龙门刨床

变频调速器和PLC在龙门刨床上的应用

Inverter and PLC Applied to Improvement of Double Housing Planer

本文介绍了用PC改造四米龙门刨床工作台的自动循环，点动前进和点动后退，自动进刀和退刀等功能的交流控制系统。

The AC control system of the 4m planer is retrofitted with PC for table automatic cycle , jogging forward and jogging backward , automatic feed and withdraw .

PLC及直流调速系统在龙门刨床中的应用

Application of PLC and DC Speed Adjustment in Double-housing Facing Machine

基于PLC和变频器的龙门刨床改造

The Improvement of Double housing Planner Based on PLC and Frequency Converter

用PLC控制龙门刨床交流变频无级调速系统

PLC Controlled AC Variable-Frequency Stepless Speed Control System for Planer

PWM整流技术在龙门刨床上的应用

Application of PWM Rectification Technology on Double Housing Planer

反电势校正环在龙门刨床SCR控制系统中的应用

Application of electric potential correcting ring to SCR system of plane milling machines

针对龙门刨床的主拖动系统，提出将模糊自适应PID控制用于直流调速系统的方法。

This paper proposes the application of fuzzy adaptive PID control in DC adjustment speed system aiming at advocate-drag system of dragon-planer .

4m龙门刨床自适应控制系统研究

Research on Adaptive Control System of a 4m Gantry Planning Machine

用全数字式直流控制系统改造6m龙门刨床

Reformation of 6M Table Planing Machine with Full Digital DC Control System

电梯导轨加工工艺研究及对6m龙门刨床的改造设计

Research on Process Analysis of Machining Elevator-Guideway and Reform in Planner Design

本文对B2020A/1龙门刨床V型导轨面局部磨损故障产生的原因，应用铁谱技术进行了详细分析。

This paper analysed the cause of B2020A / 1 table planer 's V mode track wear and tear , applied iron spectrometer technology to analyse in detail .

论文以立式车床和龙门刨床的数控化改造为背景，概述了机床数控化改造的设计方案与应用技术，并对PLC的发展与应用作了简要介绍。

The paper summarize the design project and application technology in machine numeric control system , and introduce the PLC development and application in simply , by the machine numeric control system reconstructive .

用KBS电柜改造龙门刨床

The reform of planer with KBS power cabinet

分析了龙门刨床的运动特点，介绍了利用变频器结合PLC对龙门刨床进行自动化改造的可行性及实现方法，以提高其加工效率与精度。

The paper analyzes the features of motor of a planer . Feasibility and method combining transducer with PLC to improve motion system of a planer are presented , improving its efficiency and precision .

基于西门子M4控制器的A系列龙门刨床主拖动系统技术设计

Technical Design of a Series Gantry Planer Main Driving System Based on Siemens M4 Controller

在G-M系统和变频调速系统进行比较的基础上，介绍了基于PLC、变频器的B2012A型龙门刨床主拖动系统的改造。

Based on the G-M system contrast to the system of frequency conversion , the paper introduces the improvement of advocate-drag system of dragon-planer of transducer of B2012A and PLC .

本文针对龙门刨床机械式进刀量控制机构的结构特点，采用PLC为主控制器，以变频器作为控制电源，结合变速箱传动机构，研制了一种龙门刨床刀架自动进给控制系统。

With the double housing planer mechanical feed control characteristics , this paper developed one kind of automatic feed control system of double housing planer combined with PLC controller and converter control power supply and gear-box drive .

设计了适用于BQ2010轻型龙门刨床工作台的交流变频拖动及其PLC控制系统。

An AC variable frequency drive and PLC-control system for the worktable of light-duty double housing planer of BQ2010 was designed .

龙门刨床工作台具有往复运动，频繁换向的工作状态，这就要求PC具有较高的抗干扰能力和L作可靠性。

The table of planer has the working condition of reciprocating motion and frequent changing directions , so that the PC must have higher interference immunity and reliability .

龙门刨床的主拖动采用调速范围宽、节能效果显著的变频器，用PLC（可编程序控制器）实现开关量逻辑控制和变频电动机的转速控制。

The main drive of planer utilizes converter , for it has a wide speed regulation range and well effect in energy saving . The planer utilizes PLC to achieve the logic control , and to control the speed of converter motor .

在分析和研究龙门刨（B2012A）原控制系统的基础上，设计了龙门刨床反电动势反馈控制系统。

Base on the analysis and research of the original control systemof double housing planer ( B2-012A ), designed a opposing electromotance feedback control system .

在分析和研究ED-225G日本龙门刨原控制系统的基础上，根据目前设备的机械及电气性能的特殊要求，设计了龙门刨床基于PLC控制、全数字直流调速系统控制床身驱动的电气系统。

Analysis and research in Japan planer ED-225G , based on the original control system , based on current equipment , mechanical and electrical properties of the special requirements , design Planer PLC-based control , all-digital DC speed control system bed electrical drive system .

通过龙门刨床加装铣削功能的技术改进，制造成为新型（GBX2016A）龙门刨铣床，增加了使用功能和使用价值。

By technological innovation of increasing milling function on portal planer , GBX2016A portal planing and milling machine is made , which increases machining function and usage value .

在分析和研究龙门刨床（B2012A）原控制系统的基础上，根据厂方现场生产工艺的特殊要求，设计了龙门刨床全数字直流调速系统。

Base on the analysis and research of the original control system of double housing planer ( B2012A ), according to its special technics , designed a digital direct current speed control system .

用矢量变频技术改造龙门刨床工作台拖动系统

Reform table driving system of double-housing planer with vector converter technology

龙门刨床交流变频无级调速系统

A variable frequency speed control system of the double housing planer

龙门刨床平面定位可调定位夹具的设计

The Design of an Adjustable Plane Alignment Positioning Fixture for Planer

龙门刨床是一种常用的大型机械加工设备。

Closed planer is one of commonly used large machining equipment .

龙门刨床全数字直流调速系统

Full Digital Direct Current Thyristor Speed Control Equipment for Planer