线性聚乙烯

本论文对比性地研究了改性后的超支化及线性聚乙烯亚胺（PEI）作为反相纳米胶束对极性客体分子的包裹及释放行为。

Modified hyperbranched and linear polyethylenimine ( PEI ) as nano-sized inverted micelles for the encapsulation and release of polar guest molecules was comparatively studied .

线性聚乙烯搪衬设备缺陷的现场修复

Repair for the LLDPE-Lining Equipment on Site

叙述了己烯-1是提高线性聚乙烯性能的重要单体之一。

1-Hexene is one of important monomers with which the properties of linear polyethylene can be improved .

线性聚乙烯熔体的强异常流动行为源于其分子量高、分子链缠结点多、熔体的界面吸附性强。

The extreme flow behaviors of linear PE melts are caused by the high molecular weight , more entanglements and strong adsorption of melt at capillary wall .

研究了线性双峰聚乙烯（LBPE）、高压聚乙烯（LDPE）与线性低密度聚乙烯（LLDPE）共混物熔体的流变行为和力学性能。

Melts rheological behavior and Mechanical Properties of linear bimodal polyethylene ( LBPE ) / low-density polyethylene ( LDPE ) / Linear Low Density Polyethylene ( LLDPE ) blends were studied .

采用DSC方法研究了纳米二氧化硅（SiO2）填充线性低密度聚乙烯（LLDPE）的熔融特性。

The melt property of LLDPE filled with nano-scale SiO 2 was studied .

研究了轮胎胶粉/线性低密度聚乙烯（LLDPE）共混材料的性能。

Property of blend of tyre rubber powder / LLDPE was studied .

冲压设计在LLDPE洞（线性低密度聚乙烯）薄膜。

Designed for punching holes in LLDPE ( Linear Low Density Polyethylene ) film .

线性低密度聚乙烯（LLDPE）在振动剪切复合应力场中挤出成型时的流变行为研究

An Investigation of Rheology Behavior of LLDPE under Vibration and Shear Complex Stress Field in Extrusion Molding

本文研究了基体接枝甲基丙烯酸（MAA）对氢氧化铝（Al（OH）3）填充线性低密度聚乙烯（LLDPE）电气性能的改善。

Improvement of the electrical properties of LLDPE compound highly loaded with aluminium hydroxide by grafting methacrylic acid to the matrix is investigated .

介绍粒状线性低密度聚乙烯（以下简称LLDPE）在国产单螺杆挤出机加工试验和相应的工艺技术。

The paper introduces the processing test and technique of particle LLDPE on single-screw extruder made in China .

据市场消息称，唯一走弱的PE产品是C4线性低密度聚乙烯（LLDPE）。

The only PE grade that many market sources considered to be weak was C4 linear low density PE ( LLDPE ) .

纽曼帝克集团的执行机构气缸孔打孔机非常适合在LLDPE冲压洞（线性低密度聚乙烯）薄膜。

The Numatics Actuator Group Hole Punch Cylinder is perfect for punching holes in LLDPE ( Linear Density Polyethylene ) film .

本文研究了电子束辐照剂量对线性低密度聚乙烯（LLDPE）、乙烯-醋酸乙烯酯共聚物（EVA）及其共混物凝胶含量和力学性能的影响。

The effect of electron beam irradiation dose on the gel content and mechanical property of LLDPE , EVA and their blends has been studied .

采用玻璃微珠（GB）改性聚丙烯（PP）和线性低密度聚乙烯（LLDPE），对玻璃微珠的用量、粒径和复合材料加工方法对材料的力学性能的影响进行了比较研究。

The effects of glass bead ( GB ) content , diameter and processing route on the mechanical properties of glass bead filled PP and LLDPE were comparatively studied .

利用振动剪切挤出装置研究了线性低密度聚乙烯（LLDPE）在振动与旋转剪切复合力场中挤出成型时的流变行为。

The new extrusion equipment has been designed to research the rheological behavior of LLDPE extrusion moulding in complex stress filed of vibration and shearing .

