硼纤维

硼纤维拉伸破坏的断裂特征

Tensile Fracture Features of Boron Fibre

硼纤维的拉伸断裂由缺陷引发，其强度分布符合Weibul分布函数。

Tensile fracture of boron fibre originates from its intrinsic defects . The its tensile strength distribution coincides with the weibull distribution model .

CVD法生产硼纤维过程中BCl3的回收再利用的研究

A Study of the Recycling of BCl 3 during CVD Boron Fiber

制得的氮化硼纤维具有B-N键、B-N六元环的特征吸收；

The resulted boron nitride fiber showed the characteristic adsorptions of B-N bond and B-N hexahydric ring .

氮化硼纤维热处理工艺对其性能影响的研究

Influence of Heat Treatment on the Performances of Boron Nitride Fibers

氮化硼纤维先驱体聚合物的合成及其表征

Synthesis and Characterization of the Precursor for BN Ceramic Fiber

前驱体法制备氮化硼纤维的研究进展

Advances in Study on Synthesis Methods of BN Fibre Precursor

用电子显微技术研究氮化硼纤维的微观结构和力学性能

The study on microstructure and mechanical properties of BN fiber by electronic microscope

湿化学法合成先驱体制备氮化硼纤维的研究

Research on Synthesis of BN Fibers with Precursors Prepared by Wet Chemical Method

防热材料用氮化硼纤维的制备及其在空间技术领域中的应用

Preparation of BN fiber for Thermostable Material and Its Application in Space Field

本文介绍了硼纤维的生产方法、性能及应用。

This paper introduces the production method , properties and application of boron filaments .

修复用硼纤维／环氧单向复合材料的破坏模式研究

Failure Modes of Unidirectional Boron Fiber / Epoxy Resin Composites for Repair of Damaged Aluminum

铝合金板厚度对硼纤维/环氧复合材料单面修复效果的影响

Effects of aluminum alloy plate thickness on single-sided repair efficiency for boron fiber / epoxy composites

硼纤维增强环氧树脂

Boron fiber reinforced epoxy resin

利用化学转化法制备氮化硼纤维的反应热力学动力学研究

Study on Reactive Kinetics and Thermodynamics Mechanisms of BNf in the Low Temperature Nitriding Process Using Inorganic Precursors

氮化硼纤维兼备了氮化硼材料和纤维材料各自所特有的多种优良性，极具良好的应用前景。

Boron nitride fibers which possess the excellent properties of both born nitride material and fibrous material , show a very high promising in some applications .

用扫描电镜观察1700℃制得的氮化硼纤维的直径为2-5μm，长径比为20-100，氮含量为53.46%。

The boron nitride fiber prepared at 1 700 ℃ had the diameter 2-5 μ m , length-diameter ratio 20 - 100 and nitrogen content 53.46 % .

结果表明：当树脂基体的断裂延伸率较小时，硼纤维/环氧单向复合材料的破坏模式主要是非累积型破坏。

The results show that the failure modes of the unidirectional Bf / epoxy resin composites are mainly the non-accumulating failure when the elongation to fracture of epoxy resin is small .

对该文考察的碳纤维/环氧、玻璃纤维/环氧、硼纤维/环氧复合材料而言，内压管最佳的缠绕角位于45°~55°的范围内。

As for the pipes made from Carbon / epoxy , Glass / epoxy and Boron / epoxy composites , the optimal winding angle lies in the region of 45 °~ 55 ° .

以光学显微镜和扫描电子显微镜为主要手段，观察和分析了用纤维拉伸破坏的断口表面，结果表明：硼纤维的断裂均起源于固有的缺陷和裂纹。

In this paper the fracture surface of boron fibre are observed and analysis by optical microscope and scanning electron microscope . The results show that fracture of boron fibre originates from its intrinsic defects and cracks .

通过对瞬时临界荷载与持久临界荷载的分析，以硼纤维环氧树脂基复合材料为例，揭示了粘弹性层合板和层合圆柱壳在蠕变荷载下的延迟失稳机制。

By the investigation of instantaneous critic loads and durable critic loads , the mechanism of creep buckling of boron fiber / epoxy matrix laminated plates and boron fiber / epoxy matrix cylindrical shells exhibiting viscoelastic behavior is revealed .

以塑料为基体，用玻璃纤维、碳纤维、硼纤维、尼龙纤维等增强的复合材料，其强度和刚度都已接近或超过金属材料，进一步扩大了塑料在汽车上的应用范围。

Composite material is matrix with plastics and strengthen use glass fiber , carbon fiber , peng fiber and nylon fiber etc. Its strength and rigidity has been closed or exceeded metal material , and has enlarged scope further that the application of plastics in automobile .

含硼Si-N-C纤维的高温结构组成研究

Studies on the Structure and Composition of Si-N-C Fibers Containing Boron at High Temperature

研究结果表明，聚合物的脱除与否对氮化硼纳米纤维产品的纯度具有明显的影响。

The results showed that the removal of the PVB greatly affected the purity of the boron nitride nanofibers .

硼泥陶粒纤维混凝土外墙板的研制

The Study of boron sludge ceramisite fibre concrete building wall slab

硼钛复合纤维拉伸曲线分析

Analysis of Stress-Strain Behavior of B_w / Ti Composite Fiber

氮化硼（BN）纤维微结构与力学性能的关系

The Microcosmic Structure of Boron Nitride ( BN ) and its Mechanical Properties Piao

BN纤维（BNf）集成了氮化硼陶瓷和陶瓷纤维材料的兼优性能，具有良好的高温力学强度、优异的介电性能，并且其耐高温、耐化学腐蚀性优异。

As ceramic fibers , boron nitride fiber ( BNf ) combines a variety of excellent performance of nitride ceramic materials and fiber materials . Such as elevated temperature mechanical strength , excellent dielectric properties , high temperature and chemical resistance and other characteristics are all the excellent performance .

低硼无碱玻璃纤维工业性试验报告

An industrial test report on E-glass fibres with low boron oxide content

可以拉制没有缺陷的铝硼硅酸盐玻璃的纤维。

It is possible to draw fibres of an aluminoborosilicate glass without defects .