连杆机构

连杆机构设计的CAD方法

CAD Method for Designing Linkages

含R、P副空间连杆机构摆动力完全平衡的质量矩替代法（Ⅰ）&质量矩替代

A Mass Moment Substitution Method for Complete Shaking Force Balancing of Spatial Linkages Involving R and P Pairs Part 1 Mass Moment Substitution

基于Web技术的平面连杆机构CAD系统研究

Research on Web-based CAD system for planar linkage mechanism

平面四连杆机构CAD及动态机构图形演示

CAD of plane four-connecting-link mechanism and demonstration of dynamic mechanical drawing

基于MATLAB的装载机连杆机构优化设计

Optimization Design of Loader Connecting Rod Mechanism Based on MATLAB

全R副空间连杆机构摆动力完全平衡的质量静替代法

PDEL Method for Complete Shaking Force Balancing of Spatial Linkages with Only R Pairs

应用杆组法和CAD技术实现平面连杆机构运动分析与动态模拟

Applying coupler-groups method and CAD technology to realize the movement analysis and dynamic simulation of planar linkage

介绍了一种用C语言编制通用平面连杆机构动态模拟软件的方法。

A method for carry out the general plane linkage 's kinetic simulation on computer by using programing language C is introduced .

建立了曲柄连杆机构的可靠性模型，并提出了通用的n中取k模型。

A reliability model of crank mechanism was built , and the general k / n model was presented .

基于ADAMS的连杆机构多体动力学仿真研究

Study on multi-body dynamics simulation of linkage based on ADAMS

总体参数及四连杆机构的尺寸规划&基于PRO/E的API抽油机模块化设计之一

Population parameter and dimension layout of four-bar linkage : PRO / E based API pumping unit modularized design

该文方法特别适用于只含R、P、C、H运动副的空间连杆机构。

The method is especially suitable to the kinematic error analysis of the spatial linkage which involves only R , P , C and H pairs .

TM型抽油机连杆机构尺寸参数计算的一种简便方法

A Simple Way to Calculate the Dimensional Parameters of Quadric Crank Mechanism on Mode TM Pumping Units

介绍了连杆机构设计的CAD方法，具体介绍了具有急回运动的四杆机构设计综合的CAD方法，包括其数学模型的建立、运行过程以及该方法的使用性。

In this paper , the author describes the CAD method for designing linkages with quick return motion , including its calculation equations , computer program and applications .

通过采用MATLAB仿真教学法对平面四连杆机构的运动轨迹进行全面描述。

This article is to apply a MATLAB simulation teaching technique which is geared analyzing the plane four links mechanism so as to describe generally moving trail .

并利用Visualc++对Pro/Engineer进行二次开发，建立发动机曲柄连杆机构CAD系统。

Development of a CAD system for crank-link mechanism , which is based on the Pro / Engineer software in the Visual C + + environment , is also presented .

简单介绍了虚拟样机技术和ADAMS软件，最后给出了一个平面四连杆机构应用实例。

The article simply introduces virtual prototype technology and ADAMS . Finally , a four-bar mechanism is given as example of application of ADAMS .

用AUTOCAD作图检查弧形连铸机四连杆机构结晶器振动台的轨迹精度

By using AutoCAD draw method to check the locus accuracy of the crystallizer vibro-bench that fixed in the four articulated connecting rod assembly of the arc continues casting machine

平面连杆机构KED分析的样条模型法

The spline model method of ked analysis in planar linkage

结果表明：当双四连杆机构前三级杆等长且I级杆与III级杆垂直时，机构运动灵活度取最大值。

The result indicates that the system has the maximal dexterity when the first three links of the double four-bar linkage mechanism have equal length and link I is perpendicular to link III.

将图解原理与解析法有机地结合起来，给出了一种同时按行程速比系数K和许用传动角[γ]设计平面连杆机构的解析法。

A method to design the planar linkage mechanism according to the coefficient of travel speed variation K and the allowable drive angle [ γ ] was established based on a combination of diagrammatic method and analysis method .

计算机模拟连杆机构设计平面连杆机构KED分析的样条模型法

Computer simulation for four-bar linkage design the spline model method of ked analysis in planar linkage

应用CATIA软件和多体动力学仿真软件ADAMS，有限元分析软件ANSYS，构造了一个柴油机曲轴轴系（曲柄连杆机构）的虚拟样机模型。

Using CATIA and Multi-body System Dynamics software ADAMS and the Finite Element Analysis software ANSYS , The virtual prototype module of a diesel engine crankshaft parts ( crankshaft mechanism ) is created .

本文将TM型抽油机曲柄连杆机构尺寸参数的计算问题简化为极大值极小化的二维最优化问题，并提出用双重二次插值法进行求解。

In this paper the calculation process of dimensional parameters of quadric crank mechanism of Model TM pumping units is simplified into a minimized two-dimensional optimum problem and double quadric interpolation method is employed to solve the problem .

就基于MEMS和连杆机构的扑翼驱动机构设计方案进行了分析比较，探讨了扑翼驱动机构的实现途径和方法，并针对基于四杆机构的扑翼驱动机构进行了优化设计；

The design of flapping-wing actuators , based on MEMS technology and linkage mechanism , is analyzed , the methods and ways of realizing the actuators are also discussed , the design of actuators based on the four-linkage mechanism is optimized .

应用三维建模软件CATIA、多体动力学仿真软件ADAMS和有限元分析软件ANSYS，构造了柴油机曲柄连杆机构的多刚体动力学模型和将连杆柔性化后的多柔体动力学模型。

By using Three-dimensional modeling software CATIA and Multi body System Dynamics software ADAMS and the Finite Element Analysis software ANSYS , the multi-body dynamics model and make the connecting-rod flexibility for the flexible multi-body dynamics model are created .

国产300MW汽轮机调节汽阀连杆机构主要由一个门杆、三个连杆和一个活塞杆组成。

The control valve linkage of a home-made 300 MW steam turbine mainly consists of one valve stem , three links and one piston rod .

空间两轴垂直交叉的RSSR曲柄摇杆机构和RSSP曲柄滑块机构，是空间连杆机构中应用最广泛的四连杆机构。

The RSSR crank-rocker mechanism with two shafts crossed at right angles and the RSSR slider-crank mechanism are most widely used four-bar spatial linkages .

用软件ADAMS建立了曲柄连杆机构的仿真模型，进行了运动学和动力学仿真，得出了气体力、连杆力等曲线，并据此确定了曲轴的危险工况；

Setting up simulation model of crank - connecting rod via the software ADAMS , and through kinematics and dynamics simulation , obtaining curves of air force , force loaded on the crank and so on , and thus confirming the dangerous situations of crankshaft ;

针对连杆机构轨迹优化问题，GA、QGA和RQGA所求得的最优解与目标值之间均存在较大的偏差，所以对目标函数进行了改进，但是这一问题仍未得到合理的解决。

For connecting rod mechanism path optimization problem , there are large deviations between the optimal solutions and the targets . So the objective function is improved , but the problem is still not got reasonable solution .