量热仪

利用锥形量热仪评价EVA/Mg（OH）2基阻燃电缆料

Assessment of EVA / Mg ( OH ) _2-Based Flame Retardant Compound by Cone Calorimeter

在国外，加速量热仪（ARC）已被广泛应用于锂离子蓄电池的研究。

Accelerating rate calorimeter ( ARC ) is suitable to studying both the thermokinetics and thermodynamics of lithium ion battery .

加速量热仪（ARC）是一种基于绝热原理设计的热分析仪器。

The Accelerating Rate Calorimeter ( ARC ) is a thermal analysis instrument based on adiabatic theory .

应用差示扫描量热仪（DSC）法研究了这三种新型阻燃剂的加入对PET结晶性能的影响。

Crystallization behavior of flame retarded PET was studied by using DSC measurement .

本文采用偏光显微镜、X射线衍射和差示扫描量热仪等研究了它们的结晶行为。

The crystallization behavior and crystallization kinetics of these polyesters was studied by POM , XRD and DSC .

用差式扫描量热仪（DSC）对BPEA-2／环氧树脂潜伏性固化体系的固化反应进行了分析。

Curing reaction of BPEA-2 / epoxy resin latent curing system was studied by DSC in this paper .

聚合物材料燃烧性和阻燃性的评价&锥形量热仪（CONE）法

Utilization of cone calorimeter for the appraisal of the flammability and flame retardancy of polymeric materials

并利用傅里叶红外光谱仪（FT&IR）和差示扫描量热仪（DSC）对聚合物的结构和性能进行了研究。

The polymer structure and property were studied by means of FT-IR and DSC .

介孔的孔径用两种不同的方法进行表征，即N2吸附法和小角X射线散射；介孔中冰的熔点和熔化焓用低温差示扫描量热仪进行测定。

Pore diameters were characterized by two different methods namely nitrogen desorption and small-angle X-ray scattering .

利用锥型量热仪（CONE）在50kW/m2的热辐照条件下，研究了纯PET和阻燃PET的阻燃和烟释放。

The flame retardation , smoke emission of pure polyester and flame retarded polyester were studied with cone calorimeter .

最后利用锥形量热仪验证了Mg（OH）2/红磷复配体系的协同阻燃效应。

Lastly , the synergistic flame-retarded effect of Mg ( OH ) _2 and red phosphorus was confirmed through the cone calorimeter .

用示差扫描量热仪（DSC）对树枝形大分子PAMAM/双酚-A型环氧树脂体系的固化反应动力学过程进行了分析。

The reaction process of PAMAM / DGEBA curing system was carefully analyzed by DSC .

采用差示扫描量热仪（DSC）分析了原淀粉和羟丙基淀粉的糊化过程中的热力学性质。

The thermal properties of all the starches during pasting were analyzed by performing DSC .

用锥形量热仪研究细水雾抑制熄灭PVC火

Study of Suppressing PVC Fire with Water Mist Using a Cone Calorimeter THE SONG OF FIRE FIGHTING Fire ceremony

用DSC差示扫描量热仪测定了各体系的动态分解温度和热效应。

The dynamically decomposing temperatures and the heat effects of different systems were determined by DSC .

采用差示扫描量热仪（DSC）测定苦楝素晶体基本的理化常数&熔点。

Two melting points of the crystal were obtained through differential scanning calorimetric ( DSC ) .

采用锥形量热仪对市场上常见的一种内装修单面涂铝PVC吊顶材料的燃烧性能进行了实验研究。

The flammability of a PVC board , with one side coated with aluminium was studied with the cone calorimeter .

CuO对硬质PVC热解、阻燃和抑烟的锥形量热仪（CONE）研究

Investigation of thermal degradation , flame retardance and smoke suppression of rigid PVC by using cone calorimeter

采用差示扫描量热仪对PTT进行非等温结晶研究。

The nonisothermal crystallization of PTT was studied by differential scanning calorimetry .

利用差示扫描量热仪（DSC）测定TPI的玻璃化转变温度（Tg）；

And the glass transition temperature ( T_g ) of TPI was analyzed by DSC .

通过偏光显微镜（PLM）和差示扫描量热仪（DSC）对MB的成核效果进行了表征。

The influence on its crystallization characteristics was also investigated by using PLM and DSC .

用光学显微镜及透射电镜（TEM）观察复合材料及其基体合金的微观组织，用硬度测试及差示扫描量热仪研究Mullite/ZL101复合材料及其基体合金的时效特性。

The ageing characteristics of the composite and its matrix alloy were examined by HB and Differential Scanning Calorimeter ( DSC ) .

使用差示扫描量热仪（DSC），对PU微胶囊的玻璃化转变及微相分离结构进行了研究；

The glass transformation and microphase separation structure of PU microcapsule were researched by DSC ( Differential Scanning Calorimetry ) .

与此同时还应用X射线小角散射技术和示差扫描量热仪等观测结构弛豫的手段测量了人工时效样品的相应现象。

The corresponding phenomena after the specimen was aged artificially was studied with the small angle X-ray scattering and DSC , which are suitable for observing structure relaxation .

以原位复合方法合成的稀土发光聚己内酰胺（PA6）为研究对象，用差示扫描量热仪（DSC）研究了其结晶行为。

The crystallization behavior of rare-earth luminous polycaprolactam ( PA6 ) prepared through in-situ polymerization was investigated by DSC .

用万能拉伸实验机和差示扫描量热仪（DSC）对物理老化和应变老化的ABS试样进行研究。

ABS samples of physical aging and strain aging were studied by universal tensile test machine and differential scanning calorimeter ( DSC ) .

采用NETZSCHDSC404型差示扫描量热仪（DSC）、扫描电子显微镜（SEM）等手段研究了添加元素Sb，Bi和Fe对Cu8P共晶合金熔点和组织的影响。

The effect of Sb , Bi and Fe on the melting points and microstructures of Cu-8P alloys were studied by means of DSC and SEM .

采用差示扫描量热仪（DSC）对试样的等温、非等温结晶以及随后的熔融行为进行测量。

Isothermal and non-isothermal crystallization kinetics and subsequent melting behavior of P ( 3HB-co-4HB ) were investigated by differential scanning calorimetry ( DSC ) .

用差示扫描量热仪（DSC）测试了硫酸铝铵储能材料体系热循环后潜热、熔点的变化；

The latent heat and melting point of ammonium alum were determined by differential scanning calorimetry ( DSC ) technique after repeated thermal cycles .

通过凝胶渗透色谱仪（GPC）和示差扫描量热仪（DSC）研究了环化产物的分子量及其分子量分布和玻璃化转变温度。

The molecular weight distribution and glass transition temperature of the cyclizated cis-1,4 polybutadiene were characterized by GPC and DSC , repectively .