聚酯纤维

jù zhǐ xiān wéi
  • polyester
聚酯纤维聚酯纤维
  1. 掺聚酯纤维沥青混合料性能评价及施工工艺研究

    Performance Evaluation of Asphalt Mixture with Polyester Fiber Addition and Construction Project Study

  2. 不同密度等级绕制滤心的聚酯纤维回收聚酯瓶片料纺制油毡基布用涤纶短纤维的生产工艺

    Graded-density spun polyester Study on Production Process of Polyester Staple Fiber for Roofing Felt Using Recycled Bottle Flakes

  3. 对一种PVDF涂层的聚酯纤维膜材进行实验研究。

    A kind of PVDF membrane material was experimentally studied .

  4. DMA法分析聚酯纤维无定型区结构

    Analysis of the Structure of Amorphous Area in Polyester Fibers with DMA Method

  5. PTT纤维是一种性能优异的聚酯纤维。

    PTT fiber is a kind of polyester fiber , and it has superior property .

  6. 对苯二甲酸(TA)是合成聚酯纤维的重要原料,目前主要采用PX液相氧化法生产。

    Terephthalic acid is an important raw material for the manufacture of polyester fiber and plastics .

  7. 新型聚酯纤维PTT

    New Polyester Fiber PTT

  8. 高收缩性DMT、DMI、SDMI/EG三元共聚酯纤维的结构与性能

    The Supermolecular Structure and Properties of High-Shrinkage DMT 、 DMI 、 SDMI / EG Copolyester Fibers

  9. 因此,PTT聚酯纤维在工程塑料、纤维尤其在地毯领域等极具有开发和应用价值。

    So PTT polyester fiber has the worthiness of development and the application in engineering plastics and fiber particularly in the carpet realm .

  10. 试验结果表明:纳米炭黑分散体系对经过改性剂EP处理的聚酯纤维具有较高的上染性,且与分散染料有较好的染色相容性。

    The results showed that nano carbon black dispersoid had high dye-uptake on polyester fiber modified by reagent EP in advance and good compatibility with disperse dye .

  11. 水性聚氨酯与PVDF基疏水涂层的制备、结构及性能2.对一种PVDF涂层的聚酯纤维膜材进行实验研究。

    Synthesis , Characterization and Performances of Waterborne Polyurethane Coatings and PVDF Based Hydrophobic Coatings 2 . A kind of PVDF membrane material was experimentally studied .

  12. 对京石高速公路路面进行罩面补强,采用聚酯纤维砼、SBS改性沥青及玄武岩,可有效的防止病害的产生,值得推广应用。

    The cover-layer construction for Jing-Shi expressway applying polyester fiber concrete , SBS modified asphalt and basalt , can prevent effectively the disease of pavement , and is worth being popularized .

  13. 今年9月份,中国公司JNFibersInc.同意斥资4500万美元在南卡罗来纳州建厂,将废旧塑料瓶转化为聚酯纤维,用于填充枕头和家俱。

    In September , JN Fibers Inc. of China agreed to build a $ 45 million plant in South Carolina that turns plastic bottles into polyester fibers used to stuff pillows and furniture .

  14. 介绍了日本ITOI纺织有限公司开发的一种新型可洗天鹅绒,它采用75%的莫代尔与25%的聚酯纤维交织而成。

    This article introduces a new washable velvet developed by Japan ITOI TEXTILE CO. , LTD , which is made of75 % Rayon and25 % Polyester .

  15. 用开炼机混炼法,研究了有机短纤维(聚芳砜纤维、聚酯纤维)和无机短纤维(碳纤维、玻璃纤维)对硅橡胶的补强作用,并用SEM观察了微观形态。

    The reinforcement of short organic fibers ( polyaryl sulfone fiber , polyester fiber ) and inorganic fibers ( carbon fiber , glass fiber ) on silicone rubber was studied by mixing mill and the morphology was observed by SEM .

  16. 经间甲酚浸泡溶胀后,采用二苯甲酮(BP)的丙酮溶液浸泡,紫外光辐射接枝改性聚酯纤维的吸湿性,研究了辐射接枝条件对纤维回潮率的影响。

    The hygroscopicity of polyester fiber was improved by irradiation grafting modification after soaking and swelling in m-cresol and in the solution system of benzophenone and acetone successively . The effect of irradiation grafting conditions on moisture regain of polyester fiber was studied .

