纤维增强

纤维增强塑料（FRP）在桥梁建设中的应用现状

FRP applications in bridge construction

而纤维增强塑料（FRP）的复合材料加固方法由于其具有轻质高强、易于现场施工和良好的耐腐蚀性等优良性能，在工程界逐渐得到广泛应用。

As FRP composite material has a series of advantages such as lightweight , high strength , easy construction and good resistance to corrosion and fatigue , the retrofitting method utilizing FRP is widely used in civil engineering .

纤维增强PET复合材料结晶行为的研究

Study on the Crystallization Behaviors of Fiber - reinforced PET Composites

碳纤维增强水泥压敏效应AC测试方法探讨

Investigation on the Method of AC Measurement of Compression Sensibility of Carbon Fiber Cement

SiC纤维增强复合材料基体裂纹偏移机理的有限元分析

Finite element analysis of matrix crack deflection mechanisms in fiber-reinforced composites

玻璃纤维增强PP在汽车风扇中的应用

Application of Glassfiber Reinforced PP in the Fan of Automobile

疲劳对铝基SiC纤维增强复合材料界面性能影响

Effect of fatigue on interfacial shear strength of SiC fiber reinforced MMC

纤维增强钛基复合材料界面剪切强度的FEM分析

FEM Modeling of Interfacial Shear Strength in SiC - Fibre Reinforced Titanium Matrix Composites

δ-Al2O3短纤维增强Al基复合材料的强度与断裂分析

The tensile strength and fracture mode of δ - alumina short fibre reinforced aluminium alloys

玻璃纤维增强ABS力学及加工性能

Mechanical and processing characteristics of glass fiber / abs composite

用Weibull模数表征炭纤维增强树脂基复合材料的力学性能

Characterization of the mechanic properties of CFRP with Weibull distribution theory

SiC涂层碳纤维增强铝复合丝的机械性能及其界面特性

Tensile properties and interfacial feature of SiC coated c / al composite wires under isothermal heat treatment

高强高弹PVA纤维增强水泥基材料的研制与性能

Production and Properties of Cementitious Composites with High-Strength and High Modulus PVA Fiber Reinforcement

碳纤维增强塑料（CFRP）加固混凝土柱机理研究

Mechanics research on the Carbon Fibre Reinforced Plastic ( CFRP ) reinforcing the concrete pole

本文成功制备了玻璃纤维增强聚丙烯复合材料，并对复合材料进行了力学分析，SEM和DSC分析。

This article successfully prepared glass fiber reinforced polypropylene composite materials , and analysis in mechanics , SEM and DSC .

芳纶纤维增强PPS复合材料耐水性能的研究

Water Resistance Properties of Aramid Fiber Reinforced PPS Composite

PTFE对纤维增强尼龙66材料摩擦学性能的影响

Effect of Filled PTFE on Friction and Wear Property of Glass Fiber Reinforced Polyamide 66 Composites

共混方法和设备对聚酯短纤维增强动态硫化EPDM／PP共混型热塑性弹性体性能的影响

Effects of blending methods and equipment on properties of short fiber reinforced epdm / pp blending thermoplastic elastomer

13m空心板梁用碳纤维增强复合材料（CFRP）加固后的可靠度分析

Reliability Analysis of 13m Hollow Plate Girder Strengthened with CFRP

并对处理前后沥青基炭纤维增强ABS复合材料的机理进行了分析。

The mechanism of fracture was also analyzed through SEM and XPS for pitch based carbon fiber reinforced ABS with and without surface treatment .

热压反应烧结制备短纤维增强C-SiC复合材料的组织和性能

Microstructure and Properties of Short-fiber-reinforced C-SiC Composites Fabricated by Hot-pressing Sintered

研究了挤压铸造Al2O3短纤维增强铝基复合材料在350℃恒应力条件下的蠕变行为。

The constant stress creep behavior at 350 ℃ was investigated for Al_2O_3 fiber reinforced Al based composite fabricated by squeeze casting .

短Kevlar纤维增强的热塑性聚氨酯弹性体

Thermoplastic polyurethane elastomers reinforcing with short Kevlar fibre

3种纳米粒子对高强玻璃纤维增强EAM树脂复合材料桩钉基体树脂力学性能的影响

Effects of three different nanometer particles on mechanical properties of dental FRC posts matrix resin

采用先驱体浸渍法制备了3种不同纤维增强的SiC基复合材料，观察、分析了材料的微观结构、界面成分以及相应的材料性能。

Three different fiber reinforced SiC matrix composites were made by polymer infiltration . The microstructure of the composites and the composition of the composite interfaces were analyzed .

方法：采用家兔热原试验方法，对炭纤维增强壳聚糖复合棒材的24、48、72h三种浸提液样品进行检测。

Methods : Pyrogen test was performed in rabbits with extracted liquid of carbon fiber reinforced chitosan robs .

应用自制微型储能电阻焊机对Al2O3纤维增强铝基复合材料进行了点焊连接，分析了接头的组织形貌。

The resistance spot welding of the Al_2O_3 fiber reinforced Al-matrix composites ( MMCs ) was conducted using a micro-type capacitor discharge welding machine and the microstructural morphology of the joint was investigated .

碳纤维增强PEK-C复合材料中纤维和基体间的界面研究

Study of Interfaces between Fibre and Matrix in Carbon Fibre Reinforced PEK-C Composites

温度及溶质浓度对Mullite短纤维增强的Al-Cu复合材料及其基体合金时效行为的影响

Effects of Temperature and Solute Content on the Ageing Behaviour of the Al-Cu Composite Reinforced by Short Mullite Fibers and Its Base Alloy

因此有必要对影响树脂浸润纤维增强体的速率的因素进行细致、深入地研究，以满足树脂对纤维的充分浸润及RTM工艺中的流动充模要求。

So it is necessary to study on the factors of influencing soakage , to satisfy the resin soaking sufficiently and permeating the mold .