镀锌

Mn在彩色热镀锌中的作用

The Effect of Mn on Coloring Hot Dip Galvanization

在热镀锌行业中，应用偶氮氯膦Ⅲ分光光度法，在721型分光光度计上、675μm波长处测定Zn－Al－Mg－Re四元合金及锌液中稀土总量。

In the hot-dip galvanization sector , the four-element alloy , i. e , Zn-Al-Mg-Re and total amount of rare earths in zinc solution can be measured at 675 μ m wave length with Type 721 Spectrophotometer by employing azo Cl-P ⅲ spectrophotometry .

那儿的普通话听起来犹如带锯割镀锌筒一样。

Common speech there sounds like a band saw cutting galvanized tin .

镀锌层对钢板r值的影响

Effect of Galvanized Coating on r - Value of Sheets

大跨度桥梁用低松弛镀锌PC钢绞线的生产

The Manufacture of Low Relaxation Prestressed Galvanized PC Steel Strand for Wide Span Bridge

静态粉末法的测定结果表明：气相缓蚀剂N对镀锌钢板有明显的缓蚀效果。

The vapor phase inhibitor N is obviously effective for the galvanized steel sheet by testing with static powder method .

通过实验研究了溶液pH值对钾盐镀锌液的阴极电流效率、分散能力、镀锌层的外观的影响。

Effect of pH value on cathode current efficiency , dispersibility and so on was studied in this paper .

添加Ni及Al元素改善热镀锌件表面质量及耐蚀性的研究

Research on Improving Surface Qualities and Erosion Resistance of the Hot-galvanized Materials with the Additions of Ni and Al

CSP板卷及冷轧镀锌板表面缺陷分析

Surface Defects of CSP Strip , Sheets From Cold Rolled and Galvanized Strip

HDPE及优质镀锌钢钉。

HDPE with zinc coated steel nail .

对圆型和S（Z）型绕包镀锌钢丝主要技术参数进行对比，并给出生产工艺和技术要求。

Main technology parameters between round and S ( Z ) type winding package steel wire are compared , production process and technology requirement are given .

采用冷金属过渡方法（CMT）对铝和镀锌钢板异种材料进行了熔钎焊连接。

Welding-brazing experiment of aluminum and galvanized steel was conducted with cold metal transfer method .

介绍PLC控制系统在欠氧燃烧状态下冷轧镀锌薄板加热炉的双交叉限幅控制方式中应用，给出了控制框图、交叉限幅计算公式及实际使用效果。

This article describes , application of PLC control system in double crossing limit range control mode of cold mill galvanization sheet metal heating furnace in burning status of lack of oxygen .

汽车用热镀锌板Fe-Al合金层的研究

Study on Fe - Al Alloy Layer in Hot - Dipping Galvanized Steel Sheet for Cars

应用掠射式椭圆偏振技术（掠射椭偏术）和循环伏安法对以泡沫镍为基体的表面镀锌电极在碱性电解质（KOH）中的电化学行为进行了研究。

Electrochemical performance of zinc-plated foam nickel electrode in alkaline solution ( KOH ) was stu-died by grazing ellipsometry and cyclic voltammetry .

在大量搜集现场生产数据的基础上，用BP神经网络算法建立了各种工艺参数对热镀锌板力学性能影响的数学模型。

Based on collected production data , a predictive model to express the relationship between the mechanical properties of hot dip galvanized sheet and varied technological parameters has been developed by means of BP artificial neural network algorithm .

大跨度桥梁采用低松弛镀锌PC钢绞线具有施工简便、造价低等优点。介绍九江钢铁公司生产的低松弛镀锌PC钢绞线产品的生产工艺、制造过程及有关技术要点。

Its profits are convenient construction and low cost that the wide span bridge is built by the low relaxation prestressed galvanized PC steel strand . To introduce the technology of production , manufacturing operation and the relevant main points of technology .

为改善精铸管接件的镀锌钝化质量，对其采用的锌酸盐镀锌工艺进行了整改和维护，同时应用了CS封闭剂。

In order to improve galvanizing passivation quality of precise cast pipe connecting parts , some modifications and maintenances of zincate plating technology are carried out and at the same time , CS is also applied .

应用线性扫描伏安法和微分电容法研究了锌酸盐镀锌中四乙烯五胺（tetren）对Zn（OH）4~（2-）放电步骤的阻化和催化作用。

The inhibition and catalysis effects of tetren on discharge of Zn ( OH ) 42 - in alkaline zincate bath have been studied by means of voltammetry and differential capacity measurement .

BDZ型氯化物光亮镀锌的研究

Research about the Bright Zinc-plating of BDZ Type Chloride

4×25Fi高强度镀锌钢丝绳生产

Production of 4 × 25Fi High Strength Galvanized Steel Wire Rope

用BZ11添加剂的氯化钾全光亮镀锌

Full Bright Zinc Plating Using Potassium Chloride Bath with Additive BZ-11

Zn-ISX净化碱性镀锌液的条件试验

Study on the Purification of Alkaline Zinc Plating Bath with Zn-ISX

在收集大量现场数据的基础上，运用BP神经网络算法，建立了退火处理各工艺参数对热镀锌过渡卷力学性能影响的数学模型，并与线性回归模型相比较。

Based on a lot of collected data on-site , with algorithm of BP artificial neural net , a mathematical model for effect of technological parameters for annealing treatment on mechanical properties of hot dip galvanized strip has been developed and compared with the multi-variant linear regression model .

利用CO2激光对汽车车身用1.5mm厚高强度双面镀锌钢进行了大量的焊接实验，对焊缝组织进行了显微组织分析和相关的机械性能实验。

Based on many experiments of CO_2 laser welding of 1.5 mm zinc coated high strength steel to vehicle body , joint microstructure and stress-strain curve of specimen are acquired . Using T.

介绍宝钢1800mm连续热镀锌机组的生产工艺、设备组成及工艺流程。

The article describes the process , composition and sequence of Baoshan Steel 1800 mm Continuous Hot Galvanizing line .

通过试验分析了不同的光整工艺对热镀锌板屈服强度、n值和表面质量的影响，由此提出了CQ、DQ级低碳铝镇静钢和IF钢优化的光整工艺。

The influence of skin pass process on yield strength , n value and surface quality of hot-dipped galvanized sheet steel were analyzed by experiments . Meanwhile , the optimized skin pass processes for CQ , DQ and IF steel were obtained .

研究结果表明：在同轴和侧吹保护气体的条件下，激光深熔焊接能有效地避免高强度镀锌钢热影响区（HAZ）的软化，控制焊缝气孔及焊接接头裂纹的产生。

The experimental result indicates that deep penetration laser welding can effectively avoid softening HAZ , control the gas hole and restrain joint flaw of welding of zinc coated high strength steel by blowing coaxial and side protective gas .

本文介绍的NDZ-1、NDZ-2高浊点、宽温度氯化钾、氯化铵光亮镀锌工艺，解决了目前国内氯化物镀锌添加剂的一些技术难题。

In this paper are introduced high cloud point and wide-temperature NDZ-1 potassium chloride and NDZ-2 ammonium chloride bright zinc-plating technology .

LaLouviere的项目同时包括了十分关键的一套酸洗连轧联合机组，一套新型的镀锌生产线，两条彩涂线和一台可逆式冷轧机的改造。

The project La Louviere consists equally of a coupled pickle-tandem mill as key part , and in addition of a new galvanization line , two new painting lines and the revamp of a reversible cold rolling mill .