馈线终端

重点探讨了该馈线终端的工作原理，系统构成及软件设计思路。

Working principle , systemhardware composing , and software design method of this FTU is discussed in detail .

基于配电网系统保护的馈线终端

Feeder Terminal Unit Based on System Protection to Distribution Network

基于DSP的馈线终端装置FTU的设计与实现

Design and Realization of Feeder Terminal Unit Based on DSP

馈线终端单元（FTU）是配电网馈线自动化系统的主要装置，101规约则是我国电力行业标准。

FTU is the main equipment of feeding system in the distribution network , and 101 protocol is the criterion in our country .

基于配电网系统保护原理，研制了一种新型馈线终端单元（FTU）。

Based on the system protection principle to distribution network , a new type of feeder terminal unit ( FTU ) is developed .

分别针对得到的馈线终端设备（FTU）方向过流信息不完备及信息畸变这2种情况给出了解决对策：当故障信息不完备时，不考虑对应节点信息即可；

As for the circumstances of incomplete or distorted FTU directed over-current information , solutions are given for each case . The first problem can be solved by ignoring the node with unknown information .

针对系统规模大、现场设备多、运行方式变化复杂的特点，将部分功能下移到远动终端装置（RTU）、馈线终端装置（FTU），从而减轻主站的负担。

For large system with more devices and operation patterns , part of the functions is implemented in RTU ( Remote Terminal Unit ) and FTU ( Feeder Terminal Unit ) to mitigate the load of main station .

针对多分段、多连接和多供电途径的网格架空配电网的自动化系统，提出了一套馈线终端单元（FTU）重合闸控制策略。

For the distribution automation ( DA ) for the overhead lattice distribution network with multi sections , multi connections and multi power sources a reclosing control method of Feeder Terminal Unit ( FTU ) is put forward .

实施配电自动化是电力系统现代化的必然趋势，基于馈线终端单元FTU的馈线自动化是我国目前实施配电自动化的主要方式。

Carrying distribution automation into effect is an inevitable trend of power system modernization . Nowadays , feeder automation based on Feeder Terminal Unit ( FTU ) is a mainly used method in distribution automation in our country .

配电自动化馈线终端的信息采集与通信规约

Data collection and communication protocol of feeder terminal unit in distribution automation

配网馈线终端单元的研制

The Development of Feeder Terminal Unit for Distribution Network

基于数字信号处理和μC/OS-Ⅱ的馈线终端设备设计方案

Design and Research of FTU Based on DSP and μ C / OS-II

综合型馈线终端单元的设计与实现

Design and Realization of A Comprehensive Feeder Terminal Unit

低功耗馈线终端负荷开关的研究馈线自动化技术

Exploration of Low Power Consumption Techniques for Load Interrupter Switches on Feed Line Terminals FEEDER AUTOMATION

介绍一种基于CAN总线和交流同步采样技术的新型智能馈线终端。

This article introduce a new style FTU based on CAN bus and synchronized sampling technology .

还开发了串口通信接口以及馈线终端模块，实现通信接口与馈线终端模块的数据传输。

GPRS communication interface based on secondary development , serial communication interface and feeder terminal modules are developed in the form of dynamic link library achieving data transmission between communication interfaces and feeder terminal modules .

基于DSP的馈线远方终端的研究

Study of Feeder Terminal Unit Based on DSP

基于ARM7处理器的馈线自动化终端研制

The Development of FTU Based on ARM7 Processor

本文首先概述了配电自动化系统的组成及其发展趋势以及馈线自动化终端单元（FTU）在系统中所起到的作用。

This dissertation will present the structure and development of Distribution Automation System and the function of Feeder Terminal Unit ( FTU ) .

当馈线远方终端（FTU）拒动或通讯中断时，变电站馈出线的保护可作为远后备。

When feeder terminal unit ( FTU ) fails to act or communicate is interrupted , the feeder protection in the substation can backup .

规约转换在馈线远动终端中的实现方法

Implementation Approach of Protocol Converter in Feeder Terminal Unit

基于双处理器的馈线远方终端的研制

The Development of Feeder Terminal Unit Based on Dual-CPU

配电自动化系统中一种馈线配电终端的设计与实现

Design and Implementation of an Embedded Intelligent 10 kV Feeder Distribution Terminal Unit

远程馈线智能终端单元的研制

Development of remote feeder terminal intelligent unit

馈线自动化终端单元的研究

Study on Feeder Automation Terminal Unit

在保证实时性的前提下，研究了馈线远方终端的系统级低功耗设计方法。

A system level low power design technique for feeder terminal unit ( FTU ) is investigated while satisfying the real-time constraints .

配电自动化是保证供电可靠性和提高供电质量的重要手段，而馈线自动化远方终端（FTU）是整个系统的基础控制单元，对于实现馈线自动化乃至配电自动化起着十分重要的作用。

Serve as the base control unit , FTU ( Feed Terminal Unit ) play an important role in the reality of Electric Automation to ensure power supply and quality .

馈线自动化远方终端控制器的设计

Design of the Remote Terminal Controller for Feeder Automation

智能型馈线远方测控终端设备的研究

Research of an Intelligent Feeder Terminal Unit Integrated with Measurement and Control Functions

本文馈线自动化远方终端控制器在设计上，考虑了用于联络开关和分段的通用性，硬件设计具有灵活性、实用性等特点；

In the controller design , the universality suitable for both interconnection and section switches has been considered .