胶粘剂

介绍了一种无游离异氰酸酯基聚氨酯胶粘剂的制备方法，采用端环氧基聚氨酯为A组分，多胺化合物为B组分。

A method for preparing a polyurethane adhesive without free isocyanate monomer is introduced .

CAR系统完全适合辅助橡胶、塑料和胶粘剂等的配方设计和试验。

CAR system is an aid suitable for the formula design and experiment of rubber , plastics and adhesive .

胶粘性能：胶粘剂对纸品的粘合速度和强度的能力

Gullibility : Measure of speed of paper adhesive bonding and its strength .

K值越大，表明胶粘剂在麦秆表面的扩散渗透能力越强。

The bigger K value was , the stronger penetration and spreading capacity was .

PVC薄膜&尼龙织物复合用胶粘剂的研制

Study on the Adhesives for Bonding PVC Film to Nylon Textiles

PVC密封条静电植绒胶粘剂的研制

Study on the Electrostatic Flocking Adhesive for PVC Sealants

废PS塑料胶粘剂制备的若干技术问题

Some Technical Problems in Adhesive Preparation of the Waste Polystyrol Plastics

PVC塑钢皮专用胶粘剂的研究

Research in special Adhesive for PVC Plastic-steel

一种新型PVC薄膜胶粘剂

A New Adhesive for PVC Film

研究了丙烯酸羟乙酯的用量及A组分与B组分的配比对双组分丙烯酸酯胶粘剂性能的影响。

The influence of hydroxyethyl acrylate quantity and composing ratio between A and B component on the properties of the two-component acrylic adhesive was investigated .

介绍了UV光固化胶粘剂的优缺点及应用领域；

Advantages , defects and usage fields of the UV curable adhesives were introduced in the article .

UV辐射固化胶粘剂综述

Review of UV-Curing Adhesives

对PVA用量、聚合反应温度、引发剂、pH值、AA/AAm等对胶粘剂性能的影响进行了研究。

The effects of polymerization temperature , initiator , pH , PVA volume on adhesive properties were studied .

本文采用水性高分子异氰酸酯胶（API胶粘剂）对东北主要树种落叶松、桦木和柞木的胶接性能进行了研究。

Bonding properties of Larch , Birch and Oak with aqueous polymer isocyanate adhesives were studied in this paper .

PS建筑装饰胶粘剂

PS Building decorative adhesive

硅氢加成型室温固化硅橡胶胶粘剂的研究聚二甲基硅氧烷结构的~1HNMR研究和硅氢、硅羟基含量的测定

Study of structure of polydimethylsiloxanes and determination of hydrogen and hydroxyl bonded to silicone by Fourier transform ~ 1h NMR

影响VRLA蓄电池用胶粘剂固化效果的若干因素

Several factors influencing the curing-effect of adhesive for VRLA batteries

SBS胶粘剂的研究现状

Research actuality of SBS adhesive

环氧树脂/丙烯酸树脂/纳米SiO2复合型胶粘剂的研究

Study of EP / Poly ( MMA / BA / MAA ) / nm-SiO_2 Composite Adhesive

采用正交设计法，研究了合成以CR为基础的三元接枝共聚胶粘剂的较佳配方和工艺条件。

Abstract : The synthesis and adhesive strength of neoprene-based three-component graft copolymer ad - hesive have been investigated by using the Latin square design .

结果显示，采用MC为胶粘剂、较低的裂解升温速度制备的预涂层性能最好；

The result shows that the precoating has good properties by using MC as adhesive and adopting slow pyrolysis speed ;

用SEM研究了不同组分对胶粘剂微观形貌的影响，用DMA研究了聚丙烯酸酯的改性对胶粘剂的阻尼性能的影响。

Influence of different composition on adhesive micromorphology was studied by SEM and addition of polyacrylate on damping performance by DMA .

介绍在采用E1级脲醛树脂胶的情况下，生产E1级刨花板对设备、胶粘剂、刨花制备、热压工艺及检测的要求。

An account is given of the requirements for equipment , adhesive , particle preparation , hot-pressing technology and testing methods when producing Grade E_1 particleboard with E_1 UF resin .

高渗透弹性环氧胶粘剂GIC的研制及其性能

Preparation and Properties of High Permeable Elastic GIC Epoxy Adhesive

无游离异氰酸酯聚氨酯胶粘剂的研制分光光度法测聚氨酯胶粘剂中NCO含量的研究

Study on Isocyanate Monomer Free Polyurethane Adhesive

本课题为了提高SBS胶粘剂的性能，通过接枝改性单体来增加胶粘剂的极性，改善SBS与被粘物体的相容性。

In order to enhance the adhesive performance of SBS , this paper increases the polarity of SBS adhesive through grafting modification monomer .

AA/AAm改性的PVF高速粘贴标签胶粘剂的研制

Preparation of AA / AAm modified PVF beer sticking label adhesive

用FTIR跟踪监测环氧丙烯酸酯胶粘剂光固化过程并研究了光引发剂体系中辐射时间与双键转化率的关系。

The paper used FTIR to monitor the curing progress and studied the effects of photoinitiators on the relationship of exposure time and conversion .

聚氨酯漆固化剂、聚氨酯胶粘剂：游离甲苯二异氰酸脂（TDI）。

PU paint firming agent , PU Jiaozhanji : floating toluene two different cyanic acid resin ( TDI ) .

用转相乳化法制备VAE胶粘剂

Preparation of VAE Adhesive by Way of Phase Transformation Emulsification