钼合金

为改进钼合金板材轧制工艺提供了科学数据。

Some scientific data are provided for improving the rolling process technology of TZM alloy sheets .

介绍了获得纯净铁水的熔炼方法、铁水的球化处理方法及球化剂的配比、孕育处理方法、铜与钼合金的配合使用方法等。

Melting methods for pure molten iron , spheroidizing treatment methods of molten iron , proportioning method of nodulizer , inoculating treatment methods , matching usage of copper and molybdenum alloy , etc. are introduced in detail .

微量Al、Si、K掺杂钼合金材等的性能及应用

The Properties and Applications of The Doped Mo With The Trace Al , Si and K

稀土La对钼合金组织和性能的影响

Effect of La on microstructure and mechanical property of Mo-alloy

ICP-AES法测定钼合金中的镧元素

Determination of La in Molybdenum Alloy by ICP-AES

介绍采用A-1添加剂进行黑镍（镍钼合金）电镀的简便工艺。

A simple technology applying A-1 additive to Ni-Mo alloy plating is introduced in this article .

哈氏B-3镍钼合金的特性和容器制造工艺特点

Hastelloy B-3 Nickel-Molybdenum Alloy Properties and Its Fabrication Technology for Vessel

介绍了以DTPA为螯合剂，采用螯合滴定法测定镍钼合金镀层和镀液中的钼含量。结果表明，该方法准确度高，具有实用价值。

Determination of molybdenum in both Ni-Mo alloy deposit and plating solution using DTPA as chelating agent was described with high accurate results .

TZM合金是目前广泛应用、性能优良的工业钼合金。

TZM alloy is a commercial molybdenum alloy with superior properties which is widely used at present .

通过比较不同的铁族金属与钼合金电极在30%KOH溶液中的催化性能，表明在Ni-Fe-Mo三元合金中引入Co能进一步提高合金的催化活性。

The catalytic activity of the different alloys in 30 % KOH solution indicated that the catalytic activity of Ni-Fe-Mo alloy was improved by adding Co it .

实验结果表明，含Hf钼合金在800℃离子氮化效果好，元素Hf能明显促进钼合金的离子氮化过程，增加了表面化合物层和硬化区的深度，提高了表面层硬度。

The experimental results have shown that the right temperature of ionitriding is 800 ℃ in Hf-molybdenum alloy , element Hf improves ionitriding process , promotes thickness of surface compound layer and hardening zone , and increases surface hardness obviously .

在TZM钼合金的基础上，通过复合添加稀土Y、Ce的试验，生产出了高温性能优异且工艺易于控制的钼合金。

Based on TZM molybdenum alloy , new alloys can be produced by addition of cerium , which have the excellent high temperature properties , meanwhile , process can be controlled more easily .

方法用等离子喷涂技术，将表面分别喷涂HA和钴铬钼合金微粒的不锈钢三棱针配对植入20只成年家兔的股骨，饲养2个月。

Methods Forty triangular nails with HA or Co Cr Mo alloy coating by the plasma sprayed technology were implanted in pair into the bilateral femurs of 20 adult rabbits via the top of greater trochanters . The animals were killed 2 months later .

TYM钼合金轧制工艺与组织结构及再结晶温度的关系

Relation of rolling process to metallurgical structure and recrystallization temperature of tym molybdenum alloy

对Mo-Ti-Zr-C和Mo-Zr-Hf-C两种钼合金进行离子氮化处理。

Ionitriding has been earned out in two kinds of molybdenum alloys with Mo-Ti-Zr-C and Mo-Zr-Hf-C.

本文对EQ6100发动机原用铸态冷激铬钼合金铸铁挺杆体早期点蚀剥落进行了失效分析，对失效机制提出了见解；

This paper analyses the premature pitting corrosion and peeling-off of chilled Cr-Mo cast iron tappet first used in the Model EQ-6100 engine , and puts forward new views on the mechanism of this failure .

低铼钼合金高温烧结过程的研究

High temperature Sintering of Molybdenum Alloys Containing 3 wt % Rhenium

钼合金耐火材料液相烧结性能热力学研究

Thermodynamic Investigation on the Liquid Sintering of the Refractory Mo Alloys

稀土氧化镧掺杂钼合金的强化机制研究

The Strengthening Mechanism of Rare Earth Lanthanum Oxide Doped Molybdenum Alloys

铬钼合金钢钢管在工程应用中的常见问题

Problems in Application of Chromium - molybdenum Alloy Pipe in Engineering

钴铬钼合金（钴或铬是其中主要成分），未经锻造

Cobalt chromium molybdenum alloy ( cobalt or chromium predominating ), unwrought

铂铑包覆钼合金搅拌器的研制

Development of Agitators Made of Mo Alloy Clad with Pt Rh

钼合金在高温热机械应力循环下的疲劳性能

Fatigue behavior of molybdenum alloy under high temperature thermomechanical stress cycles

激光焊接铁铬钼合金与钴铬合金的机械性能

Mechanical properties of laser welds of Fe-Cr-Mo magnetizable alloy and cobalt-chromium alloy

镍钼合金粉末无缝管生产工艺研究

Study of production process for Ni-Mo alloy powder seamless pipe

多孔钴铬钼合金的上压渗流铸造工艺研究

Technological study on upper-pressure infiltration foundry of porous Co-Cr-Mo alloy

加工和处理对钼合金强度和塑性的影响

Effects of working and treatment on strength and ductility of molybdenum alloys

将多孔钴铬钼合金材料用于人工活性骨的骨架材料。

The porous Co-Cr-Mo alloy material are used as got-up active bones .

研究了粉末冶金法制取的低铼钼合金的加工性能。

The processability of low-Re Mo alloy manufactured by PM is studied .

稀土钼合金第二相粒子尺度对材料加工性能的影响

Effect of second phase particles size on the properties of molybdenum alloy