  17. 乙二醇(简称EG)是一种具有非常重要战略意义的石油化工基础有机原料,主要用于生产聚酯纤维、防冻剂等行业,用途十分广泛。

    As the significant strategic and organic basic bulky raw materials , ethylene glycol ( EG ) is used extensively in Petroleum Chemical , mainly in the production of polyester fiber and antifreeze and other industries .

  18. 虽然PLA纤维和PET纤维同属聚酯纤维,但两者在湿处理条件下的强度损伤差异极大。

    In this paper , the strength loss es of PLA and PET fiber are comparatively studied . Although these two fibers are all the polyesters , the behavior of strength loss during the wet processing is totally different .

  19. 研究了冷拉伸对聚酯纤维聚集态结构、聚酯纤维回弹性能的影响,并讨论了PTT纤维的弹性回复机理。

    The effect of cold drawing on aggregation structure of PET fiber and the rebounding performance of PET fibers were studied , and the elasticity recovering mechanism of PTT fiber was discussed .

  20. 130℃下分散染料对异形聚酯纤维在高温高压条件下进行同浴染色时,低温型分散染料分散红3B对纤维的匀染性较好。

    The levelness of low temperature type Disperse Red 3B dye on PET fiber at 130 ℃ in one dye bath condition was better than other disperse dyes .

  21. AC-13I型聚酯纤维沥青混合料的配合比设计

    The Mix Proportion Design of AC-13I Asphalt Mixture with Polyester Fiber

  22. 叙述Hoechst公司的Trevira高强聚酯纤维及其织物的性能和在建筑材料中的应用。

    The properties of Hoechst Trevira high strength polyester fibre and fabric and its application to building materials are described .

  23. 韩国DISEVEN聚酯纤维吸音装饰艺术板;

    Republic of Korea DISEVEN polyester fiber sound-absorbing panels decorative arts ;

  24. 膜结构工程所用膜材一般由基材、涂层、面层组成,常用的基材主要有玻璃纤维织物与聚酯纤维织物,而涂层则有聚氯乙烯(PVC)和聚四氟乙烯(PTFE)。

    Architectural membrane materials in membrane structures are mainly constitute of substrate , coating and surface layer . Substrate always are glass fabric and polyester fabric , while the coating is a polyvinyl chloride ( PVC ) and polytetrafluoroethylene ( PTFE ) .

  25. 同时还首次使用高强度聚酯纤维和超高相对分子质量聚硅氧烷树脂作为PVC-U体系的改性剂,并探讨了各自的改性效果。

    Besides , high strength polyester fibers and ultra high molecular weight silicone are used as modifiers for PVC-U compounding systems for the first time , and their modification effects are involved .

  26. 提纯染料在超细超亮光聚酯纤维上的吸附等温线属Nernst分配型吸附,分配系数随染色温度的升高而升高。

    The isotherm of pure disperse dyes on bright super-fine polyester fiber belonged to the Nernst model and the partition coefficients increased with the increase of dyeing temperature .

  27. 结果表明:阳离子Gemini表面活性剂(DC2-12、DC2-16)对超细聚酯纤维水解有明显的促进作用;

    The results showed that the cationic gemini surfactants ( DC2-12 ? DC2-16 ) had an obvious promoting effect on polyester superfine fiber ;

  28. 从分散染料选择、染色温度、染浴pH值、染色时间、升温速率、染料提升力以及染色牢度等方面研究了新型聚酯纤维PTT的染色工艺。

    The dyeing process of PTT , a new polyester fiber , was researched in the fields such as dye selection , dyeing temp . , pH value of the dyeing bath , dyeing time , temp . raising speed , dye build-up and dye fastness .

  29. 可与许旺细胞进行联合培养的支架材料包括聚酯纤维、聚羟基乙酸、聚乳酸、聚羟基乙酸和聚乳酸共聚物、ZQ膜、壳聚糖等等。

    The three-dimensional scaffolds that could be used to association culture with Schwann cells , including polyester fiber , PGA , PLA , PLGA , ZQ membrane , and chitosan fiber etc.

  30. 用12只偶氮染料和13只蒽醌染料染成1/1标准浓度的PLA织物.其光褪色机理和影响因素与聚酯纤维和醋酸纤维相同,但褪色速度较快,耐晒牢度要差1-2级;

    When PLA fabrics of 1 / 1 Standard depth were dyed with 12 azo dyes and 13 anthraquinone dyes , their fading mechanism was the same as that of polyester and acetate fibers , but fading was considerably faster and lightfastness was 1-2 levels lower .