链轮

基于UG的刮板输送机链轮三维参数化建模

The 3D Parametric Modeling of Chain Wheel of Flight Bar Conveyor Based on UG

本文采用计算机辅助编程（CAP）及计算机辅助制造（CAM）的方法，对工业领域中应用广泛的套筒滚子链链轮进行了自动编程和数控加工。

The method of automatic programming and computer aided manufacturing has been used to make a chain wheel with numerical control mill in this article .

面向对象的盘形链轮铣刀CAD系统的开发

Development of Object-oriented CAD System for Disk Cutter of Sprocket Wheel

椭圆链轮的NC加工与计算机辅助编程

Numerical control machining and computer aidded programming for elliptical sprocket manufacturing

基于Solidedge的链轮滚刀加工刀具刃形的精确设计与加工

Solid Edge-based Accurate Design and Manufacture of edge shape of Cutters Used to Machine Sprocket Wheel Hobs

渐开线链轮CAD与加工仿真

CAD and Machining Simulation of Involute Sprockets

渐开线链轮CAD软件给出了传动用齿形链各种节距下的渐开线链轮的二维图形以及加工仿真过程。

2-D drawings of involutes sprockets and machined process were given in the software of involutes sprockets .

基于PLC的圆环链链轮链窝加工专用数控系统研究

Development of Numerical Control System for Processing the Hoisting Coil Chain Wheel 's Chain Pit Based on PLC

基于SolidWorks的链轮滚刀精铲刀的设计与加工

SolidWorks-based Designing and Machining of Precise Relieving Cutter for Sprocket Hob

在VB中编程调用AutoCAD获得修正后的链轮渐开线齿形。

The modified involute profile is obtained by use of a unified program between VB and AutoCAD .

本文介绍滚子链传动CAD系统的程序设计，以及链轮零件图绘制等内容。

This paper introduces the program desks of the roller chain drive CAD system and the drawing of the chain wheels ' part drawings and so on .

本文是对齿轮滚刀、蜗轮滚刀、花键滚刀、链轮滚刀四种不同类型滚刀进行统一设计并开发统一的CAD系统。

This article unified the design of gear hob , worm gear hob . spline hob , sprocket hob four different types of hob and development of integrated CAD system .

通过对实际铸件的取样显微观察分析，并利用数值模拟软件FTStar对链轮进行了凝固模拟计算，断定缺陷大多是缩孔和缩松。

Shrinkage cavity and micro shrinkage porosity have been decided to be such defect through sampling from sprocket gear casting and micro examination analysis and application of FT Star in solidification simulation .

阐述了链轮齿数、链轮椭圆度与链传动中心距对瞬时传动比的影响，并在AutoCAD上显示、输出了相应的变化曲线。

The effects of number of teeth , ovality of sprocket and central distance of chain drive on instantaneous ratio was also expounded , and the varying curves were shown and exported using AutoCAD .

原RH真空室烘烤装置升降小车采用齿轮齿条传动方式或链轮链条传动方式，都曾多次发生事故，改用液压推杆&链条传动方式后使用效果很好。

Many accidents occur on the original rise-fall vehicles of the roast device in RH vacuum chamber , these vehicles used gear-rack drive or sprocket-chain drive . But better effect can be brought by using hydraulic rod-chain drive .

锥套（TaperLockBushes）联接是利用锥面的楔形作用实现轴和轮毂的联接，它适用于三角带轮、平皮带轮、同步齿形带轮、链轮、联轴器等部件与轴之间的联接。

Taper Lock Bushes coupling is using the conical cuniform function to couple the axis and hub , which is applied in the coupling between axis and triangle pulley , flat pulley , synchronization gear , chain wheel , clutch .

在链轮硬度与有效硬化层深度达到技术要求的情况下，UCONA型水溶性淬火介质使铁基粉末冶金链轮感应淬火冷却时的应力降到最小，从而把淬火开裂比例控制在1%以内。

On condition that the sprocket ′ s hardness and effective hardening case depth meets the technical requirements , UCON A quenchant can minimize the PM sprocket ′ s induction quenching stress , and hence control the quenching crack rate within 1 % .

介绍了机油泵驱动链轮和从动链轮的研制过程和使用选用Fe-C-Cu-Mo系材料及自动压机生产的链轮具有性能好、精度高等特点。

The research , manufacture and performance efficient of the driving and driven chain wheels for oil pump were introduced . The chain wheels from Fe-C-Cu-Mo series materials and made by automatic press exhibit good performance , high precision and other features .

分别从齿形链和链轮啮合的理论基础、齿形链与链轮的正确啮合条件、啮合就位时围链节距增量计算等几方面研究了圆形基准孔Hy-Vo齿形链的啮合设计机理。

The author studies the meshing design mechanisms of the rotundity-datum-aperture Hy-Vo silent chain from several different aspects such as the meshing theoretical basis of silent chain and sprocket , the correct meshing condition between silent chain and sprocket , and the incremental calculation of correct meshing round-chain pitch .

摩托车链轮螺栓的失效分析和工艺改进

Failure analysis on motorcycle chain wheel bolt and the improving measure

链轮主轴是自动扶梯的重要传动元件。

Sprocket spindle is an important transmission component for an escalator .

汽车发动机用温压粉末冶金链轮的开发

Development of Warm Compacted P / M Sprockets for Automotive Engines

链锯链轮设计计算理论的研究

A study on the chain saw chain sprocket design and calculation

绕出驱动链轮处刮板输送链张力计算

Calculation of slack-side tension of unloaded scraper chain at driving sprocket

检查链轮中是否安装有摩擦片。

Check that the friction plate is fitted in the sprocket .

链干机链轮的计算机辅助编程及制造

Computer Aided Programming and Manufacturing of Chain Wheel of Chain Dryer

因为他的自行车有链轮，所以打架的名字就叫链轮。

It 's his fighting name'cause his bike has a sprocket .

链轮滚刀基准齿条齿距系数的优选

The Optimization of the Basic Rack Pitch Coefficient in Sprocket Hobs

SGB320/17型刮板机头部链轮组件的改造

Reform of Nose Chain Wheel Package in SGB320 / 17 Scraper

齿形链和渐开线齿形链轮的啮合设计

The engagement of tooth shaped chains and involute tooth formed sprockets