重熔
- remelting;refusion
-
大直径柱塞氧-乙炔焰喷熔中频感应重熔工艺
Refusion process of middle frequency induction for oxyacetylene spraying layer on large piston
-
激光重熔参数对熔化区的影响
Effect of Laser Refusion Parameters on Fusion Zone
-
激光重熔Co基合金堆焊层的组织和性能
Study on microstructure and property of Co-based alloy by laser remelting
-
镍基高温合金真空电弧重熔过程中Mg挥发的动力学
Kinetics of Mg evaporation during VaR of a Ni-base Superalloy
-
激光重熔等离子喷涂Al2O3陶瓷层的相转变
Phase transformation of al_2o_3ceramic coating after plasma spraying and laser remelting
-
Ni基合金电渣重熔铸锭中孔洞形成的原因分析
Formation of Central Hollow Inside Ni-base Alloy Electroslag Remelting Ingot
-
激光重熔扫描速度对Co基合金凝固特性及显微组织的影响
Effect of Scanning Speeds on Solidification Character and Microstructure of Co Based Alloy in Laser Remelting
-
重点探讨了一种制备SiC颗粒增强铝基复合材料的新的工艺方法,即粉末预制块重熔稀释法。
A new way of preparing SiC p / Al composite is discussed .
-
颗粒状Cu&Pb合金重熔状态Pb偏析的形成
Formation of Lead Segregation in the Remelting Process of Particle State Copper Lead Alloy
-
激光重熔及回火对Ni基合金火焰喷焊层组织和性能的影响
Effect of laser remelting and tempering on microstructure and properties of flame spray-welded Ni-based alloy coatings
-
调整功率对电渣重熔(ESR)熔池深度的影响
Effect of Modulating Remelting Power on Pool Depth of Electroslag Remelting
-
介绍了SiC颗粒增强铸造铝基复合材料的铸锭重熔、除气和铸造过程的特征。
Remelting , degassing and casting processes of SiC particle reinforced aluminum composites were studied and analyzed .
-
激光重熔处理对含Al、Ti、TiO2等离子喷涂热障涂层组织的影响
Effect of Laser remelting on Structure of Plasma sprayed TBCs with Al , Ti and TiO 2
-
Ni基WC型自熔合金重熔涂层的制备与耐磨性能研究
Study on preparing technology and wearing resistance of remelted coating of ni-matrix / wc self-fluxing alloy
-
TIG重熔技术对吊车梁焊接接头性能影响
Influence of TIG remelting technigue on welded joint performance of crane girder
-
应用ANSYS有限元分析软件,编制了电渣重熔过程的电磁场、流场计算程序,探索性地研究了不同工艺参数条件下的磁感应强度、电磁力和电流密度的分布情况。
With finite element analysis software-ANSYS , it programs the composition of electromagnetic and flow field in ESR process .
-
锌铝基Al2O3陶瓷复合层激光重熔区内陶瓷相分布与性能之间的关系
The Relationship between Ceramic Phase Distributing and Its Micro-hardness in Laser Remelted Area of The Zn-Al Based Al_2O_ 3 Ceramic Film
-
TIG表面重熔对堆焊层耐空泡腐蚀的影响
Effect of TIG surface remelting process on cavitation erosion resistance for a pre-weld buildup layer
-
TiAl合金表面激光重熔热障涂层组织及抗高温氧化性能
Microstructure and high-temperature oxidation resistance of laser-remelted thermal barrier coatings on TiAl alloy surface
-
激光重熔对等离子喷涂ZrO2-NiCoCrAlY梯度涂层组织与性能的影响
Laser remelting treatment of plasma sprayed zro_2 - nicocraly graded coating
-
结果表明,采用激光表面重熔预处理作过渡层制备的生物陶瓷涂层的界面结合良好,表层为HA和β-TCP组成的活性生物陶瓷复合涂层。
The results show that laser remelting pretreatment is favorable to improvement of the mechanical properties and biocompatibility of bioceramic coating .
-
电渣重熔用CaF2+Al2O3和CaF2+Al2O3+CaO系熔渣传氧的研究
Study on oxygen transfer through molten slags of caf_2 + al_2o_3 and caf_2 + al_2o_3 + Cao systems for ESR
-
激光重熔对Al-Si合金快速凝固共晶生长的数值模拟
Numerical simulation of laser surface remelting and rapid solidification for Al Si alloy in eutectic symbionic zone
-
与等离子喷涂涂层物相相比,激光重熔后涂层变化不明显,真空回复后涂层发生较大变化,但没有达到预期回复WC的目的。
Compared with the plasma-sprayed coating , the phases of the laser remelting and vacuum restoring coatings were changed .
-
激光重熔对TiAl合金表面等离子喷涂热障涂层耐热腐蚀性能的影响
Effects of Laser-Remelting on Hot Corrosion Resistance of Plasma-sprayed Thermal Barrier Coatings in Surface of TiAl Alloy
-
表面重熔区的硬度(HV)提高了近40,耐磨性能明显高于基体材料。
The hardness of surface remelting zone is increased by 40 Hv , superior to matrix in wear resistant .
-
切丝重熔法制备的BGA焊球及其表面形貌
Fabrication of Solder Balls by Fine-wire Cutting - remelting and Its Surface Appearance
-
TIG重熔表面抑制了片层状马氏体的裂纹发展,避免了大的物质剥落。
TIG remelting process might also suppress the extention process of crack so that to eliminate spalling off of fragements .
-
TiAl合金表面激光重熔复合陶瓷涂层温度场数值模拟及组织分析
Numerical Simulation on the Temperature Field and Microstructure Analysis of Laser Remelting Composite Ceramic Coating on TiAl Alloy Surface
-
热喷涂稀土铝层及重熔处理20g钢抗腐蚀性能的研究
Study on Corrosion Resistance of Hot Spraying Rare-earth Al Layer and Remelt Treatment for 20g Steel