酸洗工艺

酸洗工艺酸洗工艺
  1. 碱酸洗工艺对Ti-15-3合金组织及性能的影响

    Effect of Alkali - acid Picking on Microstructures and Properties of Ti - 15 - 3 Alloy

  2. 316L不锈钢酸洗工艺及耐点蚀性能研究

    Study on Pickling Process and Pitting Corrosion of 316L Stainless Steels

  3. 304不锈钢Na2SO4电解酸洗工艺的研究

    Study on Na_2SO_4electrolytic pickling process of 304 stainless steel

  4. 为提高Cf/Mg复合材料的耐蚀性能,本文对Cf/Mg复合材料表面Sol-gel法成膜和其前处理工艺进行了研究,利用正交优化试验确定了前处理酸洗工艺和Sol-gel法成膜工艺的有关参数。

    Technological process of Sol-gel coating on Cf / Mg composite was researched in this paper to improve its anticorrosion property . The best technical parameters of pre-treatment and Sol-gel coating were obtained by orthogonal tests .

  5. 介绍了某钢铁厂的钢材酸洗工艺中排放出的酸洗废水的特点,进行了回收硫酸亚铁生产聚合硫酸铁混凝剂(PFC)工艺的研究。

    The characteristics of steel pickling waste liquor discharged by a steel mill were described . Ferrous sulfate in steel pickling waste liquor was reclaimed to produce polymeric ferric sulphate coagulant ( PFC ) .

  6. 掺杂蓝钨不酸洗工艺的研究

    Study on non - acid washing process of doped blue tungsten

  7. 不锈带钢酸洗工艺及其质量控制

    The Pickling Process and Quality Controlling of Stainless Steel Strips

  8. 最后对化学酸洗工艺作了使用效果分析。

    Finally it analyzes the effect of the pickling process .

  9. 不锈钢盘条酸洗工艺研究

    The Research on Stainless Steel Wire 's Acid Pickled

  10. 不锈钢管酸洗工艺的改革

    Innovation on acid pickling process for stainless steel tube

  11. 镁合金光亮酸洗工艺的研究

    Study on process of bright pickling for magnesium alloys

  12. 超薄型不锈钢螺纹管酸洗工艺

    Pickling Technology for Ultrathin Stainless Steel Screwing Tubes

  13. 关于冷轧不锈钢碱洗与酸洗工艺探讨

    Make an Inquiry about Technics of Alkaline and Pickling on Cold Rolling Stainless Steel

  14. 不锈钢冷轧卷连续酸洗工艺参数的正交试验研究

    Orthogonal Test Research of Continuous Pickling Process Parameters on Stainless Steel Cold Rolling Coil

  15. 抑制氮氧化物产生的铜件酸洗工艺

    Acid Dipping Process for Copper and Brass Article Capable of Inhibiting Formation of Nitrogen Oxides

  16. 结论:合理的酸洗工艺可有效去除铸钛表面污染层。

    Conclusion : The contaminated layer can be availably removed with the right acid treatment .

  17. 铜件酸洗工艺的研究

    Research of Copper Part Acid Washing Process

  18. 推拉式浅槽盐酸酸洗工艺的操作经验

    Operation Experience of Push-pull Pickling of Strip

  19. 钛、镍特种金属冷轧生产中退火、酸洗工艺研究

    Study on Pickling and Annealing Process in Cold Rolling of Special Titanium and Nickel Metal

  20. 酸洗工艺中的酸浓度控制

    Acid Concentration Control of Pickling Technology

  21. 集流体铜钉酸洗工艺对碱锰电池性能影响

    Effect of process conditions of current collector acidic cleansing on the performance of alkaline Zn / MnO_2 battery

  22. 在电厂锅炉酸洗工艺中,酸洗缓蚀剂是减少酸对金属的腐蚀的重要添加剂。

    Acid cleaning inhibitor is an important additive on reducing corrosion of in the process of cleaning boiler .

  23. 铜及铜合金零件无黄烟光亮酸洗工艺研究与应用

    Study and Application of Process of Bright Acid Washing Without Nitrogen Oxide for Copper and Copper Alloy Parts

  24. 本研究成果可以帮助钢铁生产企业掌握拉矫工艺参数的正确组合,优化酸洗工艺参数,提高酸洗效率。

    This research can help the steel production enterprises know the correct combination and optimize pickling process to improve pickling efficiency .

  25. 粗苯酸洗工艺与加氢工艺的比较不饱和聚合物的加氢

    Comparison between Crude Benzol Acid Washing Process and Hydro-refining Process of Coking Waste Water Treatment Process Hydrogenation of Polymer Containing Polydiolefin Units

  26. 研究结果表明,采用本文中的酸洗工艺可以有效清除不锈钢焊缝表面的氧化皮,并改善其耐点蚀性能。

    Test results showed that the optimized pickling process could clean oxide skin of weld surface in effect and improve pitting-resistance property greatly .

  27. 本文就酸洗工艺,对紊流酸洗酸液浓度检测及带钢酸洗质量的控制等提供了行之有效的方法。

    According to pickling technology , this article provides effective methods for the acid concentration test and strip quality control in Turboflow pickling .

  28. 应用立塔式静电除雾器净化宝钢冷轧厂酸洗工艺段酸雾的实践

    The practice of applying erect-style electrostatic demisting precipitator to purify the acid mist in the acid washing technologic line of Baogang Cool Rolling Factory

  29. 简要叙述了酸洗工艺从传统的酸洗工艺到紊流酸洗的发展以及紊流酸洗工艺在鞍钢冷轧厂的应用。

    The process of pickling technique from traditional one to turbulent one and the application of the latter in Angang Cold Rolling Plant are simply expounded .

  30. 前言:钛及钛合金薄板在经过碱、酸洗工艺处理后,经长时间放置板材表面经常会出现“酸斑”现象。

    After being chemically processed and laid-aside for a long time , some sheet surface of Ti and Ti alloy would suffer from " etching trace " .