发的可视电话产品外壳为研究对象,采用注塑模CAE技术与遗传算法相结合的方法优化设计注塑成型模具的结构。
The injection mold structure is optimized by combination of CAE and Genetic Algorithm ( GA ) . Possible injection defectiveness of new developed videophone shell is predicted .
-
介绍了冰箱压缩机底座消失模铸造生产中所用的EPS发泡件成型模具的设计过程、结构特点和使用方法。
The designing process , structure characteristics and operating method of the EPS foaming mould used in the lost foam casting production of the compressor pedestal were introduced .
-
介绍了SolidWorks2001在塑料成型模具设计中的应用,并通过二次开发SolidWorks2001建立了模具标准零件库,对三维CAD技术在塑料成型模具产品开发过程中的应用作了有益的尝试和探索。
The application of SolidWorks 2001 in plastics formation mould design is introduced . Mould standard parts storage is built through developing to SolidWorks 2001 software again . The profitable trial and research for the application of 3D CAD technology are taken in mould development of plastics formation .
-
新型砂轮成型模具钢(JK3)研究
Die and Mould Technology Study on New Tool Steel ( JK3 ) for Making Grinding Die
-
实际应用表明:Co-W合金镀层应用于轿车连杆成型模具上,提高其寿命1.8倍以上;
The application of the Co-W alloy coating indicated that the coating on automobile rod die increases the service life by 1.8 times ;
-
对UPVC管材挤出成型模具的工作原理、设计原则、主要设计参数的确定、结构特点及关键部件进行了理论分析,并结合生产实践中取得的经验加以改进。
Working principle , design principle , determination of key design parameters , structural characteristics and key components of mould for extrution moulding UPVC tubing ares analyzed in principle , and improvements are made based on production experiences .
-
尾砂型料压制成型模具的研究和设计
Research and Design of Pressed Forming Mold by Sand Shaped Tailings
-
成型模具对半固态铝合金组织的影响
Effect of Different Die Material on Microstructure of Semi-solid Aluminium Alloy