苯乙烯树脂

对酚醛补强树脂和高苯乙烯树脂/SBR共混物增硬子午线轮胎三角胶进行研究。

The application of the reinforcing phenolic resin and the high styrene resin / SBR blend in the bead filler of radial tire was investigated .

高苯乙烯树脂/SBR共混物较适用于增硬半钢子午线轮胎三角胶，酚醛补强树脂较适用于增硬全钢子午线轮胎三角胶。

And the high styrene resin / SBR blend was suitable to harden the bead filler of PCR tire and the reinforcing phenolic resin was suitable to harden the bead filler of TBR tire .

氯丁橡胶并用高苯乙烯树脂及其在齿形胶带中的应用

Cr / hs blends and application to producing gear rubber belts

苯乙烯树脂制备及在亲水涂料中的应用

Preparing Fine Grains of Styrene-Divinylbenzene Resin and Applying Them to Hydrophilic Coating

聚苯乙烯和丙烯腈-丁二烯-苯乙烯树脂中残留苯乙烯单体的测定气相色谱法。

Determination of residual styrene monomer in polystyrene and acrylonitrile-butadiene-styrene resins by gas chromatography .

萜烯苯乙烯树脂溴值的测定

The Determination of Terpene Styron Bromine Value

对氯丁橡胶并用高苯乙烯树脂进行了实验，通过正交试验法对硫化体系做了优化选择，确定了制作齿形胶带的最佳配方，提高了胶带使用寿命。

Vulcanization systems of the blends were optimized using the orthogonal design method and the optimum composition which is used to make gear rubber belts was given .

叙述了改性萜烯树脂&萜烯苯乙烯树脂产品的生产工艺，产品软化点在90～110℃，颜色号为2～3，平均得率为92.9%，并介绍其应用范围以及发展前景。

The production process , application and development prospects of terpene - styrene resins are introduced . Under selected reaction conditions , solid resin with softening point 90 ~ 110 ℃, Gardner colour 2-3 and yield 92.9 % has been produced .

结果表明，酚醛补强树脂和高苯乙烯树脂/SBR共混物增硬三角胶的效果较好，成品轮胎的耐久性能远超过企业标准。

The results showed that the good hardening effects on the bead filler were obtained by both the reinforcing phenolic resin and the high styrene resin / SBR blend respectively , and the endurance of finished tires was far better than that specified in the enterprise standard ;

Fenton试剂预处理苯乙烯系树脂中间体废水的试验研究

Fenton Oxidation for Pre-treatment of Intermediates of Resin for Polystyrene Style Wastewater

结果显示，苯乙烯类树脂具有最好的增韧效果，当其含量达到40份时，能使PS体系的简支梁缺口冲击强度达到42.1kJ/m2。

Experimental results indicated that styrene resins have the best toughening effect and the notched Charpy impact strength was up to 42.1 kJ / m 2 when its content is 40 phr .

苯乙烯系树脂连续本体聚合某些工程问题的探讨

Some Engineering Problems of Continuous Bulk Polymerization of Styrene Resins

1990～1991年世界苯乙烯系树脂技术进展

The Technique Development of Styrene Series Resin Production at abroad in 1990 & 1991

苯乙烯系树脂的无卤阻燃研究进展

Recent Development in Halogen-free Flame Retardant Styrene Resins

苯乙烯系列树脂中残留单体和挥发性组分的气相色谱测定方法

Determination of the Residual Monomer and Volatile Components in the Styrene Plastic Resin Series

苯乙烯系树脂和聚烯烃的共混物

Blends of polyolefins with styrene resins

应用双螺杆挤出机，将聚碳酸酯（PC）分别与2种具有不同粘度的ABS（丙烯腈/丁二烯/苯乙烯共聚物）树脂（ABS747和ABS757）进行熔融共混，制备出二元合金体系。

Polycarbonate ( PC ) was melt-blended respectively with two kinds of ABS ( ABS 747 and ABS 757 ) with different viscosity by using a twin-screw extruder to form two binary alloy systems .

用脱离子水作萃取剂，萃取液经苯乙烯阳离子交换树脂交换吸附后所得的催化剂溶液可回用于PTA氧化装置。

In the separation of PTA oxidation residue , pure water was used as the extractant , and extracted solution was exchanged and absorbed by ionic exchanged resin of styrene . The catalyst recovered can be recycled in PTA production unit .

苯乙烯马来酸酐树脂鞣剂的制备及应用

Preparation & Application of Styrene-Maleic Anhydride Copolymers as Leather Tanning Agent

苯乙烯系增韧树脂本体原位制备技术的研究

Study on the Preparation Technology of Toughened Polystyrene with In-situ Bulk Polymerization

溶剂对苯乙烯型吸附树脂孔结构的影响

Effect of Solvent Treatment on the Pore Structure of Styrene Type Adsorbent Resin

针对十八胺对强碱性苯乙烯系阴树脂的污染与复苏进行了研究。

A series of experiments shows , octadecylamine has strong effect of pollution to anion resin .

孔结构是苯乙烯型吸附树脂（以下简称吸附树脂）特征之一。

The pore structure is one of the characteristics of the styrene type adsorbent resin ( abbreviate adsorbent resin ) .

控制不同的反应条件，采用甲基丙烯酸、苯乙烯与环氧树脂在丙二醇丁醚/正丁醇溶剂中接枝共聚，合成了粒径在87～104nm范围的环氧树脂水分散液。

Water dispersions of epoxy resin with small particles from 87 to 104 nm were synthesized by the graft copolymerization of epoxy resin with methacrylic acid and styrene in a mixed solvent of propylene glycol monobutyl ether and butanol with a specific composition .

α-甲基苯乙烯改性ACS树脂的形态和流变学

Rheological Behavior and Morphology of α - Methylstyrene Modified ACS Resin

对兰州石化公司ABS生产装置生产的丙烯腈丁二烯苯乙烯（ABS）树脂废水水质进行了分析和处理技术研究。

The wastewater produced in the production of acrylonitrile-butadiene-styrene ( ABS ) resin with ABS unit of the Lanzhou Petrochemical Company was treated with biochemical method .

对十八胺（ODA）对强酸性苯乙烯系阳离子交换树脂的污染状况及复苏方法进行了研究.通过一系列试验，研究了不同浓度的ODA对阳树脂的污染程度及复苏后的效果。

The ODA how to fouled the strong acidic cation exchange resin and the recovery method was studied by means of a series of experiments .

通过对丙烯腈-丁二烯-苯乙烯（ABS）树脂的研究，设计了ABS-750SW生产中的聚丁二烯胶乳配方、ABS接枝聚合配方以及凝聚、掺合生产工艺，开发出超白ABS-750SW产品。

Through the studies on acrylonitrile-butadiene-styrene copolymer ( ABS ) resin , a kind of super white ABS was produced in accordance with the recipes of butadiene latex and grafting copolymerization onto ABS as well as the blending process developed in this paper .

综述了国内外丙烯腈-丁二烯-苯乙烯（ABS）树脂的生产能力、供需状况和消费结构，预测了市场走势，对发展我国ABS树脂产业提出了几点建议。

The paper reviewed the worldwide production capacity , supply and demand status and consumption structure of acrylonitrile - butadiene - styrene ( ABS ) resin , and forecasted its market prospect . Suggestions were presented for developing the industry of ABS resin in China .

将大孔型弱碱性苯乙烯系阴离子交换树脂D370应用于精制微生物法丙烯酰胺水剂过程中。

Microporous styrene type weak basic anion exchange resin D370 is used to refine acrylamide solution in microbial method .