脉冲电源

基于DSP的软开关逆变式脉冲电源

Research on Soft-switching Inverting Pulse Power Supply based on DSP

高性能LD阵列脉冲电源

Pulse Power Supply for High Performance Semiconductor Laser Diode Arrays

基于FPGA控制的线切割机床脉冲电源

Pulse Power Supply of Wire EDM Machine Based on FPGA Control

基于X波段行波管实验研究的需要，研制了行波管脉冲电源系统。

The pulse power supply for X-band Traveling-Wave Tube ( TWT ) experiment was developed .

RC脉冲电源维持电压问题的研究

The Research on Sparkle Maintaining Voltage of RC Pulse Power Supply

嵌入式微机与PWM联合控制的脉冲电源研制

Pulse Power Supply based on Embed System and PWM

用中频脉冲电源溅射ZnO薄膜时脉冲参数对溅射电压的影响

The Influence of Power Mode on the Target Voltage When Sputtering the ZnO Film by DC Pulse

介绍了采用IGBT逆变电路的高压脉冲电源的设计和电路构成。

This paper presented an IGBT inverter for high voltage pulse source .

对双向窄脉冲电源引发的气液混合体反应器中放电脱除靛蓝二磺酸钠（IDS）水溶液的色度进行了实验研究。

Removal of the indigo carmine in the water-air mixture discharge reactor has been investigated .

IGBT半桥逆变式电火花加工脉冲电源

IGBT Half Bridge Inverter Pulse Power supply for EDM

离子渗氮及等离子热处理用IGBT逆变型脉冲电源

Pulsed Power Supply with IGBT Inverter for Plasma Nitriding and Plasma Heat Treatment

PWM控制节能式电火花线切割脉冲电源主电路是一个电流闭环控制系统，放电电流的动态特性是影响电火花线切割加工工艺性能的重要因素。

The main circuit of the wire-incisory pulse power with PWM energy-controlled electric spark serves as a closed loop .

基于POS的紧凑一体化功率脉冲电源

Design and Simulation for Compact and Integrative Pulsed Power Supply Using POS

IGBT脉冲电源系统的设计与研究

The Investigation of IGBT Pulse Power System

采用模块RSD触发技术的高压固态脉冲电源

High-Voltage Solid-state Pulse Generator Using Cascaded RSD Triggering Unit

采用DSP和CPLD的100kV高压脉冲电源控制系统

Control System of 100 kV High Voltage Pulse Source Using DSP and CPLD

RSD在脉冲电源领域中的应用

The Application of RSD on Pulsed Power Supply

采用自制的脉冲电源，通过调节脉冲电流峰值，研究了脉冲电流峰值对亚共晶Al-Si合金凝固组织的影响。

The effect of pulse current on solidification structure of hypoeutectic Al-Si alloy was studied .

采用高频脉冲电源，在不锈钢板上制得镍基纳米SiC复合镀层，镀层表面光洁平整、SiC含量较高。

The Ni / nano-SiC composite coating with smooth surface was obtained by the fast pulse plating on the stainless steel board .

新型数字脉冲电源与PC机及PMAC的通信方法研究

Study on Communication design for MCU Controlled Pulse Generator with PC and PMAC

结果表明：采用脉冲电源，选择浓度合适的NaCl电解液和恰当的电参数加工能获得较好的表面质量。

The results illustrated that by optimizing proper concentration of NaCl electrolyte and electric parameters could obtain relatively good surface quality .

基于MSP430的ELID磨削脉冲电源的设计

Design of grinding pulsed power ELID based on MSP430

基于单片机的低频高压脉冲电源的研究一种结构紧凑重频高压ns脉冲电源的设计

Low-frequency and High-voltage Pulsed Power Supply Based on Single Chip Micyoco ; Design of a Compact Repetitive High-Voltage Nanosecond Pulse Generator

它由罐顶测量仪、脉冲电源、STD工业计算机及多路转换器组成。

It is composed of a top tank gage , a pulsed power source , an industrial STD computer and a multiplexer .

复合结构60A电流型WEDM脉冲电源设计与实现

Design and Realization of Complex Structure 60A Current Type WEDM Impulse Power

在实际电火花加工过程中，微细电火花加工中一般采用的是RC脉冲电源，减小电容就能够减小放电能量。

In the process of actual EDM , RC pulse power is generally used in Micro-EDM , which reduces the discharge of energy through reducing the capacitor .

根据理想电源模型开发出一种高效、节能、环保型大面积PCD复合片电火花专用脉冲电源。

According to this model , a high efficiency , energy saving and environment protecting pulse power supply was developed .

ECRH负高压脉冲电源的研究

Study on the High Negative Voltage Pulse Power Supply for ECRH

提出传统PID与小脑模型神经网络控制相结合的控制策略。从而实现对电源系统的记忆控制和实时控制，并且提高了脉冲电源系统的动静态性能和提取率。

The traditional PID control strategy combined with neural network control is used to realize memory control and real-time control for the power system through comparing the traditional PID with CMAC neural network control .

采用KFKClK2TiF6KBF4和LiFKFNaFK2TiF6KBF4熔盐体系，利用直流和脉冲电源在石墨基体上制备了TiB2镀层。

TiB_2 coatings were prepared onto graphite substrate from KCl-KF-K_2TiF_6-KBF_4 and LiF-NaF-KF-K_2TiF_6-KBF_4 melts by direct current and pulse current .