采用高乙烯基含量硅橡胶（PDMS）与线性低密度聚乙烯（LLDPE）进行熔融共混，并添加阻燃母料，制得LLDPE/PDMS阻燃共混物；

Flame-retardant LLDPE / PDMS blends were prepared by melt blending of LLDPE , silicone rubber PDMS containing high content of vinyl group and flame-retarding master-batch .

应用毛细管流变仪，考察了线性低密度聚乙烯（LLDPE）熔体于短口型挤出中的胀大现象及其影响因素。

The extrudate swell behaviour and the factors affecting it during short die extrusion of linear low density polyethylene ( LLDPE ) melt have been investigated by using a rheometer .

利用苯并氮杂卓镍催化剂和茂金属催化剂的复配，实现了对乙烯的原位聚合改性，制备了线性低密度聚乙烯（LLDPE）。

In the second part , combination of metallocene metal catalyst and late transition metal complexes were used to in situ polymerize ethylene to prepare LLDPE using MAO as co-catalyst .

简要分析了国内线性低密度聚乙烯装置的生产能力、产品牌号、市场需求和产品结构，对齐鲁LLDPE装置改造后产品的结构调整及开发方向提出了建议。

This paper analyzed briefly the capacity , product brands , market demand and products structure of LLDPE in our country , suggested product structure adjustment and developing trend of Qilu LLDPE plant after technical revamp .

研究了在二甲苯溶剂中，以过氧化二苯甲酰（BPO）为引发剂，线性低密度聚乙烯（LLDPE）接枝马来酸酐的反应。

The reaction of maleic anhydride ( MAH ) grafted onto linear low density polyethylene ( LLDPE ) in xylene solvent in the presence of benzoyl peroxide ( BPO ) as initiator has been investigated .

本文选用茂金属线性低密度聚乙烯（m-LLDPE）作为研究对象，向其中分别加入不同含量的三种光敏化剂，系统地研究了m-LLDPE薄膜的光降解特性。

We put three kinds of photosensitizer into metallocene-linear low density polyethene ( m-LLDPE ), Then photo degradable behavior of m-LLDPE had been researched systematically .

中国石油抚顺石化公司在8万t/a线性低密度聚乙烯（LLDPE）装置上，采用加拿大DuPont溶液法聚合工艺，在注塑料PE2911的基础上，开发出了流动性更好的工业产品PE2912。

High fluidity polyethylene ( PE ) 2912 was developed on the basis of injection grade PE 2911 by Canada DuPont solution polymerization process in the 80 kt / a linear density polyethylene ( LLDPE ) unit .

采用溶液插层和熔融插层法制备了聚碳酸丙烯酯（PPC）／Mg3AlLDH、线性低密度聚乙烯（LLDPE）／Mg3AlLDH和Nylon6／Mg3AlLDH剥离纳米复合材料。

The polymer / LDH nanocomposites were synthesized by solution intercalation and melt intercalation methods . Poly ( propylene carbonate ) / Mg_3Al LDH , linear low density polyethylene ( LLDPE ) / Mg_3Al LDH and Nylon 6 / Mg_3Al LDH exfoliated nanocomposites were prepared .

研究了马来酸酐接枝线性低密度聚乙烯（LLDPE-g-MAH）增容剂对尼龙66/超高分子量聚乙烯（PA66/UHMWPE）复合材料力学性能和形态结构的影响。

The effects of LLDPE-g-MAH compatilizer on the mechanical property and morphological structure of nylon 66 / ultrahigh molecular weight polyethylene ( PA66 / UHMWPE ) composite were investigated .

线性低密度聚乙烯&炭黑复合物的正温度效应

The PTC Effect of Carbon Black Filled Linear Low Density Polyethylene

线性低密度聚乙烯装置扩能改造现状分析及方案

Present Situation Analysis and Schemes for Capacity Expansion of LLDPE Plants

新型高性能线性低密度聚乙烯电缆料

Linear Low Density Polyethylene-A New Type Cable Compounds with High Performance

含氟改性剂在线性低密度聚乙烯树脂加工中的应用

Application of Fluorine-Bearing Modifier in Linear Low Density Polyethylene Resin Processing

纳米二氧化硅填充线性低密度聚乙烯的等温结晶动力学

Kinetics of isothermal crystallization for LLDPE filled with nano-SiO_2 Linear Prediction