失效模式分析

  • 网络failure mode analysis;fmea;dfmea;PFMEA
失效模式分析失效模式分析
  1. 失效模式分析在偏转线圈设计开发中的应用

    FMEA Application in the Deflection Yoke Design and Development

  2. 汶川地震中都江堰市房屋建筑失效模式分析

    Failure mode analysis of buildings in Dujiangyan in Wenchuan earthquake

  3. 方钢管混凝土桁架K形节点失效模式分析研究

    Analysis of the failure mode on the K-joints of concrete-fi lled steel rectangular tubular truss structure

  4. 一种VRLA蓄电池的电性能试验及失效模式分析

    Research on the Electrochemical Performance and Failure Mode of a VRLA Battery

  5. APU失效模式分析与维修方案优化研究

    Analysis of APU Failure Pattern and Study on Maintenance Programme Optimization

  6. 车用CNG全复合材料气瓶的失效模式分析及预防

    Analyze on Failure Mode of All Composite Cylinder for the On-board Storage of Natural Gas as a Fuel for Automotive Vehicle

  7. 摩托车发动机轴承早期失效模式分析及对策

    An Analysis of Earlier Failure of Motorcycle Engine Bearing and Countermeasures

  8. 基于故障数据统计的电磁流量计失效模式分析

    Failure Modes Analysis of Electromagnetic Flowmeter Based on Failure Data Statistics

  9. 基于失效模式分析的供电可靠性风险分析

    Power Supply Reliability Venture Analysis Based on Failure Mode Analysis

  10. 电站控保设备机械性失效模式分析及其对策

    Mechanical Failure Modes Analyses and Countermeasure for Powe Control and Protection Devices

  11. 集成电路陶瓷外壳析出物失效模式分析

    An Analysis on Failure Mode Induced by Educts from Ceramic IC Packages

  12. 立体车库钢结构失效模式分析简化模拟及失效准则

    Simplified Simulation and Failure Criterion of Failure Mode Analysis for Space Parking System

  13. 采用失效模式分析和安全意识的设计和制造。

    Design and fabrication with FMEA and Safety protection .

  14. 失效模式分析是进行可靠性设计的重要环节。

    The analysis of fallure model is an important link in reliability design .

  15. 大型钢结构系统广义强度失效模式分析方法研究

    Research on analysis method of generalized strength failure model for steel structure system

  16. 在役工艺塔失效模式分析

    Failure Mode Analysis for Processing Tower in Use

  17. 超高层巨型钢框架结构失效模式分析

    Failure Mode Analysis of Huge Steel Frame Structures

  18. 活塞环失效模式分析

    Analysis on Failure Mode for Piston Ring

  19. 舱内爆炸载荷及舱室板架结构的失效模式分析

    Study on the blast load and failure mode of ship structure subject to internal explosion

  20. 熟练掌握失效模式分析方法,矫正预防措施及量测分析技巧。

    Good command of the method of fault analysis , faultfinding , correction and measurements testing .

  21. 爆炸载荷作用下加筋板的失效模式分析及结构优化设计

    Study on failure mode of stiffened plate and optimized design of structure subjected to blast load

  22. 汽车零件中几种典型运动副磨损失效模式分析

    Analysis of the Paterns of Invalidity Caused by the Wear on Some Pairs of Parts in Automobiles

  23. 变压器更新工程;失效模式分析;不可用率计算;风险差;投资回收期法。

    Transformer update project , failure modes analysis unavailability calculation , risk difference , payback period method .

  24. 气门失效模式分析

    Valve Inefficiency Mode Analysis

  25. 铁塔的失效模式分析的结果与实际倒塔情况相吻合。

    The numerical results of failure modes analysis were consistent with the conclusion given by the accident investigation report .

  26. 通过对重要安全系统及部件故障和失效模式分析,建立了这些系统的可靠性分析模型。

    The safety systems are modeled by the Failure Mode and Effective Analysis ( FMEA ) and the fault tree method .

  27. 摘要为了降低产品研发的风险,特别是大型复杂产品的研发,必须进行失效模式分析。

    The failure pattern analysis must be conducted for the sake of reducing the risk of developing products especially the development of large scaled complex products .

  28. 在开展军用集成电路失效模式分析和改进措施研究的工程应用中,建立了军用集成电路数据库,为建立其典型的失效模式提供参考。

    In the course of analyzing failure model of MICs and applying measures , data base of MICs is set up providing references gived for building the typic failure model .

  29. 为了有效地降低新产品研发的风险,提高产品可靠性,必须进行失效模式分析,但大型复杂产品的系统复杂性,给全面分析失效模式的影响和原因带来困难。

    The failure modes and effects analysis should be done in order to reduce the developing risk and improve the reliability of products . Complexity of the large-scale complex products causes this comprehensive analysis difficult .

  30. 本文以基于失效模式分析的结构设计理念为基础,从结构稳定性的基本概念原理出发,给出了控制失效模式的结构稳定性设计的一般流程。

    On the basis of the structural design idea based on failure mode analysis , beginning with the basic concepts and principles of structural stability , the paper expounds the general flow of structural stability design based on failure mode dominated .