电镀法

  • 网络Electroplating;Electrodeposited Method;plating
电镀法电镀法
  1. 为了得到质量较好的Fe-C合金膜,在石英玻璃上探索了多种成膜方法:PVD法(物理气相沉积)和电镀法等。

    Many methods , such as PVD ( Physical Vacuum Deposit ), electroplating , etc , have been explored on quartz glass in order to form aFe-C alloy film with better quality .

  2. 复合电镀法研制强化传热管的新工艺

    A New Technology of Making Enhanced Heat-transfer Tube by Composite Electroplating

  3. 为了节约贵金属和获得功能性镀层,采用直流和脉冲电镀法在A3钢片上获得了镍镀层。

    In order to save precious metal and get functional coating , pulse and direct current was used for plating Ni coatings on A3 steel plates .

  4. 提出了一种利用脉冲电镀法在金属基板表面沉积一层具有催化活性的镍纳米晶,再将该基板放入乙醇火焰中合成碳纳米管(CNTs)和碳纳米纤维(CNFs)的方法。

    It is introduced a novel method for synthesizing carbon nanotubes ( CNTs ) and carbon nanofibers ( CNFs ) in ethanol flames by using a pulse plated Ni nanocrystalline layer on the surface of metal substrates as catalyst .

  5. 电镀法测表面应力

    Surface Stress Measurement by Means of the Electroplating Method

  6. 要现代工艺中,一般是用电镀法将锡镀在钢片上。

    In modern operations tin is generally deposited on the steel plate by electrolytic action .

  7. 采用电镀法在铜箔上制得了金属锡电极,用作锂离子蓄电池阳极材料进行了电化学测试。

    The metal tin electrodeposited on cupper foil was used as anode material of lithium-ion batteries .

  8. 目前,国内外解此类问题主要采用的工艺方法是电镀法。

    Now , the major technology was adopted is electroplate law in domestic and foreign country .

  9. 结果表明:采用电镀法可以得到球形Pb/Sn凸点,50μm的厚胶工艺是可行的。

    The results show that semi-sphere shaped Pb / Sn bumps can be obtained by whirl coating of 50 μ m.

  10. 金属结合剂磨具的制造工艺有粉末冶金法和电镀法两种,主要用于超硬磨料固结磨具。

    Metal-bonded grinding tools manufacturing process are two kinds of powder metallurgy and electroplating method is mainly used in super-hard abrasive Bonded Abrasives .

  11. 母粒掺混法与传统的电镀法、真空镀膜法生产的银色塑料制品相比,该法直接掺混金属粉,因此减少了设备投资,降低了生产成本,改善了车间卫生条件。

    This metal powder blending method reduced the equipments and producing costs , improved the sanitation compared with traditional electroplating and vacuum metallizing methods .

  12. 二层覆铜板的制备方法有多种,有涂布法、层压法、溅射/电镀法。

    There have many methods to make two layer flexible copper clad laminate , such as coating , laminating and sputtering / plating methods .

  13. 该工艺采用电镀法制造金刚石复合基块作为金刚石圆锯片刀头的骨架与磨料,再通过低熔点金属粉末粘结制成金刚石圆锯片刀头。

    By this method , diamond composites are made by electroplating and segments are produced by applying the metal powder binder with low melting points .

  14. 与常用的电镀法和室温溅射法相比,大幅度的降低了电极的载铂量,减小了电池的制作成本。

    Comparing with the conventional electrochemical deposition , room temperature sputtering method , the platinum loading was dramatically lowed , which reduced the cost of the NDSC .

  15. 电镀法以镍或镍钴合金等为电镀金属,按电镀工艺将磨料固结在基体上,制成固结磨具。

    Plating method with nickel or nickel-cobalt alloy plating metals etc. , by electroplating process will be abrasive consolidation in the matrix , making a consolidation of abrasives .

  16. 根据近年来国内外结晶器表面强化的研究现状,简要介绍了目前结晶器铜板表面处理的几种方法:电镀法、热喷涂法、化学热处理法以及具有潜在发展前景的激光熔覆法。

    Based on the current study state of surface strengthening on copper crystallizer , several surface treatment means , such as electroplating , thermal spraying , penetration and laser cladding technique with potential development are described .

  17. 用电镀法制作了铜-钢双金属杆,并测试了它和45钢杆的基本力学性能(拉伸,压缩,冲击韧性),对双金属杆和45钢杆基本力学性能进行了比较分析。

    The copper-steel bimetal rod was made by electro-plating . The properties ( stretch , compression , impact ductility ) of bimetal and 45 ~ # ( Fe-C , 0.045 % ) samples were tested and the results were compared and analyzed .

  18. 采用电镀法制作Ag/AgCl参比电极,设计制作三电极彼此垂直型(A型)和工作电极与参比电极和辅助电极垂直型(B型)毛细管电泳芯片。

    Using electroplating method produced Ag / AgCl reference electrode , designed three-electrode A type capillary electrophoresis chip structure that are vertical to each other , and B type capillary electrophoresis chip structure that working electrode is perpendicular with reference electrode and auxiliary electrode .

  19. 对电镀扩散法样品的分析结果表明,样品的元素分布较为均匀,微观组织结构也比较致密。

    Investigating samples made by electro-plating diffusion method , We found that they have even element distibution and compact microscopic structure .

  20. 电镀成形法主要存在环境污染问题、产量小、包覆厚度薄、界面结合弱等问题。

    Electroplating forming method brings the pollution of the environment , production of small , thin coating , bonding and weak issues .

  21. 采用电镀铬法在氢化锆表面制备了氢渗透阻挡层,分析了电镀工艺参数对镀层生长的影响,并对镀层的阻氢效果进行检测。

    Hydrogen permeation barrier was manufactured by electrodeposited chromium on zirconium hydride and the anti-permeation effect of the Cr coatings were investigated .

  22. 电镀废水膜法回用作为一种高效低能耗的水处理技术,在目前诸多电镀企业已经得到了广泛的应用。

    Membrane reusing technology has been widely used in electroplating wastewater treatment for its high efficiency and low power .

  23. ABS塑料局部电镀&电解屏蔽法

    Local Plating of ABS Plastic with Electrolytic Shield