聚氨酯橡胶

浇注型聚氨酯橡胶与钢板粘合工艺的试验研究

Test on the Binding of Pouring Polyurethane Rubber with Steel Plate

聚氨酯橡胶通用模在冲裁微薄零件中的应用

Application of General Polyurethane Rubber Dies to Blanking the Very Thin Parts

国产聚氨酯橡胶筛板的推广应用

Application and Dissemination of Polyester Rubber Sieve Plate Made in China

模型材料是低弹模的聚氨酯橡胶。

The Low modulus material of model is urethane rubber .

聚醚型聚氨酯橡胶的合成及浇注工艺的研究

Syntheses of polyether-urethanes rubber and Study on castable process

准静液挤压和聚氨酯橡胶应用新方法

Quasi_Hydrostatic Extrusion and New Application Method of Polyurethane Rubber

电器定位座聚氨酯橡胶模设计

Design of polyurethane-rubber die for electric appliance positioning base

石油钻井泵聚氨酯橡胶活塞和泵阀的磨耗

Abrasion test of polyurethane rubber in piston and valve of petroleum drill pump

聚氨酯橡胶冲压技术在新品研制中的应用

Applications of Polyurethane Pressing Method in New-Product Development

聚氨酯橡胶冲裁模具的设计探讨

Study on Design of Polyurethane Rubber Blanking Die

改性环氧底胶对不锈钢与聚氨酯橡胶粘接的影响

Influence of modified epoxy adhesive on adhesion of stainless steel and casting polyurethane rubber

聚氨酯橡胶辅助压筋复合模设计

Design of the Polyurethane-rubber-Assisted Rib-Pressing Compound Die

同时指出了设计和使用聚氨酯橡胶冲模中应注意的问题。

Some problems should be pay attention to during the course of design and service .

聚氨酯橡胶修补剂的研制

Development of polyurethane-based renovator for rubbers

这个球是空心球体，表面有一层厚厚的聚氨酯橡胶。

The ball is a hollow aluminum sphere covered with a thick layer of polyurethane rubber .

到目前为止密封剂产品主要是硅树脂和聚氨酯橡胶，其次是乳胶和丁基橡胶。

Silicones and urethanes are by far the leading sealant products followed by latex and butyl rubber .

聚氨酯橡胶的固定磨粒湿磨损机理的试验研究

On the Fragmentation Mechanism of Abrasive Grain A STUDY ON THE MECHANISM OF WET ABRASION FOR POLYURETHANE RUBBER-CONSOLIDATED ABRASIVE

运用有限元软件ABAQUS/Explicit建立聚氨酯橡胶微冲裁模分析模型，对板料冲裁过程进行数仇模拟。

For numerical simulation of sheet blanking , the polyurethane rubber micro-blanking mould analytical model was established in ABAQUS / Explicit .

研制出改性环氧胶粘剂作为底胶用于不锈钢与浇注型聚氨酯橡胶的粘接。

In this paper , the modified epoxy adhesive applying in adhesion of stainless steel and casting polyurethane rubber is developed .

采用聚氨酯橡胶模能简化灯具反射器的制造工艺，防止起皱和拉裂。

The manufacturing process is simplified for lampshades and the use of polyurethane die will prevent the lampshades from wrinkling and tearing .

分析了铝钎焊料的加工工艺，说明了聚氨酯橡胶模的性能和优点。

The manufacture process of aluminum foil was analyzed , explained the performance and the merit of the polyurethane rubber punching die .

品种有天然橡胶、丁苯橡胶、丁腈橡胶、氯丁橡胶、异丁橡胶、聚氨酯橡胶、氟橡胶等。

Species are natural rubber , styrene-butadiene rubber , nitrile rubber , chloroprene rubber , isobutyl rubber , polyurethane rubber , fluorine rubber and so on .

介绍了近年来六种新问世的聚氨酯橡胶筛板的特点、安装结构以及适用范围，为用户了解及选用提供了依据。

Introducing the features , installation structure and application scope of six kinds of polyester rubber sieve plate which have come out newly in recent years .

介绍了铝合金茶壶橡胶胀形模具结构，阐明了聚氨酯橡胶制作凸模的优点。

The structure of rubber bulging die for the aluminium alloy teapot is introduced . The advantage of the manufacturing punch with the polyurethane rubber is expounded .

我厂主要生产各种硅橡胶、氟橡胶、三元乙丙橡胶、聚氨酯橡胶等特种橡胶制品和天然橡胶、通用橡胶制品，以及各种塑料制品。

Our factory mainly produces special rubber products , natural rubber , general rubber like silicon rubber , fluorin rubber , ternary rubber and all kinds of plastic products .

在了解聚氨酯橡胶冲裁的过程和聚氨酯橡胶冲裁的工艺性的基础上，必须掌握聚氨酯橡胶冲裁模具主要零件的设计要领。

On the base of understanding the blanking process of polyurethane rubber and its processing properties , the design gist of the blanking die of polyurethane rubber must be mastered .

利用弹性介质（聚氨酯橡胶）对钣金件进行单轴柔性滚弯成形是一种先进的钣金制造工艺。

One-axle rotary shaping with elastic medium ( polyurethane ) is an advanced technology for sheet metal forming which combines the principle of traditional roll bending with the advantage of stamping .

研究了2,5-二甲基-2,5-二叔丁基过氧化己烷（简称双-2,5）对混炼型聚氨酯橡胶的综合性能的影响，并与硫黄硫化的聚氨酯橡胶的性能进行比较。

The influence of 2,5-Dimethyl-2,5-di ( tert-butylperoxy ) hexane on the property of blending-type polyurethane ( PU ) rubber was researched . The property was contrasted with the sulfur curing system .

通过在不饱和聚酯树脂中加入活性端基聚氨酯橡胶来降低树脂的体积收缩。

Activated terminated polyurethane rubber ( PU ) is used to reduce shrinkage of unsaturated polyester resin ( UP ) . Before UP curing , PU and UP can dissolve each other very well .

聚氨酯橡胶是一种难切削加工非金属材料，材料软、弹性大且导热性较差，因此很难加工到要求的形状精度、尺寸精度及表面粗糙度。

Polyurethane ( PU ) rubber is difficult to be fabricated into the required precision in form , dimension and surface roughness for it is soft , high in elasticity and bad in thermal conductance .